WELCOME MAINT, PERIODICAL SERVICES AND REPAIRS TO TILING, JOINERY, FLOORING, PLASTERING, ROOF AND PETTY REPAIR FOR OTM/MD ACCN AT AGE B/R LEKHAWADA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Resecuring or easing and adjusting without taking down Shutters of any description n exc 1 sqm each by tightening hinges/screws and nailing etc complete all as specified.

All as per item No- 01 above but exc 1 sqm and n. exc 2 sqm each complete all as specified.

Taking down shutters of any description n exc 1 sqm each and refixing in same opening after easing, adjusting, repairing / replacing hinges / builders hardware etc complete all as specified.

All as per item No- 03 above but exc 1 sqm and n exc 2 sqm each complete all as specified.

S&F in repairs aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all as specified

S&F in repairs Aluminium anodised, barrel tower bolts of extruded section and fixed of 200 mm long complete all as specified

S&F in repairs aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified

All as per item No- 7 above but fixing only complete all as specified

S&F in repairs Butt hinges 100 mm long , medium weight, cold rolled mild steel, and fixed complete all as specified

S&F in repairs Butt hinges100 mm long , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified

S & F in repairs Continuous (piano) hinges 30 mm width of flap when opened, mild steel, bright finish or electrogalvanised complete all as specified ( Note- Taking down of shutters of CBs to be paid in respective above items)

S&F in repairs extruded aluminium alloy handles150 mm long , fabricated type, anodised complete all as specified

S&F in repairs Casement stays, size 300mm, with hinged joint and two plates, with studs complete all as specified

S&F in repairs Hasp and staple 125 mm , safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F in repairs brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

S&F in repairs Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified

S&F in repairs Door closer of aluminium dia extruded section body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 61 to 80 kg and fixed complete all as specified

All as per item No- 17 but fixing only above items complete all as specified

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete including making good the floor surfaces after installation complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified

All as per item No- 21 from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified

S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads/ oil putty in square n exc 0.5 sq. m in each pane complete all as specified

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

Taking up or down steel /UPVC water tubing and connections,15 mm bore complete all as specified

Taking up or down steel /UPVC water tubing and connections,20 mm bore complete all as specified

Taking up or down steel /UPVC water tubing and connections,25-32 mm bore complete all as specified

Refixing/ fixing only old steel tubing and connections 15 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

Refixing/ fixing only old steel tubing and connections 20 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

Refixing/ fixing only old steel tubing and connections 25-32 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

S&F 15 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F in repairs 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F 25 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F in repairs 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

S&F in repairs 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

S&F in repairs 40 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified

Disconnecting existing tanks exc 250 and n. exc 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exc 500 and n. exc 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exc 1000 and n. exc 3000 ltr (including UG sumps) , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Cleaning of existing water tanks exc 2000 ltr but n.exc 5000 ltr capacity including under ground sumps, removing all loose scale, dust, dirt etc from tanks ande from mouths of circulating pipes etc and spreading bleeching powders in bottom of tanks complete all as specified

S&F in repairs 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks complete all as specified

S&F in repairs 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks complete all as specified

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified

S&F in repairs CP (fancy type) Stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repairs fancy type CP Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repairs fancy type CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S&F in repairs 100 mm dia Swivel shower of PTMT any colour for fixing with 15mm pipe including Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colourcomplete all as specified

S&F in repairs Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified

S&F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs 25 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(Minimum weight 25mm-455gms) complete all as specified

S&F in repairs 32 mm bore waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms) complete all as specified

S&F in repairs 40 mm bore waste coupling of PTMT (half or full threaded).(Minimum weight 40mm-60 gms) complete all as specified

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms) complete all as specified

S&F in repairs Grating doom round 140 mm size of PTMT.(Minimum weight 50gms) complete all as specified

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified

S&F in repairs looking mirror of size 450x600 with aluminium frame mounted on 6mm ply confirming to IS, with 2 Nos of hanging hooks fixed in repairs complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed

M&L for glazed ceramic coloured tiles 300x200x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for coloured vitrified tiles (Light shade) 10 mm thick ( ( square/rectangular) polished, area of each tiles not exceeding 0.36 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as specified and as directed

M&L for coloured vitrified tiles (Light shade) 10 mm thick ( ( square/rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as specified and as directed

All as per item No. 74 & 75 above , but on vertical surfaces/ skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, infloors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including 15 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in window cill complete

M&L for 20 mm thick granite slab/ tiles (of any type and colour) machine cut type, laid in floor, platforms and pillars etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding/rounding on edges if required and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified

Taking down chowkats or frame with shutters (without taking off shutters from frames ) size n. exceeding 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frame with shutters (without taking off shutters from frames ) size exceeding 1.5 Sqm but not exceeding 4.00 sqm each complete all as specified and as directed

Taking down of shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified

S&F Framed work (angle iron 45x45x5mmthick) as in doors / gates of angle or other section etc door to be prepared for hanging or sliding on hinges or rail etc Fe-290 (Gde E-165) complete all as specified

S&F 30 mm thick Flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of prelam PVC sheet used instead of plain colour PVC sheet. Stiles and rails feathered at edges the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F in repairs Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 150 mm x 2 Nos in each door, hinges 3 Nos each and anodised aluminum snap beading screws etc. complete all as specified.

S&F Butt hinges 100 mm long , medium weight, cold rolled mild steel, and fixed complete all as specified

S&F Aluminium anodised,barrel tower bolts of extruded section and fixed of 150 mm long complete all specified

S&F Extruded aluminium alloy handles150 mm long , fabricated type, anodised all as specified

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F for 2nd class hardwood plain, solid,straight chowkats of CBs and frames,wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified

M&L for Medium density fibre board interior grade 18 mm thick solid construction type, fixed in CBs door shutters on timber frame work with screws /nails complete all as specified.

M&L for 0.9 mm thick Decorative laminate type-1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified

S&F butt hinges type B-12 or (overlay/ self / auto closing hinges ) for cupboard / shelves shutters of size 125 mm complete all as specified

S&F Pre-laminated particle board 9 mm thickness,exterior grade prelaminated both sidewith decorative choice lamination fixed to Aluminium frame work in doors/ partitions with beadings/ cleats etc complete all as specified

S&F in repairs Solid PVC Wall cladding/ Lining consisting of 5mm thick Plain/ wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing fixed to wall complete all as specified and directed

S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified

Cutting holes in brick walls built in cement mortar for inserting/ taking out hold fasts/ pipes etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required ( depth of embedded portion of holdfasts/ pipes/ lugs exc half brick but n. exc one brick and measured from the face of walls) complete all as specified

S&F in repair Vitrious china wash down water closet pan (padestal pattern ) white including connection to outgoing pipes and to flushing pipe , fixing of new Plastic water seat closet cover black/ white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified

S&F in repairs, vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste fittings/ coupling CP brass 32mm dia with long screwed shanks & fly nuts

S & F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & connection to CI 'P' trap, 100mm, complete all as specified

S&F in repairs 10 ltr capacity PVC Valve less , syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and fitted to flush pipe complete all as specified

S&F in repairs Plastic water seat closet cover black/ white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device

Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as specified

M&L for brick work with FLY ASH bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

M&L Brick work with Fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified

M&L for rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all asspecified

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified

M&L for rendering 5 mm thick on ceiling surfaces in CM 1:3 complete all as specified

M&L for applying two coats of OBD on newly plastered surfaces over a coat of primer over a coats of wall care putty 1 mm thick including preparing the new wall surfaces complete all as directed

M&L for Preparation of newly plastered surfaces of ceiling and and applying Two coat of oil emulsion distemper (OBD) over a coat of putty 1 mm thick including preparation of new surfaces complete all as specified

M&L for preparation of new surfaces of wall and applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

S&F MS flat iron as in hold fasts and similar articles confirming to Fe- 310-0 and fixing in ( PCC 1: 2 :4 bed block ) complete all as specified

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate for bed block, coving on chajjas and kerbing on roof area etc including necessary form work complete all as specified

S&F in repairs for low density polythelyne (flexible) 32 mm bore pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete as in outlet pipe for WHB etc. complete all as specified

M&L for 2 coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as directed

M&L for 2 coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel surface of any description over 10 cm width and girth complete all as directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified

M&L for 75mm thick PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection/ Paths etc finished even & fair complete all as specified

M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. finished even and rough to reciving top layers complete all as directed

M&L for Rubber moulded Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and as directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for Glossy finished pre-polished ( coloured) machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658-2006 of 60 mm thickness , M-35 grade with grey cement and pigments complete all as specified

Providing cement concrete rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding, roof kerbing and mud stops etc. type B-1, 1:3:6 (20 mm graded crushed stone aggregate) complete all as specified and as directed

S&F in repairs Stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers& waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified

Demolition of cement concrete of any description as in roof padding , coping, chajja etc. water tank bases on roof etc.unreinforced (other than ground floor) complete all as specified. Note:- Debris/demolished material to be removed out of MD land or 500 m away from the work place in low lying area.

M&L for 25 mm average thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof levelling course complete all as specified

M & L for rendering 10mm thick in cm (1:3) on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound to be measured & paid separately.

Supply only integral water proofing compound complete all as specified

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non wove fabric (wt. not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 on roof surfaced by forced applicaion complete including taking down/removal of existing treatment complete all as specified

M&L for applying one coat of aluminium paint on app membrane all as specified

Dismantling of plain or corrugated steel/ FRP sheeting, any gauge, thickness etc as in roof covering/ wall cladding etc. complete all as specified

Pre- painted galvatume aluminum zinc coating GI based Plain/ corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated with two corrugations side lap fixed with coach screw and washer in roof and / plain sheeting in wall cladding / fencing on iron frame etc complete all as specified

Dismantling of wall/partition wall and ceiling boards (Fibre, pulp insulation etc) of any thickness including cover fillets and frame work complete all as specified

Demolition of wall and ceiling boards (Fibre, pulp insulation etc) of any thickness including cover fillets and frame work complete all as specified

S&F in repairs 12 mm thick perforated particle boards/ tiles fixed in ceiling for insulation/ accoustic purposes with water proof topping of size 600x600mm of (armstrong/ gyprocks) , fixed to snap grid or aluminium frame work complete all as specified

S&F 12 mm thick perforated particle boards/ tiles fixed in ceiling for insulation/ accoustic purposes with water proof topping of size 600x600mm of (armstrong/ gyprocks) , fixed to snap grid or aluminium frame work complete all as specified

S&F 605x605mm size anodised aluminium snap grid frame work for false ceiling including hangers of 3 mm dia wire complete all as specified and as directed

All as per item No-144 above but repair/ fixing only by tightening/ fixing of binding wire or mild steel 4 mm dia wire complete all as specified

M&L for 12mm thick Gypsum Board seamless Ceiling as in curved, sunken or raised surface of any design as approved and finishing the surface fair by filling the joint with POP and applying two coat of Oil Bound Distemper over a coat of primer inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats incuding dismentling complete all as specified and directed by Engr-in-charge Note :- Flat area will be measured.

M&L for 12mm thick Gypsum Board seamless Ceiling as in flat surface, finishing the surface fair by filling the joint with POP and applying two coat of Oil Bound Distemper over a coat of primer inlcuding GI frame work as flat surface approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats incuding dismentaling complete all as specified and directed by Engr-in-charge

S&F Powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows ventilators and partation with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Pre-laminated particle board 9 mm thickness,exterior grade prelaminated both side with decorative choice lamination fixed to Aluminium frame work in doors/ partitions with beadings/ cleats etc complete all as specified

S&F Morticelock aluminium anodised vertical type 04 levers 100mm size with keys complete all as specified and as directed by Engr-in-Charge

Supply & Fix froasted glass 6mm thick for windows and urinal partition.

S&F 6mm thick clear toughened glass for aluminium doors and windows.

S&F in repair viterous China table top wash hand basin white size 160mm x 495mm x 365mm as per Jaquar Cat Part SLS-WHT-0558

S&F in repair viterous china extended wall hung WC white bowl size 775mmx360mmx660mm including dual flush fitting and cisturn and including soft close seat cover as per Jaquar Cat Part No CNS-WHT -WS-11, CNS-WHT-WCF-1( Dual flush fittigns), CHS-WHT-CSO-1 (Cistern ), CNS-WHT-WCS-1 (Soft close seat cover)

S&F in repair viterious china urinals with sensor size 710mm x 485mm x 300mm as per Jaquar cat part No URS-WHT-0704 and sensor cat part No SNR-51097 (Sensotronic sensor flushing valve for urinal with complete kit (suitable for urinal URS-WHT-704)

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good disturbed surfaces.

M&L PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including 10mm dia MS round bars as in tie bars fixed to fencing posts including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

S&F 4 mm dia galvanised steel wire 150x100 mm Mesh (chain link fencing) made up matress fixed to any type of std rails straining bolts etc incl provn of binding wire

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Gde E-165 (Fe-290) complete all as specified.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm

M&L preparation of new steel surfaces of any description not exc 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD) complete all as specified

M&L for Preparation of old decorated surfaces of Ceiling spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of distemper oil emulsion (OBD) on ceiling surfaces complete all as specified and directed

M & L for Complete removal of existing treatment and preparation of old decorated surfaces of walls , cornices by applying two coat of oil emulsion distemper over a coat of wall care putty to make surfaces smooth and good by rubbing with emary papers complete all as specified

M&L for preparation of old surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and directed

M&L for preparation of old surfaces of wall and applying one coat of Cement base paint complete all as specified and directed

M&L for preparation of old wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of Synthetic enemal paint complete all as specified

M&L for preparation of old steel surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of Synthetic enemal paint complete all as specified

Cleaning of existing water tanks exc 2000 ltr but n.exc 5000 ltr capacity including under ground sumps, removing all loose scale , dust, dirt etc from tanks ande from mouths of circulating pipes etc and spreading bleeching powders in bottom of tanks complete all as specified

S&F in repairs CP Health Faucet ABS body with wall hook and 1.0 mtr Chrome plated hose pipe complete all as specified .

S&F in repairs CP Toilet paper holder with flap guard complete all as specified . Make - Cera, Cat part No- F5007110

S&F in repairs CP Soap dish complete all as specified .

S&F in repairs CP Tumbler with holder complete all as specified . Make - Cera, Cat part No- F5002107 (Montana)

S&F in repairs CP Overhead rain shower - ABS type Square 180x180mm complete with all fittings as specified . Make - Cera, Cat part No- F7010501

S&F in repairs Corner glass shelf 300x300 mm with "F" type brackets complete all as specified .

S&F in repairs Pre-laminated particle board 18/19 mm thickness,exterior grade prelaminated both side with decorative choice lamination fixed to Aluminium frame work in doors/ partitions/ CBs shelves etc with beadings/ cleats etc complete all as specified

S&F 25mm dia Curtain /Drapery rod, anodised aluminium alloy with ornamental brackets 02 Nos for each doors/windows etc.complete all as specified

S&F bright finished coloured aluminium anodised alloy ornamental finish type brackets/ knobs for 20/25 mm dia curtains / drapery rod complete all as specified

S&F Aluminium alloy door cills having rubber strips in bottom, fit to door size complete all as specified

S&F Power coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

ALBA AC AND REF SERVICES

Shree Builders

Shreeganesh Construction

divyarsh entrprise

Ramdev and Sons

JIYA CONSTRUCTION

ARTI CONSTRUCTION