PERIODICAL SERVICES IN VARIOUS BUILDINGS IN ZONE-A AND OTHER AREAS OF DEFENCE LAB JODHPUR

Amount

M&L preparing old distempered or colour wash surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil, greasing spots, removal of nails and filling the holes with putty and applying one coats of distemper oil emulsion of approved tint including putty in patches as required complete all as specified & directed by Engineer-in-charge.

M&L preparing old distempered or colour wash surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil, greasing spots, removal of nails and filling the holes with putty and applying two coats of distemper oil emulsion of approved tint including putty in patches over a coat of primer as required complete all as specified & directed by Engineer-in-charge.

M&L preparing old distempered or colour wash surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil, greasing spots, removal of nails and filling the holes with putty and applying one coats of distemper oil emulsion of approved tint including putty in patches as required complete all as specified & directed by Engineer-in-charge.

M&L preparation of old plastered surfaces of walls by complete removing existing treatment and applying two coats of distemper oil emulsion of approved tint over and including a coat of birla white wall care putty 2 to 3 mm thick to get a uniform smooth surfaces over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L preparing old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.

M&L preparing old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.

M&L preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.

M&L preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.

M&L preparing old plaster/ concrete/stone surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil and greasing spots, putty in patches and applying one coat of cement base paint complete all as specified & directed by Engineer-in-charge. Note : Work will be executed upto 10.00 metre height quoted rate deemed to incluede scaffolding/ladders and sarety equipments. Note : Work will be executed upto 10.00 metre height quoted rate deemed to incluede scaffolding/ladders and sarety equipments.

M&L preparing old plaster/ concrete/stone surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil and greasing spots and applying two coat of cement base paint complete all as specified & directed by Engineer-in-charge. Note : Work will be executed upto 10.00 metre height quoted rate deemed to incluede scaffolding/ladders and sarety equipments.

M&L preparing old white wash surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil,greasing spots,removal of nails and filling the holes with putty and applying two coats of white wash of approved tint complete all as specified & directed by Engineer-in-charge.

M&L preparing old white wash surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil,greasing spots,removal of nails and filling the holes with putty and applying two coats of white wash of approved tint complete all as specified & directed by Engineer-in-charge.

M&L preparing old plaster/ concrete /stone surface of walls by brooming down or steel wire brushing scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil and greasing spots and applying two coat of water base paint( exterior emulsion) over a coat of primer completed all as specified and directed by Engineer-in-charge. Note : Work will be executed upto 10.00 metre height quoted rate deemed to incluede scaffolding/ladders and sarety equipments.

Removing of small vegetation/bushes/roots/plants etc from roof slab, parapet and walls of building and removing of rubbish to a distance not exceeding 50 m including making good distrubed surface by repairing like plaster etc which is necessary complete all as specified & directed by Engineer-in-charge.

Complete removal of strains, dirts , black spots, insoluble black/white blooms visible on the rock face/keyed pointed jodhpur stone aprarence comes complete all as specified & directed by Engineer-in-charge. Note work will be executed up to 15.00 meter height rate deemed to incluede scaffolding/ladders and sarety equipments.

Taking down cement or cement lime plaster, any description on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L 15 mm thick, plaster in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion paint of approved tint over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L rendering 10 mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L preparation of newly plastered surfaces of ceilings and applying two coats of distemper oil emulsion of approved tint over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L preparing newly plastered surfaces and applying three coats of white wash of approved tint complete all as specified & directed by Engineer-in-charge.

Racking out joints/ pointing to squared rubble masonry built in cement mortar or cement lime mortar, coursed or uncoursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed by Engineer-in-charge.

M&L keyed pointing in cement mortar (1:3) to squraded rubble masonary coursed or un coursed complete all as specified & directed by Engineer-in-charge.

M&L rendering 15 mm thick plaster in cement mortar (1:4) mixed with WPC on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed by Engineer-in-charge.

Supply only Liquid water proofing compound all as specified & directed by Engineer-in-charge.

M&L for preparation of old painted surface and applying a coat of synthetic enemal paint over 10 cm width or girth of surfaces of any description complete all as specified and directed by Engineer-In-Charge

M&L for writing letters or figures (Block) with synthetic enamel paint all as specified and directed n.exc 30 cm height.

M&L for making stops, commas, short lines dashes, hyphens, brackets etc with synthetic enamel paint complete all as specified & directed.

M&L for index hands (Natural size) or arrows (upto 40 cm long) complete all as specified & directed.

MAA AISHA TRADERS SIWANCHI GATE (BID ID -3116046)

Continental Engineers and contractors (BID ID -3125251)

M.A. MUNSHI AND CO. (BID ID -3125036)

m/s Firoz khan (BID ID -3114482)

vinayandsons (BID ID -3114829)

HOODA CONSTRUCTION COMPANY (BID ID -3112906)

SHRI BHIKSHU ART AND CONSTRUCTION CO (BID ID -3115921)