Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAdmitted-Finance COURT ROAD UTTARKASHI | ₹2.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.9 Cr+₹3.1 L (1.08%)Admitted-Finance 112 RADHEY SHYAM VIHAR PHASE II MURAD NAGAR GHAZIABAD UP | GHAZIABAD | UP | ₹2.9 Cr+₹3.1 L (1.08%) | L2 | Admitted-Finance |
| 3 | L3₹2.9 Cr+₹3.2 L (1.12%)Admitted-Finance 2 FRIENDS ENCLAVE SHAH NAGAR DEHRADUN | ₹2.9 Cr+₹3.2 L (1.12%) | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical VILL UPPER NATHANPUR PO NEHRUGRAM NR AMBIWALA GURUDWARA DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | - | - | Not Admitted-Fee/PreQual/Technical Others-The bidder does not sumbitted Hard Copy. |
| 5 | Not Admitted-Fee/PreQual/Technical 44 1 3 VILL RITHANI DELHI ROAD WEST RITHANI MEERUT UTTAR PRADESH 250103 | MEERUT | UTTAR PRADESH | 250103 | - | - | Not Admitted-Fee/PreQual/Technical Others-The above bidders not submitted Hard Copy tender documents |
| Sl No | Description | Qty | Unit | RP INFRAPOWER PVT LTD L2 | SHIV ELECTRICALS L1 | UTTARANCHAL FORGINGS INDUSTRY L3 |
|---|---|---|---|---|---|---|
| 1.00MATERIAL | ||||||
| 1.01 | ST Pole 11 mtr long SP-55 (Bottom portion hot dip Galavanized) | 227 | Nos. | 56,70,460 ₹56,70,460 | 63,56,000 ₹63,56,000 | 56,52,300 ₹56,52,300 Lowest |
| 1.02 | ST Pole 13 mtr long SP-72 (Bottom portion hot dip Galavanized) | 8 | Nos. | 2,92,000 ₹2,92,000 | 3,03,320 ₹3,03,320 | 2,88,000 ₹2,88,000 Lowest |
| 1.03 | ST Pole 8.5 mtr long SP-23 (Bottom portion hot dip Galavanized) | 65 | Nos. | 11,63,500 ₹11,63,500 | 11,77,800 ₹11,77,800 | 11,50,500 ₹11,50,500 Lowest |
| 1.04 | ST Pole 8.5 mtr long SP-23 (Bottom portion hot dip Galavanized) for Stud | 10 | Nos. | 1,79,000 ₹1,79,000 | 1,81,200 ₹1,81,200 | 1,77,000 ₹1,77,000 Lowest |
| 1.05 | MS Angle 65x65x6 mm | 4,560 | Kg | 2,87,280 ₹2,87,280 | 3,64,800 ₹3,64,800 | 2,73,600 ₹2,73,600 Lowest |
| 1.06 | MS Angle 75x75x8 mm. | 2,409 | Kg | 1,51,767 ₹1,51,767 | 1,92,720 ₹1,92,720 | 1,44,540 ₹1,44,540 Lowest |
| 1.07 | MS Channel 100X50 mm | 7,500 | Kg | 4,65,000 ₹4,65,000 | 6,00,000 ₹6,00,000 | 4,50,000 ₹4,50,000 Lowest |
| 1.08 | MS Channel 125 x 65 mm | 2,100 | Kg | 1,30,200 ₹1,30,200 | 1,68,000 ₹1,68,000 | 1,26,000 ₹1,26,000 Lowest |
| 1.09 | LT PRMC (400/5) | 5 | Nos. | 58,000 ₹58,000 | 55,500 ₹55,500 Lowest | 57,500 ₹57,500 |
Tender Value
₹2.1 Cr
EMD Value
₹4.3 L
Closing Date
5 May 2022, 1:00 pmClosed
Superintending Engineer, EDC (Urban),Dehradun
Office of the Superintending Engineer, EDC (Urban),Dehradun
Shifting of HT/LT overhead line from Kargi Chawk to Mathorowala T-Point due to road widening on turnkey basis
2022_UPCL4_43194_1
tenderno.02/edc(u)/2022-23
Open Tender
Electrical Works
Item Wise
120 days
as per tender specification
As per tender specification
5 documents required · 5 mandatory
₹11,800
Superintending Engineer, EDC (Urban),Dehradun
₹4.3 L
11 May 2022
12 Apr 2022
5 May 2022
14 Apr 2022
5 May 2022
15 Apr 2022
MATERIAL
ST Pole 11 mtr long SP-55 (Bottom portion hot dip Galavanized)
ST Pole 13 mtr long SP-72 (Bottom portion hot dip Galavanized)
ST Pole 8.5 mtr long SP-23 (Bottom portion hot dip Galavanized)
ST Pole 8.5 mtr long SP-23 (Bottom portion hot dip Galavanized) for Stud
MS Angle 65x65x6 mm
MS Angle 75x75x8 mm.
MS Channel 100X50 mm
MS Channel 125 x 65 mm
LT PRMC (400/5)
LT PRMC (200/5)
11 KV Disc Insulator Polymer type
11 kv G/O Switch
11 KV Pin insulator with pin Polymer type
11 KV XLPE AL Cable 3x240 sq mm
33 KV Disc Insulator Polymer Type
33 KV Disc fitting B&S type 90 kn panther
33 KV Pin insulator with pin (polymer)
9 KV 10 KA L/A
ACSR Dog conductor ( 3100x3 + 3% Sag +73 M EXTRA)
ACSR Painther conductor ( 3100X3 + 3% sag + 296 extra)
Cable 1x120 SQ MM XLPE
Cable 1x240 SQ MM XLPE
Cable 1x400 SQ MM XLPE
Disc fitting for Dog / Racoon
Earthing rod 20x2500mm
Earthwire 7/16 SWG ( 1000 m @ 110 Kg./Km. + 3% C&W)
GI wire 6 SWG
GI wire no. 8 SWG
LT XLPE AB Cable 3x120+ 1x95+1x16 SQ MM
LT XLPE AB Cable 3x95+ 1x70 SQ MM
LT XLPE AB Cable 3Cx25+25 SQ MM
LT XLPE AB Cable 1x16+25 SQ MM ( street light)
Stay set 16x1800 mm
Stay wire 7/8 swg
Stay set 20x1800 mm
De-Centralized Material
Al. Crimping lugs 240 sq.mm
Al. Crimping lugs 120 sq.mm
Al. Crimping lugs 400 sq.mm
11 KV Cable Termination kit 240 sq mm O/D type
200 mm Dia GI Pipe
Barbed Wire
Bracing clamp (made of MS flat 65x6 mm) with nut & bolt
Cable 1x16 SQ MM
Danger Board with clamps, nut & bolt
Dead End Clamp WNB
Distribution Box 3 phase With Holding Clamp WNB & fixing
E clamp ( made of MS Angle 65x6 mm.) with nut & bolt
E clamp for 33 KV pin insulator
Earth wire clamp (made of MS flat 50x6 mm) with nut & bolt
Earth wire clamp (made of MS flat 65x6 mm) with nut & bolt
F clamp (made of MS flat 65x6 mm) for 11 KV pin insulator
GI Earthing Strip 50X6 mm
GI Nut & Bolts 3/4 " x25 mm
Half cut hume pipe for Cable Laying 6''
LT Clamp (made of MS flat 50x6 mm) for SP-23 with nut and bolt
LT Shakle insulator (100x115 mm) with nut and bolt
PG Clamp for panther to panther Conductor
PG clamps for dog Conductor
Pierecing Concetor 120/95
Pierecing Concetor 95/25
Pipe holding clamp ( Made of 65x6 mm flat) for supporting 6" GI Pipe
PP & clamp (made of MS flat 50x6 mm) with nut & bolt for ST POLE SP-72
PP & clamp (made of MS flat 50x6 mm) with nut & bolt for ST POLE SP-55
PP & clamp (made of MS flat 65x6 mm) with nut & bolt for ST SP-23
Route marking pillar of concrete engraved with nomenclature "UPCL HT Cable"
Stay clamp( made of MS flat 65x6) with nut & bolt SP-55
Stay insulator for 33 KV/11 KV with all fitting
Suspension Clamp WNb
Stud Clamp for SP- 55, SP-72 through SP-23
LABOUR CHARGES
Cartage of ST pole and PCC Poles from store centre to construction site with loading, unloading at both points
Other stock material
Head Load Cartage
Other stock material
Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole
Erection of following Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual.
Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories
ST Pole SP-55
Erection of following Four pole support in proper level and alignment alongwith fixing of all accessories.
Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal
Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand
Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO sehedule and local approved drawing.
Fixing of D-type bracket in LT line
Fixing of Extension bracket in 11 KV line
Fixing of Extension bracket in 33 KV line
Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing
Fixing , tightening and nozzaling of Stay with pole and stay rod
11 KV line
33 KV line
Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8
Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod 48 pole earthing + 38 L/A & Boby Earthing Of TF
Laying, Spreading, Stringing and sagging following conductor (3 ph 4 wire including earthwire as the extra wire)
Dog CONDUCTOR ( for 33 kV)
Dog CONDUCTOR ( for 11 kV)
Guarding of Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual. L.T./11KV /33KV
LT/11KV Line.
33KV Line.
Mounting & Fixing of TPMO on double pole structures including making of connections complete work
Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work
Mounting and Fixing of Lightning arrestor set (3 Nos.) on double pole
Painting of poles with angle and channel and all steel part
ST Pole SP-23
ST Pole SP-55
ST Pole SP-72
Dismantling of TPMO /fuse set on double pole structure.
Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Single Pole
Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Double Pole
Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Four Pole
Dismantling of 11 KV Line WITH DOG CONDUCTOR
Dismantling of 33 KV Line WITH Panther CONDUCTOR
Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc.
Installation / mounting of new Tranformer on plinth pole structure On Double Pole
Providing and fixing of Danger Board and number plate
Dismentling of AB cable
laying of AB cable
Relaying of above dismentteled AB cable
Laying of 1x16+25 sq mm cable for street light
DISMENTLING OF L.T. PVC CABLE 1X120CMM2
DISMENTLING OF L.T. PVC CABLE 1X240CMM2
Dismantelling and remounting of metring cubical after completion of erection work
Dismentling and Remounting of sectionlizer
Back carriage of following
CODUCTOR SCRAP
Merialble Scrap
Channel/Angle/Conductor Scrap
Laying and erection of L.T. PVC single lead Cable including crimping of lugs of size 1x120/240
Making of section pole for existing LT/HT/33KV line complete in all respect.
Complete work of Laying, Stringing and sagging of earthwire
Making of Special type of GI Plate eathing with Transformer/Panel with lap welding including bending or other required work etc. GI strip shall be laid down upto the neutral & T/F body seperately in one piece. Test result of earthing shall be provide by contarctor. Acceptable results shall be within 3 ohm.
Erection providing and fixing of wire mesh of size 50x35 mm around the double pole with frame of ms angle , aluminium paint two coat inculding cost of all material complete work
Laying of 11 KV Cable on ST pole by fixing of GI pipe using cable support channel, clamps etc.
Route Marking of underground HT cable by grouting of concrete piller engraved with nomenclature "UPCL HT Cable" at every 100 mtr
Filling of cable jointing kit 11KV outdoor type
Making connection of Cable Termination End with Line
Making of T/F Base
Fixing of Distribution Box
Dismentaling of connection of Street Light
Disconnection & Reconnetion of Service cable
RP INFRAPOWER PVT LTD
UTTARANCHAL FORGINGS INDUSTRY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.09 MB
TenderDocument022022.pdf
Tender Documents • 1.27 MB
PQR022022.xls
Tender Documents • 0.03 MB
TECHNICALPoleandConductor1.pdf
Tender Documents • 0.51 MB
TECHNICALSPECIFICATION2.pdf
Tender Documents • 0.39 MB
TechnicalspecififLighteningArrestor3.pdf
Tender Documents • 0.17 MB
LTCableSpecs4.pdf
Tender Documents • 0.86 MB
BOQ_51353.xls
BOQ • 0.43 MB
TenderCoverpage022022.pdf
Tender Documents • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .