Construction of Various physical facility works in the school In Ta-Garudeswar district -Narmada

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 36.94 Cmt. 125.86

Meter lead.(A)Loose or soft soil

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand :8 hand

2 brocken stone aggregates of 40mm nominal size) in plinth and curing complete 8.58 Cmt. 2738.11

including cost of formwork. (A) Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand

3 broken stone aggregates 40 mm nominal size) and curing complete including cost of 4.72 Cmt. 2575.34

formwork in (A) Foundation and Plinth

Brick work using common burnt clay building conventional bricks having crushing

4 strength not less than 35 kg / sq. cm. in foundation and plinth in cement mortar 1:6. 26.76 Cmt. 4279.98

etc. complete S.O.R 06002BA item no. 6.13 Page-89

Brick work using common burnt clay building bricks having crushing strength not less

5 than 35Kg./Sq.Cm. for superstructure in cement mortar 1:6(1 cement :6 fine sand) 39.55 Cmt. 4568.40

including curing etc. complete. (C) Fly Ash Bricks For all heights and all floor

Filling with the available excavated earth (excluding rock) in trenches, plinth, sides of

6 foundation etc. in layers not exceeding 20cm in depth consolidating each deposited 28.80 Cmt. 137.47

layer by ramming and watering.

foundations etc. In layers not exceeding 20Cm. In depth consolidating each

deposited layer by ramming and Watering etc. complete

Item no- 04008A 0.00 P-70

Half brick in common brunt clay building bricks having crushing strength not less

8 than 35 Kg/sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) (C) Fly Ash 16.14 Smt 696.50

Bricks in super structure including curing etc. complete.For all floors

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded

stone aggregate 20 mm nominal size) & curing complete including cost of form work

(A) Foundation and Plinth -Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

10 graded stone aggregate 20mm nominal size) laid in one layer and finished with a 44.92 Smt 304.39

floating coat of neat cement. (A) 40mm thick.

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of reinforcement for reinforced

concrete work in (C) Coping Vertical and horizontal for all floor (Cement Level

Providing & laying ordinary cement concrete M200 (1:1.5:3) (1 cement : 1.5 coarse

sand : 3 graded stone aggregates 20mm nominal size) for RCC lintel including

finishing smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for RCC work.(As per R.A.)

Providing & laying ordinary cement concrete (1:1.5:3) (M-200) (1 Cement :

Coarse sand : 3 graded stone aggregates) for reinforced concrete chhajjas not

exceeding 10 cm thickness up to floor two level including finishing the exposed

surfaces with curing etc completed. (As per R.A.)

Providing and laying controlled cement concrete M.200 and curing complete

14 including the cost of formwork and excluding the cost of reinforcement for reinforced 4.72 Cmt. 6845.21

concrete work in (C) Slab all floor (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark) Confirmed to IS-

15 1786 for R.C.C.work including Cutting, bending, binding and placing in position etc. 879.96 Kg. 77.29

complete.For all floors

Providing 10mm thick cement plaster in single coat on on brick/concrete walls &

16 Ceilling & Soffit of stair interior plastering in cement mortar 1:4(1 cement 4 sand) 182.25 Smt 162.12

watering, curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair side of single or

17 half brick wall for interior plastering in cement mortar 1:4(1 cement 4 sand) watering, 321.13 Smt 206.23

curing etc. complete.For all floors

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

18 to give an required shape even shade after thoroughly brushing the surface to 300.51 Smt 122.14

remove all dirt, and remains of loose powdered materials.etc complete.

Distempeing (Two coats) with oil bound washable distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even shade, over

and including a priming coat with alkali resistance primer of approved brand after

thoroughly brushing the

surface and other foreign matter and also including.

preparing the surface even and sand parpered smooth

ITEM R & B SOR

DESCRIPTION OF ITEM QTY Per Unit Estimated Amount

Painting two coats (excluding priming coat) on new steel and other metal surfaces

with enamel paint, brushing, interior to given an even shade including cleaning the

surface of all dirt, dust and other foreign matter etc. complete

Item no-(2) 19.7 Pg.

Providing cement vata (10 cm X 10 cm size) quartar round in cement mortar 1:1

21 including neat cement finishing, watering etc. complete Respectely plaster acitivity 47.68 Rmt 24.28

shall be commenced only after completion of vata work.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges

& fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

Providing & fixing in position M.S. Angle 40mm × 40mm × 6mm angle frame for door

and 35mm × 35mm × 5mm angle frame for shutters, 18 gauge iron sheet on

shutters with 4 nos. Of hold fasts for door as per the coat of red lead paint and all

necessary fitting etc. complete (item no 25) 10.100 Pg.47

Providing & fixing in position M.S. Angle 35mm × 35mm × 6mm frame for windows &

ventilations with safety grill of M.S. 10mm Square bars welded to frame at 10cms

24 shutter frame and 18 Gauge M.S. sheet welded to shutter frame as per the approved 277.10 Kg. 103.08

drawing & design etc. complete.

(item no 25) 10.100 Pg.47

25 Providing & fixing G.I rain water Spout of 65mm dia and 60cm length. 4.00 NO 717.46

25mm thick Kotah stone flooring over 20mm (average) thick base of cement mortar

1:6 (1 cement 6 coarse sand) or lime mortar 1:1.5 (1 lime 1.5 coarse sand) laid

26 over and jointed with grey cement slurry including curing, rubbing, and polishing etc. 25.26 Smt 1019.39

(Item no 14012AA (14.43) Pg.136

Providing fixing 25mm thick polished kota stone for cub board shelves and seating

27 plat form in including curing, rubbing polishing etc complete 5.11 Smt 815.58

(As per R.A.)

Providing and laying white glazed tiles 6mm thick in flooring treads of steps

28 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 26.24 Smt 964.48

coarse sand ) finishing with flush pointing in white cement.

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete.(E) 100mm thick

Construction of a soak well of as per the approved drawing & design etc.in all sort of

30 soil complete as directed and approved by engineer incharge.( The internal In-to-in 5.42 Per Cmt 6002.65

dimension shall be considered for calculation)

Construction of a soak pit of 1m x 1m and depth 2m including excavation and filling

31 brick bats with dry brick masonary as per the approved drawing & design etc. 1.00 NO. 1394.14

complete.iteam no;24018A(0) pg no;158

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg/Cm2 in

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix

33 (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 3.00 NO 3175.32

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Providing erecting and fixing double coated ISI water tank of required capacity

34 each with all necessary fittings and connection etc. complete on terrace 4500.00 liter 3.95

35 Providing & fixing UPVC ball valve(A) 25mm dia. 3.00 NO 522.68

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x

100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

ITEM R & B SOR

DESCRIPTION OF ITEM QTY Per Unit Estimated Amount

Providing & fixing aluminium 15cms X 15cms gratings for Nanhi Trap etc. complete.

38 ( As per M.R. ) 5.00 NO 70.70

Providing and fixing Gun metal check or non-return fullway wheel

valve.(A) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(A) 15mm dia.

Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

41 help of clamp at every two metre C/C or shall be concealed as 51.00 Rmt 91.84

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

42 help of clamp at every two metre C/C or shall be concealed as 23.70 Rmt 72.65

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure PVC pipes

of the following out side dia. Special density complete with special flange

compression type fitting,wall clips etc. including making good the wall ceiling and

floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure PVC pipes

of the following out side dia. Special density complete with special flange

compression type fitting,wall clips etc. including making good the wall ceiling and

floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working PVC pipes of the

following out side dia. Special density complete with special flange compression type

fitting,wall clips etc. including making good the wall ceiling and floor.(F) 75 mm dia

Providing & fixing 75mm dia C.I. cowl vent to pipes.

(Item no.7(0.0) Page no.

Providing Plinth Protection to MDM building including excavation and laying cement

concrete (1:5:10) using Stone aggregates of 20 mm nominal size in foundation Layer

and above providing cement concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone

47 Aggregrate 20 mm nominal size) of coping on top including steel & Broom finishing 33.75 Smt. 3161.77

(plaster 15 mm) with Square line(0.20 X 0.20) marking on Top curing etc complete

(Only top area should be measured.)

(As per R.A.)

Painting S.S.A. logo on front side wall as directed by engineer incharge and as per

48 approved drawing etc. complete 2.00 No. 707.00

(As per R.A.)

Drilling of bore hole an Alluvial strata by Direct Rotary Ring size

200mm/250mm dia.

E.R.W. plain and medium duty pipe confirming to IS 1239 / 1964 with

50 latest amendment in random length of 4 to 7mtr size 200mm dia (minimum 40.00 Rmt. 1714.09

5.82 mm thickness)

Providing and laying E.R.W Plain end medium duty pipe cage

typeTrapezoidal shape ('V') wire wound low carbon, Galvanized screen pipe

confirming IS: 8110, 4 to 7 mtr. Size 200mm dia (D)

mm dia HEAVY,1) 1.00mm Slot size

Providing and supplying ISI make G.I pipe with coupling of following class "B"

including all taxes, insurance, transportation,freigth charge,octroi,inspection

charge,loading,unloading,covenyance to

deppt. Storess stacking etc.completed 65mm dia. IS 1239/1990.

53 Supply of gravel having size 4mm to 6mm as directed on site. 5.50 cu.m 1932.07

Supplying submersible pump set for bore of 150 mm. dia. or more having

phase motor capacity not more than 15 H.P discharge capacity having

54 (a) (10 Stage) 600 to 500 L.P.M. discharge at the head 70 to 85 mtrs. suitable for 1.00 No. 38885.00

65/5 mm dia. delivery pipe

ITEM R & B SOR

DESCRIPTION OF ITEM QTY Per Unit Estimated Amount

Supplying & erecting approved make motor control cubical panel [Star delta] made

from 16G CRCA sheet duly epoxy powder painted inside and outside with hinged

doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro controller based control

unit and current sensing single phasing preventer electronic overload protection,

over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all

parameter like overload current, high voltage limit, low voltage limit, dry run limit

with digital indication on seven segment LED display for any fault like over load,

high voltage, low voltage, dry running single crimped, electronic star delta

timer, feather touch start / stop push buttons to be erected on angle iron frame.

Grouted on wall the contactors will be of L& T, Siemens , BCH make only) (d) S/D

Providing and erecting PVC insulated round submersible cable as per detailed

technical specifications of R/C of GWSSB conforming to IS 694, IEC, 60227 /

Supplying and erecting ISI approved make power capacitor for 440 V 50 c/s per

57 KVRA complete to be erected on angle iron flange. (A) 5.00 No. 700.61

Metalised polypropylene dry type ( upto 25 KVAR) heavy duty.

Providing approved make Triple Pole Metal Clad Switch & Fuse unit 415/500 V with

58 HRC fuse of suitable load with neutral link confirming 1.00 No. 3925.45

to IS (b) 63 A Cat III

Supplying and erecting ISI marked sluice valve at position with necessary

material for following size of pipe diameter. (E ) 65mm dia.

Supplying & erecting Mild Steel heavy duty Flanges with rubber

packing and hardware materials for pipe connections suitable for (D) 200 mm

Supplying & erecting G.I. bend for pipe connection suitable for (g)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

62 Metallic/Wooden box, single mounting base frame covered with 6.00 Pt. 350.47

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

63 Luminaire efficacy> 85 lumens/watt ,LED 9.00 Each 295.93

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

wattage capacity between the ranges shown.) (A) Tube Light with integral driver (c)

18-20 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

I / WE am / are willing to carry out the work at ________ % above / below (percentage should be

Estimated amount put to tender Rs.

Deduct / Add: _____ % below / above Rs.

Net Amount of Part - A Rs.

in words _____________________________________________________________

(Please strike out which ever is not applicable)