Regarding supply maintenance and repair of electric pumps, motors, bore for water supply scheme for the year 2025-2026 under municipal council beed

Amount

Repair and maintenance of 200 HP pump at kadiwadgaav and ith WTP

complete removing of the 200 HP Vertical turbine pump including removing of vertical hollow shaft squirel cage induction motor from the pump by dismetaling the cable and removing the top shaft etc 60% erecting charges of RS. Uo 6 mtr column pipe

Removal of couimn pipe more then 3 for balance 7 pipes i.e 8 joints of 200 mm dia pipe 60% erection charges of rs

dismantiling of 200 Hp vertical turbine pump blow assembly

providing bowl assembly neck ring from gum metal bronz material prepring cutting machining polishing etc. complete

providing and fitting ss column pipe nut bolt with double washer of size 3.5 inch

providing and fabricating pump strainer with material and labours etc

providing and fabricating blow assembly impeller colet of size 140 mm 5/6 50mm x 60 mm

fabricating line shafts copling from ss material with key way size id 150 mm OD 177 mm etc

providing rubber ring for spider etc.

providing and fabricating blow assembly shafts SS sleeve of size ID 54 mm OD 66 mm.

providing and fabricating bowl assembly bush gun metal preparing casting mechining fixing boarding.

providing fabricating fibrer spinder bush with boring of size OD 85 mm, ID 66 mm I= 10 mm etc.

impeller balalncing checking polishing machining etc

Proving and fixing blow body etc

Line shaft thorowing checking balancing on lathe

boring the gland body

providing and fixing bowl assembly stud of 16 mm (S.S)

removal of bowl assembly from jackwell with life guard using oxygen.providing and fixing new motor housing

providing and fixing new motor housing

Provind and fixing new motor rolar bearing nipal

providing and fixing S.S. sleave.

Providing and fixing New Rolar Bearing 29320 fag.

providing and fixing new top shaft 5 fit 6 inch Dai long shaft

providing new top shoft cutting machine complete

above item transportation

Bearing Oil No 68 make oil (CASTROL,Vidol etc)

supply and topping up of transformal Oil PWD electrical Csr

filration of transformer oil at both locations as per PWD electrical CSR

Transportation of oil filtering machine

Reapiring of Motor

complete rewinding of 200 HP VSS motor with super enameled copper wire F class insulator.

providing and fixing motor bearing SKF 10321

providing and fixing cable lugs for all 10 nos starter of 200 hp 1650 amp ACB 6 Nos 800 amp 12 nos including glands ovehauling of starter

providing and fixing 630 amp power contactor.

providing and fixing 330 amp contractorla 5/f 400803

providing and fixing motor protection OV relay

providing and fixing motor protection UV relay

providing and fixing on/off dealy timer

Repair of air blow motor 40 HP

Repair of air blow motor 20 HP

Repair of air CFL motor 3 HP

Repair of 2 hp motor

repair of starter for motor up to 40 hp

repair of 40 hp submersible pump and motor

Overhauling of CFL gear box with oil

Repair And maintance of 200 HP pump Control Panel at kadiwadgav and Ith WTP.

Repair And maintanc of 40 HP pump Control Panel at kadiwadgav and Ith WTP.

providing and repairing 1600A ACB

providing and repairing 800A ACB

200 HP motor connection plate

copper patti 25/3 starter

200 HP motor couple jointer ruber bush

providing and fixing 200HP 6315 bearing

repairing of 12.5 HP open well motor

1 HP single phase subimmersible pump

2 HP single phase subimmersible pump

3 HP three phase subimmersible pump

5 HP three phase subimmersible pump

7.5 HP three phase subimmersible pump

HDP Pipe 1''

HDP Pipe 1.25''

HDP Pipe 1.5''

2'' G.I. Pipe

2'' G.I coupling

Starter L.T.

Starter covering box

63 A kitkat

3 core cable 2.5 sqmm copper

3 core cable 4 sqmm copper

6mm service wire

Nylon dori 12,14,16mm (Kg)

nipple stainless steel

End cap

clamp

GURU ENTERPRISES (BID ID -6846215)

SABIR CONSTRUCTION (BID ID -6846246)