REPAIR/ REPLACEMENT OF INTERNAL ELETRIFICATION ALL FITTINGS AND ALLIED WORKS SECT I TO IV AT AGE CHARDUAR UNDER GE(N) TEZPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through PVC casing & caping minimum size 20 mm including accessories, fixed on surfaces of wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes 1.6 mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium screws for housing the switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down old point wiring all as specified and directed by Engr-in-Charge. (a) One light point controlled by one switch

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through PVC casing & caping minimum size 20 mm including accessories, fixed on surfaces of wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes 1.6 mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium screws for housing the switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down old point wiring all as specified and directed by Engr-in-Charge. (a) One fan point controlled by one switch

All as per item 2.0 above but for One 3 pin socket outlet 5 Amps on same board complete all as specified and as directed.

All as per item 2.0 above but for One 3 pin socket outlet 5 Amps on indpendent board complete all as specified and as directed.

All as per item 2.0 above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

All as per item 2.0 above but for One bell/buzzer point controlled by one bell push complete all as specified and as directed.

All as per item 2.0 above but for One socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size (two run) & 1.5sqmm (one run) complete all as specified and as directed.

S & F switch piano 5/6A one way ,240 volt , AC , 50 Hz flush type complete all as specified and directed.

S & F switch, 6 A, single pole, two way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.

S&F socket outlet 2 in 1, 3pin 5 amps 230 volts complete all as specified and directed by Engr-in Charge

S&F switch piano flush type 15 amps single pole one way complete all as specified and directed by Engr-in Charge

S&F socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed by Engr-in Charge

Supply and fix bell push flush type 5 Amps complete all as specified and directed.

S&F call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge

S&F Electronic fan regulator dimmer type,450w , 250 volt complete all as specified and directed by Engr-in Charge

Re- fixing for Ceiling Fan after cleaning including taking down carefully of any size/any type after disconnecting the electric connection and re-connecting the fans to ceiling rose/connector after necessary servicing complete all as specified and as directed.

S & F Bayonet plastic lamp holder, 2 A, 250 V, ordinary, backplate, non-switched, unenclosed, without T marking, B22d complete all as specified and as directed.

S&F of LED bulb 9 w high sutable for lamp holder complete all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro

Supply and fix 20Watts LED light fitting, basic all purpose surface and wall mounted LED batten 20Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No. all as per Cat No.LTTB4F20WLED/W of C&S or equivalent of other specified makes fixed on surfaces of wall or ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro

Supply and fix 10Watts LED light fitting, basic all purpose surface and wall mounted LED batten 10 Watts with aluminium housing and integrated electronic driver including 10W LED tube - 1No. all as per Cat No.LTTB2F10WLED/W of C&S or equivalent of other specified makes fixed on surfaces of wall or ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro/Surya

Supply and fix 45 Watts Environment friendly, new generation, aesthatically, ultra modern designed Recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong/Grid ceiling all as per Cat LTCRSLM45WATT2X2 of C &S or equivalent of other specified makes fixed to ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. Make : HAVELLS CG/Philips /Wipro

Supply and fix 10 Watts environmental friendly, ultra moders, energy saving, surface mounted , decorative oval bulk head edge-lit LED luminaire comprising of high brighthess LEDs all as per Cat No SIRIUS/10W of C&S or equivalent of other specified makes all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro

Taking down old damaged/broken sub main wiring of any size/capacity alongwith existing conduit pipe/casing and caping and removing the same from the site and making good the disturbed portion of the wall etc all as specified and directed by Engr-in-Charge.

S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling etc with one run of 2.5 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable + one run of earth wire and one run of conduit including accessories shall be measured as one length.

M & L for sub main wiring with two single core FRLSH, PVC insulated unsheathed , 1100 Volts grade, copper cable 6 sqmm stranded conductor and drawing through PVC conduit (MMS ISI marked) of suitable size with accessories including continus earth wire FRLSH,PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring and making good disturbed surface matching with the existing shade/tint. Note :-(i) One run of conduit, two runs of cable and one run of earth wire shall be measured and paid as one unit. Make of cable: Polycab/Finolex/Havells/KEI Make of Conduit :- Presto plast/ Richa

S&F sub main wiring complete with two runs of 10 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe surface in wall alongwith accessories fixed on walls/floors/ceiling etc with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note :- two runs of PVC insulated cable with one run earth continuity conductor and one run of PVC conduit with conduit accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one complete all as specified and as directed.

All as per item 29 above but for DBs SPN 4 way,with 200 amp rated bus bar Double door complete all as specified and directed by Engr-in-Charge.

All as per item 29 above but for DBs TPN 8 way,415V with 200 amp rated bus bar Double door complete all as specified and directed by Engr-in-Charge.

All as per item 29 above but for DBs TPN 6 way,415V with 200 amp rated bus bar Double door complete all as specified and directed by Engr-in-Charge.

All as per item 29 above but for DBs TPN 4 way,415V with 200 amp rated bus bar Double door complete all as specified and directed by Engr-in-Charge.

S&F isolator MCB of rating 415 Volts,TPN 100 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB of rating 415 Volts,TPN 63 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB of rating 415 Volts,TPN 40 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB of rating 240 Volts,SPN 63 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB of rating 240 Volts,SPN 40 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB of Single pole of rating 6 to 32 Amps including taking down the old one complete all as specified and directed by Engr-in Charge

S&F MCB of Single pole of rating 40 Amps including taking down the old one complete all as specified and directed by Engr-in-Charge.

S & F sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with two pin & earth plug and socket complete with MCB SP 20 Amps 240 volts complete all as specified and as directed.

Supply only switch piano flush type single pole, one way, 5/6 Amps complete all as specified and directed.

Supply only for socket outlet 2 in 1, 3pin 5 amps 230 volts complete all as specified and directed by Engr-in Charge

Supply only for switch piano flush type 15 amps single pole one way complete all as specified and directed by Engr-in Charge

Supply only for socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed by Engr-in Charge

Supply only for bell push 5 amps 230 volts flush type complete all as specified and directed by Engr-in Charge

Supply only for call bell of multi music type A/C 230 volts complete all as specified and directed by Engr-in Charge

Supply only for Electronic fan regulator dimmer type,450w , 250 volt complete all as specified and directed by Engr-in Charge

Supply only for LED bulb 9 w high sutable for lamp holder complete complete all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro

Supply only for 20Watts LED light fitting, basic all purpose surface and wall mounted LED batten 20Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No. all as per Cat No.LTTB4F20WLED/W of C&S or equivalent of other specified makes fixed on surfaces of wall or ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro/Surya

Supply only for 10Watts LED light fitting, basic all purpose surface and wall mounted LED batten 10 Watts with aluminium housing and integrated electronic driver including 10W LED tube - 1No. all as per Cat No.LTTB2F10WLED/W of C&S or equivalent of other specified makes fixed on surfaces of wall or ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro/Surya

Supply only for 10 Watts environmental friendly, ultra moders, energy saving, surface mounted , decorative oval bulk head edge-lit LED luminaire comprising of high brighthess LEDs all as per Cat No SIRIUS/10W of C&S or equivalent of other specified makes all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro/Surya

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion complete all as specified and as directed.

DRISTEE ASSOCIATES (BID ID -3083080)

PURBANCHAL BUILDERS (BID ID -3081805)