SBM

Drilling of 250mm dia Single Under Reamed Piles of 3.00 mts depth using VRCC(1:2:4) including C&C of all amterials and all labour charges etc., complete Piles

Drilling of 250mm dia Single Under Reamed Piles of 3.00 mts depth using VRCC(1:2:4) including C&C of all amterials and all labour charges etc., complete Pile CAP

Stone dust filling in basement with watering and tamping including cost and conveyance of all materials and all labour charges etc complete. toilet and urinals inside- RAMP

CC(1:4:8) using 40mm HBG metal including cost and conveyance of all materials and all labour charges etc complete. toilet and urinals inside- RAMP SLOPE

Vibrated Reinforced Cement Concrete(1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc. but excluding cost of steel and its fabrication charges. column

Vibrated Reinforced Cement Concrete(1:2:4) using 20mm HBG chips including cost and conveyance of all materials and all labour charges etc. but excluding cost of steel and its fabrication charges.charges Plinth beam A/R

Vibrated Reinforced Cement concrete (1:2:4) using 20 mm HBG chips including cost and conveyance of all materials and all labour charges etc.but excluding cost of steel and its fabrication charges Roof beams

Vibrated Reinforced Cement concrete (1:2:4) using 20 mm HBG chips including cost and conveyance of all materials and all labour charges etc.but excluding cost of steel and its fabrication chargescharges Roof slab for 115mm thick.

Brick Masonary in CM(1;6) using 2nd class Country Bricks inclufding C&C of all materials and all labour charges etc complete

Cost, supply of HYSD Steel Bars (FE-500) including fabrication charges such as cutting, bending and binding grills including cost of binding wire and all labour charges etc. complete

Plastering in CM(1;5) with 12mm thick including C&C of all materials and all labour charges etc complete.

Flooring with ceramic tiles 8 to 10mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 600x600mm of IS: 13711,13712,13630 of any colour set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depth of slabs laid on already laid cement concrete bed set over base coat of CM (1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sqm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., (IC 7-6)

Providing dadooing to walls with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work.

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazedwith 'P' trap

Supply and fixing low down porcelain flushing tank 10 Lit Capacity with internal components

Painting to new walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of appropriate primer of approved brand, making three coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete., for finished item of work as per SS 911 for Internal walls (APSS No: 912)

Leach Pits ( RCC rings of 1mt dia )

1000mm Cover Slabs

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail &bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work (BMT-N.02) 2730+CP

Earthwork in excavation for structures as per drawing and technical specifications Clasue 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical specification 305 MORD/304 MORTH

Providing & Placing on Terrce (at all Floor levels) Polyethylene water storage tank with Double Layer approvedbrand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fitting & base support for tank.