Kerala

Active

Works

Civil Works - Water Works

State Plan-2026 -2027 UWSS to Mannarkkad Municipality and adjoining panchayath -Pipe Line Extension -from 1st Mile to Hill view Nagar In Mannarkkad Municipality Reach-1- General Civil Work

Kerala Water Authority

Mannarkkad | Palakkad, Kerala

Amount: ₹11.5 LCloses: 5 Oct 20265d left

Timeline

Published29 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹11.5 L

EMD Value

₹28,828

Closing Date

5 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

AEE,PH Sub division ,Ottapalam

Address

AEE,PH Sub division ,Ottapalam

Work Description

State Plan-2026 -2027 UWSS to Mannarkkad Municipality and adjoining panchayath -Pipe Line Extension -from 1st Mile to Hill view Nagar In Mannarkkad Municipality Reach-1- General Civil Work

Tender Information

Tender ID

2026_KWA_874459_1

Reference Number

04/2026-27/AEE/PHSD/OTP

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Mannarkkad

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

Required1)BOQ/ Tender schedule (.xls)

Required2)Bidder valid registration certificate/Valid Contractor license (.pdf)

Required3) Preliminary agreement must be in Rs.200/- stamp paper duly filled . (.pdf)

Required4)Form 83 84/Bid documents with NIT duly signed (.pdf)

Required5)GST registration Document (.pdf)

Required6)Pan card of the bidder (.pdf)

Required7)Bid submission fee remittance details (.pdf)

Fee & Financial Details

Tender Fee Amount

₹2,760

EMD Fee Amount

₹28,828

Important Dates

Last Activity

29 Sept 2026

Published

29 Sept 2026

Bid Opening

6 Oct 2026

Download Starts

29 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

29 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (28 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charge
1.001	100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.	87	metre	-	-
1.002	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	450	cum	-	-
1.003	100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.	400	metre	-	-
1.004	100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.	420	metre	-	-
1.005	100.98.1008:Engaging Coolie.	5	no	-	-
1.006	100.98.1009:Engaging Fitter ( grade 1).	5	no	-	-
1.007	OD274187/2025-2026:Welding 100mm (I.D.) G.I pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	-	-
1.008	OD274207/2025-2026:Grinding cut and weld edges of 125mm/100mm/80mm (I.D.) G.I pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	-	-
1.009	OD274189/2025-2026:Inter linking Work from Existing 160mm PVC Pipe to Proposed 110mm PVC Pipe including all costs of Materials Labour chrges Etc. Complete.	1	job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

KWAGeneralConditionsforeTenderingV5.pdf

PDF • 0.69 MB

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

04Form8384.pdf

Tender Documents • 1.81 MB

SpclConditionfortender.pdf

Additional Documents • 0.68 MB

BOQ_1484063.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working charge
1.001	100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.	87	metre	-	-
1.002	100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.	450	cum	-	-
1.003	100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.	400	metre	-	-
1.004	100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.	420	metre	-	-
1.005	100.98.1008:Engaging Coolie.	5	no	-	-
1.006	100.98.1009:Engaging Fitter ( grade 1).	5	no	-	-
1.007	OD274187/2025-2026:Welding 100mm (I.D.) G.I pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	-	-
1.008	OD274207/2025-2026:Grinding cut and weld edges of 125mm/100mm/80mm (I.D.) G.I pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	20	no	-	-
1.009	OD274189/2025-2026:Inter linking Work from Existing 160mm PVC Pipe to Proposed 110mm PVC Pipe including all costs of Materials Labour chrges Etc. Complete.	1	job	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Working charge

1.001

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

metre

1.002

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

450

cum

1.003

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

400

metre

1.004

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

420

metre

1.005

100.98.1008:Engaging Coolie.

1.006

100.98.1009:Engaging Fitter ( grade 1).

1.007

OD274187/2025-2026:Welding 100mm (I.D.) G.I pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.008

OD274207/2025-2026:Grinding cut and weld edges of 125mm/100mm/80mm (I.D.) G.I pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.009

OD274189/2025-2026:Inter linking Work from Existing 160mm PVC Pipe to Proposed 110mm PVC Pipe including all costs of Materials Labour chrges Etc. Complete.

job