8465/E8 SPL REPAIR TO OTM ACCN BLDG NO T-02 OF STN HQ SHAHJAHANPUR AND SPL REPAIR TO OTM BLDG NO T-7 OF 167 INF BDE CAMP AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) / galvalume sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer incl surface preparation over 10 cm width and girth complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L for 2mm thick wall care cement base white JK/Birla/Asian wall putty on wall/ceiling all as specified and directed

S & F 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre size 600 mm x 600mm for fixing in aluminium snap grid frame work of grid size 605 x 605mm as in false ceiling complete all as specified and directed. The main and cross tees (15mm x15mm x1.5mm thick, weighing @ 0.12 Kg/Rm) shall be jointed at junction/crossings with anodized aluminium angle brackets. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 40mm x 25mm x 2mm thick, weighing @ 0.36 Kg/Rm. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 4mm dia G.I. wire (upto 1200 mm in length) adjusting levels fixed to truss/purlin by ceiling cleats made of G.I. flat 40 x 3 mm size 60 mm long or J bolts with necessary bolts, nuts and washer complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles as specified and directed

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for granite (colour as approved) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing types over 20mm thick screed bed in CM 1:6 complete all as specified and as directed..

M & L for glazed ceramic coloured tiles in vertical surface 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white/coloured cement including 10 mm thick cement plaster in CM 1:4 complete all as specified and as directed.

S & F solid PVC lining consisting of 5 mm thick woodgrain printed PVC sheet inclusive of solvent cement and fixing at site inclusive of fixing on to wall to make PVC frame as per specified.

Hacking out old broken glass of (any thick, size, quality or description) from old wooden/steel frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3/4/5 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4.8mm thick sheet glass frosted sheet glass and glazing with oil putty/ beading n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S & F rates, include for anodised aluminium hard ware as indicated, screws, pvc rawl plug, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames.

S & F of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkhats or frames n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M& L for two coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M & L for finishing walls with acrylic Smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for filling of gap between ridge and galvalume sheet with PUF 25 mm thick complete all as specified and directed

M&L for light shade coloured polished glazed vitrified ceramic tiles 10 mm thick (rectangular) polished area of each tile exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L roof trusses(framed), trussed, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A and also dismantling etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) type B-1 (using 20 mm graded stone agregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M & L for RCC M-25 (Design Mix) type B-1 (using 20 mm graded stone agregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) type B-1 (using 20 mm graded stone agregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick of rough surfaces of concrete.

M & L for precast cement concrete 1:2:4 type B-1 (using 20 mm graged aggregate) as block masonry with solid blocks, exc. 10cm in width and setting in CM 1:4, complete

Use & waste formwork to sides of concrete foundations and raft beams, sides and soffits of foundation and plinth beams; and similar work of rough surfaces of concrete.

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough surfaces of concrete.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete

M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete

M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and as directed.

M & L for 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for machine pressed cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors and polished complete all as specified and directed.

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

S&F in repair curtain rod stainless steel grade 304 25 mm dia including fancy finials, bracket & end holder for each rod including pvc rawl plug & SS screws complete all as specified & directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door chowkhat of size 45x70mm with density of 750 kg/cum, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position complete as per direction.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), min comp str 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge as per specification & drawing complete all as specifed and directed.

S & F factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engr-in-Charge. (Glass or wiremesh shall be paid separately)

S & F of 200 mm long stainless steel grade 302 barrel barrel tower bolts and fixed as specified and as directed.

S&F 100 mm long butt hinges, 3.00 mm thick (minimum) stainless steel grade 304 with SS hinge pin and fixed complete all as specified and directed.

S&F 300mm long stainless steel grade 304 sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed.

S&F 18/19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S & F of factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 0.90 mm thick decorative laminates on one side and 0.50 mm thick laminates balancing white colour complete.

S & F of 25 mm thick veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work complete all as specified and as directed.

S & F of 0.60 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S & F of 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S & F of Stainless steel handles grade 304 decorative type 150 mm long for cup boards complete all as specified and as directed.

S & F of mild steel stove enamelled heavy duty sliding guide channels 150 mm long complete for cup boards complete all as specified and as directed.

S & F of stainless steel grade 304 soft closing hinges (90˚) complete fixed with screws complete all as specified and as directed..

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed

Taking down carefully old unserviceable fittings & Fixers of any type and any size complete all as specified and as directed..

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity complete all as specified and as directed. .

Taking down carefully old unserviceable sub main wiring of any size complete all as specified and as directed. .

(a). One light point controlled by one switch

(b). One fan point controlled by one switch

(c). One exhaust fan point controlled by one switch

(d). One 3-pin socket outlet 5 Amp on independent board.

(e). One 3 pin socket outlet 5 Amp on same board

(f). One bell point controlled by one switch

All per Srl item No. 63 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S &F Modular switch polycarbonate SP one way 6 Amps complete all as specified and directed

S &F modular switch polycarbonate SP one way 16 Amps complete all as specified .

S&F modular bell push 6 amp single pole one way complete.

S&F modular socket out let 3 pin 6 amp multipurpose flash type.

S&F modular socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S&F bell ding dong type AC 230 volt single pole Complete.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

Supply and fixing LED bulb 12 watt rechargable include connection all as specified. Make: C &S

M & L for replacement of Step regulator electronic modular socket type fan regulator flush type on the existing phenolic laminated sheet etc as required complete & all as specified.

Taking down fan of any size and deposited to E/M storeyard for , complete all as specified

Supply & fix 1200mm Glaze BLDC ceiling fan (white) complete with remote control and electronic type regulator and accessories 230 V,1200 mm sweep. 5 star rated all as per specified and as directed by Engr -In-Charge

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

S&F box type LED light fitting suitable for 4 ft 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Taking down old unsv bldg security light fitting, Supply and fixing new LED bldg security light fitting 45 watts with senser to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion.

Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housing and top frame with opal PMMA diffuser.

S & F in replacement mirror LED light fitting 2 feet 10 watt with accessories complete all as specified and directed.

S&F in replacement of wall mounted fan 400mm sweep with cupper winding fitted on cabin/wall complete all as specified & directed with Engr-in-charge.

Supply and fix in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with hefficiency PMMA diffuser soft glare free light completewith driver,with warm white suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete

Taking down safel of decorative light with accessories and refixing of the light without damage of light complete all as specified & directed with Engr-in-charge.(Note- If damage of light contractor will own arrange the light and fixing at same place.)

S& F electric kitchen chimeny heat auto clean with motion senser auto off function ,touch sencer control LED lighting ,metal housing brushless DC motor ,auto dean alarm,mood light ,material tempered glass ,noise level not less than 70db of size 90 cm and suction power 1250m3/hr with suitable size of flexible aluminium pipe for chemeny exhaust (up to 20 feet4/6 inch) including all fixing arrangement complete 6 way ,autoclean alarm mood lt Make-Faber/Inalsa/Glean

Supply,installation,commissioning and testing of instant electric water heater (gyser) of capacity 5 ltr/l ltr (or nearest higher strander size) vertical storage ABS plastic outer body of 5 star rating avalible in market by company),inner tank made of stainless steel inner tank of 304 grade with anti corrosion 3 KW ,pressure rating ,heating element of anodized rod with safety valve ,thermostate,NRV connection pieces,necessary gate valve of suitable size incl all fittings arrangement complete all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB 100 Amps 25 KA 4 pole all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 50 sqmm 3.5 core complete all as specified .

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 35 sqmm 3.5 core complete all as specified .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge.

M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB 100 Amps 25 KA 4 pole all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 50 sqmm 3.5 core complete all as specified .

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 35 sqmm 3.5 core complete all as specified .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge.

M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

m/s udit constructions (BID ID -3490039)

M/S CHAUHAN ELECTRIC WORKS (BID ID -3487187)

Shikhar ji Enterprises (BID ID -3490605)

M/S MANSI TRADERS (BID ID -3488935)

M/S SHAHABUDDIN AND SONS (BID ID -3484936)

M/S WASEEM KHAN CONTRACTOR (BID ID -3489956)

SHRI UMESH TALWAR (BID ID -3483835)