Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹92 | ₹92 |
Tender Value
₹1.3 Cr
EMD Value
₹1.3 L
Closing Date
2 Mar 2026, 11:00 amClosed
Renovation work including civil work, SITC of furniture, HVAC work, AV and VC work etc
NSL/CEO/MoMA/NIT/2026/835
NSL/CEO/MoMA/NIT/2026/835
Open Tender-Domestic
Miscellaneous
Tehri Garhwal, Uttarakhand
₹11,800
₹1.3 L
20 Feb 2026
20 Feb 2026
2 Mar 2026
2 Mar 2026
16 Mar 2026
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less
than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar
11.41A 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and
matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch
trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily
11.41A.2 Glazed vitrified floor tiles polished finish of size
Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels in
wooden finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000
mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 100 mm.
Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color
MR with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof SQM 75.00 9127 684525
or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200
mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in
lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the
edges of the panels.
HONEYCOMB BLINDS -Providing & supplying of fabric venetian Window Blinds as per the approved sample,
consisting of 3" vane size having head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM
B221 - 85 extruded profile, powder coated and provided in standard natural white color. The rolling tube should be
made up of aluminium alloy from extruded profile of 34 mm die. The head rail dimensions should be of suitable size
according to the length of head rail and space available and finished with fabric cover matching with the louver
fabric. The cassette should conceal the working mechanism rotary-clutch. (White polycarbonate spring tempered
rotary clutch which raises), lower and tilts the blinds. White polycarbonate limit assemblies control vane over-
MR rotation, located on either side of individual blinds. The room darkening fabric of Blind should be of anti-static SQM 35.00 12295 430325
polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be
of white 100% knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun-
bonded 100% polyester fiber (having green guard certification) treated with soil & dust repellent requiring minimum
regular interval cleaning. GREEN GUARD Gold certified for low-emitting products to maintain Indoor environment.
Upto 80% ultraviolet protection with vanes open and 90% with vanes closed. The shading to be operated by Easy
rise mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved
shade as per direction of Engineer-in-charge.
Providing and fixing cove false ceiling at all height including providing and fixing ol' frame work made of special
scctions, porver pressed frorn M.S. sheets and galvanized with zinc coating of I 20 gms/sqm (both side inclusive) as
per IS : 277 and consisting of angle oleats of size 25 mm wide x I .6 mm thick with flanges ol'27 nrm and 37mm, at
1200 rnur contre to centrc, onc flange lixed to the ceiilng rvith dash l'astener l2 5 mm dia x 50mn, long rvith 6mm dia
bolts, other flange ofcleat fixed to the angle hangers oi25xl0x0.50 mm ofrequtred length with nuts & bolts of rctprired
size and othcr crrd ol angle hangor fixed with intermediate G.[. channcls 45xl 5x0 9 mm running at the spacrng of
mm centre to centre, to which the ceiling section 0.5 mm thiok bottom wedge of 80 rnnr with tapered l)anges ol26
mm each having lips ol 10.5 rnm, at 450 mln centre to centre, shall be fixed in a direction perpendicular to G.L
inlermediate channel rvith connecting clips made out of 2.64 mm dia x 230 mm long G.L wire at every junction.
MR including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the sqm 6.00 1600 9600
perimetcr of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, rvith 25mm long dry wall
screws @) 230 rnm interval, including lixing ol'gypsunr board to ceiling section and perimeter channel with the hclp
of dry wall scrcws of size J 5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and
scluare edges of the board with recommended jointing compound . jointing tapes , finishing with jointing compound
in 3 layers covcring upto 150 mm on both sides ofjoint and two coats of primer suitable for board, all as per
manufacturer's specification and also includrng the cost of making openings fbr light fittings, grills, diffl.rsers, cutouts
lnrade with frame olperimeter channels suitably fixed, all complete as per drawings, lspecification and direction of
the Engir.reer in Charge but excluding the cost of paintaing with.
12.5 rnm thick tapcred edgc gypsum plain board conforming to IS:2095- (Part I)
:201I (Board with BIS certificatron marks)
Digitally signed by AMIT
S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-
decorative type, core of block board construction with frame of 1st class hard wood and well
matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 4 2,392.65 9,570.60
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodi ccoating not less than
9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary
screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary
screws etc. complete (Copper oxidised as per IS 1378)
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair
of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion,
necessary brass screws etc. to suit shutter thickness complete
MR Providing and fixing of double speed control door closer. 32mm piston with necessary screws etc. each 8 1,500.00 12,000.00
SITC of cabinet of size-7000x 1200 x 450 made of plywood with veener finish including all
Add Modification factor on account of GST DSR-2023 @ 0.973 2,82,711.15
Add cost index @3% on base of 100 2,91,192.49
Digitally signed by AMIT
S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT
Supplying and fixing of following ways surface/ recess mounting, vertical
type, 415 V, TPN MCB distribution board of sheet steel, dust protected,
duly powder painted, inclusive of 200 A tinned copper bus bar, common
2.5 neutral link, earth bar, din bar for mounting MCBs (but without MCBs
and incomer ) as required . (Note : Vertical type MCB TPDB is normally
used where 3 phase outlets are required.)
Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5
sq. mm FRLS PVC insulated copper conductor single core cable in
1.1 surface/recessed medium class PVC conduit, with modular switch,
modular plate, suitable GI box and earthing the point with 1.5 sq. mm.
FRLS PVC insulated copper conductor single core cable etc as required.
1.10.3 Group-C (Primary point ) Point 10 1,704.00 17,040.00
Wiring for group controlled (looped) light point/ fan point/call
bell point (without independent switch etc.) with 1.5 sq.mm
1.55 FRLS PVC insulated copper conductor single core cable in surface
/ recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”
curve, miniature circuit breaker suitable for inductive load of following
poles in the existing MCB DB complete with onnections, testing and
commissioning etc. as required.
Supplying and fixing following modular switch/ socket on the
1.24 existing modular plate & switch box including connections but
excluding modular plate etc. as required.
1.24.4 3 pin 5/6 amp socket outlet Each 8.00 136.00 1,088.00
1.24.5 6 pin 15/16 amp socket outlet Each 10.00 219.00 2,190.00
Supplying and fixing following rating, four pole, (three phase and
neutral), 415 volts, residual current circuit breaker (RCCB), having a
sensitivity current 30 mA in the existing MCB DB complete with
2.15 connections, testing and commissioning etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with
1.14 the following sizes of FR PVC insulated copper conductor, single
core cable in surface/ recessed medium class PVC conduit
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 267 13,350.00
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 70 311 21,770.00
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 373 18,650.00
1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Metre 50 621 31,050.00
Digitally signed by AMIT
S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT
Supply and installation of Pre-galvalized metal floor raceways of following
size suitable for wiring of power outlet and data etc complete with
suitable GI coupler /joint sleeves, GI junction box complete etc. as
LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120
lm/Watt ). Supplying, installation, Testing & Commissioning of LED
Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type
of following body material and construction as per IS : 10322 with driver
as per the requirement with Driver efficiency >85%, Operating voltage
AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40
0C, internal surge protection of 2.5 KV with Short & Open circuit
protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare
Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,
Driver & electrical circuitry), of minimum 50000 Burning Hours with 70%
of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K
/ 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching)
Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of
following body material and construction as per IS : 10322 with driver as
per the requirement with Driver efficiency >85%, Operating
voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5
0C to 40 0C, internal surge protection of 2.5 KV with Short & Open
protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare
Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,
Driver & electrical circuitry), of minimum 50000 Burning
Hours with, 70% of initial Lumen maintained till life ends as per LM80
extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K
8.6 /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching)
<3, Maximum power consumption should not more than the specified
rating and Fixture shall be of relevant BIS standard. Manufactures Word
Mark/ Name Engraved/ Embossing/ Screen printing on housing.
complete in all respect i/c external connections with 1.5 sq mm
FRLS/HFFR, PVC insulated copper conductor single core cable and
earthing etc. as required with Minimum 5 year OEM warranty. System
lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report
and all testing required for LED fixtures as per BIS shall be submitted.
Shape size and CCT shall be as approved by Engineer-in-Charge as per
requirement. (Thermal management: heat sink of aluminium housing
such that LED junction temperature shall not rise above 90°C). Powder
coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
Digitally signed by AMIT
S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT
SITC of Pendent type LED profile Light fixture suitble for baffle ceilingr
system power: 15W, Luminous flux of luminaire 16501m, Colour
temperature of 4000/3000/57000 K, CRI > 80, 230 V constant current
driver, 70 o/o of luminous flux after 50,000 operating hours, Enerry
efficient LEDs, Direct light emission, Luminaire profile in aluminium,
MR Polyester powder white coloured coat applied over a 5- stage pre- Metre 48.00 4000 1,92,000.00
treatment, snap fitprismatic diffuser for a homogenous light distribution,
ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring Electronic control
gear, Sliding fixing wire suspension, Protection class I, IP 40, MacAdam
3, T.H.D < l0o/o, driver efficiency 2 880/0, surge protection of 2.5
kV,L=1000 mm, B = 52 mm, H = 64 mm, PL max = 1500 mm etc
complete as required.
Supplying, installation, testing & commissioning of surface mounted LED
MR LED strip light with driver having Long life and color temperature is Metre 50.00 140 7,000.00
4000/3000/57000K complete i/c connection with existing point etc as
Supply, Installation, Testing and Commissiong of 4 KVA with battery
bank True Online Double Conversion UPS 3Phase Input- 3Phase Output
in Parallel Redundant N+1 Configuration IGBT Based Rectifier and IGBT
Batteries:12 V, SMF with minimum VAH capacity suitable for 30
minutes backup with each ups Along with Accessories Rack, Interlinks,
SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per
the directions of the engineer in charge.
UPS should have availability of Input /Output isolator, Inbuilt manual
bypass along with phase sequence corrector. UPS Efficiency shall not be
less than 94% from 25% to 100% Load ,
isolation etc Power factor should be more than 0.9.
Digitally signed by AMIT
S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT MARKET RATE MR AMOUNT
Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type
Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface /
concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile
rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto
3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless
Remote control, suitable for working between 180- 260V with low & high voltage
cutoff and 50 hz ,1 phase AC supply capable of performing cooling,
dehumidification, air circulation of following capacity with Scroll / rotary
compressor. The system shall be able to deliver 100% of the rated capacity upto
42 0C. Min 5 year Original
Heating & Cooling
32.2.6 1.5 TR with 3 Star BEE Rating each 6 41768 250608
Supplying, Installation, testing and commissioning including vaccumiazation and
Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant
piping for VRV/VRF system, complete with fittings, with suitable adjustable ring
32.14 type hanger supports, jointing/brazing including accessories, insulated with XPLE
Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber
tubular sleeves sections of 19 mm thick insulation as given below for Suction and
Liquid lines, all accessories as per specifications etc. as required :
32.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm m 60 256 15360
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2
Digitally signed by AMIT
S.NO Specifications Total Qty Amount
1 Conference Table
Dimension (W) 8000mm X (D) 600mm X (H)750mm (overall depth 2550mm) 1 8,14,414 8,14,414
Supplying and placing in position of conference table as per image/drawing. The work
surface top should be of thickness 36mm top prelaminated particle board with 2mm thick
PVC edge banding. The side panel are made up of 36mm thick prelaminated particle &
modesty panel are made out of 18mm thick prelaminated particle board with 2mm thick
PVC edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder
coated 40-50 microns. Also having a provision of 6 module flip top box & metal raceway
for wire flow. . The product should be as per above given specification under the guidance
of project architect & Engineer in charge.
2 High Back Chair 1 22,170 22,170
Suppling & placing position of, leatherette high back chair in black color dimension(w)
720mm x (d) 560mm x (h) 1215mm seat depth 500mm seat width 560mm back height
730mm material & subtype premium leatherette upholstery material premium leatherette
filling material foam seat material premium leatherette finish matte color & color family
black color leatherette function revolving, adjustable height, tilt tension control, butterfly
mechanism. base - white pu casters, chromed gas lift - 350mm chromed. with its sculptural
yet multifunctional form, our collection offers the best of both work worlds. generously
padded silhouettes are wrapped in buttery soft leatherette, providing the performance of an
ergonomic chair. . The product should be as per above given specification under the
guidance of project architect & Engineer in charge.
Digitally signed by AMIT
3 Medium Back Chair 44 20,860 9,17,840
Suppling placing position of, leatherette medium, back chair in black color dimension(w)
720mm x (d) 560mm x (h) 1065mm seat depth 500mm, seat width 560mm, back height
560mm, material & subtype - premium leatherette, upholstery material -premium
leatherette filling material foam seat material premium leatherette finish matte color &
color family black color leatherette function revolving, adjustable height, tilt tension
control, butterfly mechanism. base - white pu casters, chromed gas lift - 320mm chromed.
with its sculptural yet multifunctional form, our collection offers the best of both work
worlds. generously padded silhouettes are wrapped in buttery soft leatherette, providing
the performance of an ergonomic chair, in a form that is as comfortable as it is beautiful.
The product should be as per above given specification under the guidance of project
architect & Engineer in charge.
TOTAL 17,54,424
Digitally signed by AMIT
S.No. UNIT QTY DSR RATE MARKET RATE MR AMOUNT
Supply of Ceiling microphone with automatic dynamic Beamforming technology, The beam will automatically detect the
position of the person speaking and will follow the person around the room at all times. It should have 2 x Dante digital
audio (Redundancy), Analog audio out (Phoenix 3-pin), and Ethernet for Control and PoE connectivity ports. The coverage
of the ceiling microphone should be min 800 square feet or more. It should have a true voice lift feature to increase audio
intelligibility above the ambient noise floor. It should support IT industry standards like IEEE 802.1x. It can be controlled
1 through software that can control and monitor the microphone in any network. It should have min 100 dB SPL, 5ms Nos. 2 590000 1180000
latency, and min 90dBA or higher dynamic range. High-precision audio settings for maximum control, setting to exclude
(min 5) and prioritize the areas of the room. It should certified from Microsoft Teams and Zoom Video conferencing
applications. It should have UL 62368 certification (including UL 2043 testing and compliance) and safety certifications.
Supply, Installation, Testing & Commissioning of Digital Signal Processor with 8-channel total analog I/O channels,
software configurable as analog Mic/Line Inputs with +48 VDC Phantom power or analog Line Outputs with Minimum 4x4
configuration. The processor shall have up to 8 assignable & routeable AEC channels and 8 General Purpose Inputs (GPI) x
8 General Purpose Outputs (GPO) ports. The processor shall have minimum 8x8 Dante channels and shall also support up
to 64x64 Network audio channels via Dante or AES67. It shall also support SIP Softphone integration for Audio
conferencing and 8x8 USB Audio channels via USB-B ports supporting AV USB Bridging for software or web based
2 conferencing applications. The processor shall also have minimum 24 bit-A/D-D/A converters, 48 kHz Sample rate, Input Nos. 1 413000 413000
frequency response of 20 Hz to 20 kHz @ +24dBu, Input dynamic range > 109.5 dB at @ +24 dBu sensitivity. The processor
shall support third party device control via Ethernet, RS232 and GPIO and shall have all mounting accessories included.
Third party device control can also be added as software of hardware to meet the requirement.
Supply, Installation, Testing & Commissioning of 2-way, Ceiling-mount loudspeaker. Rated Power - 30Watts, Sensitivity-89
dB SPL, Coverage Angle (-6 dB)-110° (500 Hz to 5 kHz), Maximum SPL Continuous/Peak-104dB/110dB, Rated Impedance -
8 Ohms. Transformer Tapping - 70V/100V(30, 15, 7.5watts). Transducer - LF - 6.5-inch Polypropylene cone with butyl
3 rubber surround, HF- .86-inch silk dome tweeter, coaxially mounted with LF, Material - Painted ABS polymer Baffle and Nos. 8 22420 179360
Power coated steel grille. Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.
Supply, Installation, Testing & Commissioning of Quad channel class-D Energy Star rated amplifier. Wattage per Channel -
100 watts/channel into Low-Z loads (8Ω/4Ω). Four channels shall also be bridged in pairs, each pair providing up to 200
watts rms into 4/8 ohms and up to 175 watts into 70V/100V. Signal to Noise (A weighted, 20 Hz-20 kHz)->100 dB,
Frequency Response-20Hz-20kHz, Input Sensitivity-1.23 Vrms (+4 dBu), Input Impedance->10 kΩ balanced/unbalanced,
4 Front Panel Indicators-Power, per channel Signal,Protect/Limit, Controls- 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Nos. 1 165200 165200
Highpass on per channel pair. Shall include all mounting accessories for mounting in half or 1 rack space.
Supply, Installation, Testing & Commissioning of 4K Network PTZ Conference camera with 20x optical zoom & 60-degree
horizontal coverage. Low Noise CMOS 4K image sensor with User-configurable resolution and quality for IP streams (up to
1080p). HDMI resolutions up to 4K30 and SDI-3G resolution up to 1080p60. Image rotation controls to allow for inverted
mounting using ceiling bracket. Minimum Illumination - 0.5 Lux @ (F1.8, AGC ON), Horizontal Rotation Range - ±170°,
Vertical Rotation Range - -30° to +90°, White Balance controls- Auto, indoor, outdoor, one-push, manual, specified color
temperature. Power – PoE & AUX. Wall mounting bracket included.with speaker tracking through programming.
Digitally signed by AMIT
S.No. UNIT QTY DSR RATE MARKET RATE MR AMOUNT
SITC of All-in-One (AIO) Active LED Display Fixed size 135" , Flip-chip COB (Chip on Board) LED TECHNOLOGY, Immersive
audio: 120-watt 6-speaker system, Built-in Android OS 13.0 with storage 8/64Gb, Pixel Pitch 1.5mm, Aspect Ration 16:9,
4K Enhanced Compatible, Resolution 1920 x 1080 Full HD, Brightness - 700 nits, Contrast Ratio - 15,000:1 , Refresh Rate -
3840Hz, CPU – Octa-Core (Four Cortex-A76+ four Cortex-A55), frequency 2.4GHz ; Inputs 3x HDMI 1.4, 1x HDMI 2.0 (4K
compatible), 1x USB Type C (Data: 5V, 1A), 2x USB 3.0, 1x Audio In (3.5mm), 1x RS232 (RJ45) ; Outputs 1x HDMI Out, 1x
9 Audio Out (3.5mm), 1x USB Out ; IP65 Enabled, Color Gamut: DCI-P3: 92.42%, Rec. 709: 99.36% ; Embedded Android Nos. 1 3304000 3304000
based controller, Wireless Screen Sharing, Wireless Content Sharing, Remote Display Management Software - Remote
Monitoring, Diagnose & Analyze, Control Scheduling, Multimedia Broadcasting ; Wet: 110Kg , LED Life: 100,000 hrs or
SITC of 55" 4k, UHD Professional Signege Display with 500 NITS, Built-in SOC/ Media Player with Quad Core
Processor, Built in Open Platform , Surface Haze 28%,With Built in Bluetooth, 3X HDMI 2.0, Audio Input Audio Output,
Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast, Dolby Digital audio, The built-in SOC is
11 powered by Google's Android OpenPlatform, 2 USB(2.0), 3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out, Nos. 2 82600 165200
Built In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB RAM & 16 GB Storage, 20 W built
speakers Complete with standard accessories as required
AvoverIP HDMI Decoder Supply, Installation, Testing & Commissioning of Network Video Endpoint configuraed as
Decoder. Outputs -1xHDMI with scaling or better. Local Inputs – 1xHDMI and 1xUSB-C for local switching. Audio
12 embedding and deembedding, Network Audio supported via Dante/AES67 or similar protocol. Video Resolution – 4K60 Nos. 3.00 295000 885000
4:4:4 or better. Power – PoE and AUX, Control Port – RS232 or better, Mounting hardware included.
AvoverIP HDMI Encoder Supply, Installation, Testing & Commissioning of Network Video Endpoint configured as Encoder.
Minimum Inputs – 1 x HDMI Input and 1 x USB-C for single cable connectivity for Video encoding, AV USB Bridging -
emulating webcam video and AEC speakerphone audio driver for Software based Video Conferencing and for charging the
13 connected device. Local - Output – 1x HDMI with Scaling , HDMI audio embedding and deembedding, Network Audio Nos. 3.00 295000 885000
supported via Dante/AES67 or similar protocol, Video Resolution – 4K60 4:4:4 or better. Power – PoE and AUX, Control
Port – RS232 or better, Mounting hardware included.
14 16 port POE network switch Nos. 1.00 70800 70800
15 Ipad with Wifi router Nos. 1.00 118000 118000
16 SITC of Cable cubby with HDMI, USB, LAN, Power Each 3.00 53100 159300
17 SITC cat 6 cables Mtr 500.00 118 59000
SITC of A set of HDMI, USB, Audio, Speaker, audio and ethernet cables and connectors
Supply & Installation of Cat 6 Modular Jack Panels for accommodating 24 port termination and shall facilitate cross-
connection and inter-connection using modular patch cords and shall conform to EIA standard, 19-inch relay rack
mounting requirements. Patch Panel shall come with preloaded information outlets .Panel shall have label holders and
21 designation labels as part of the standard device. Shall also come with rear cable management metallic tray with velcro Each 2.00 9440 18880
ties complete as required and as per technical specifications.
Supply, Installation, Testing & Commissioning of 22 U floor mount rack with fans , 2 cable managers , satationary shelf , 2
22 Nos. of hardware pkts. Nos. 1.00 53100 53100
Digitally signed by AMIT
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT MoMA meeting room.pdf
Tender Document
Boq MoMA meeting room.pdf
Tender Document
SCC MoMA meeting room.pdf
Tender Document
GCC PMC 2022 Amendment 16.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Forms.pdf
Tender Document
List of Make.pdf
Tender Document
Download all tender documents and submit your bid