REPAIR TO TOILETS AND CONNECTED ITEMS, REPLACEMENT OF RAIN WATER PIPE LINE AND CLEANING OF SPOUTS OF NON ACCESSIBLE ROOFS AND REPAIR / MAINT OF 25 YARD MINIATURE RANGE IN TECH AREA AT AF STN PHALODI

Amount

Taking down cement plaster on brick or stone wall surfaces etc., including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete unreinforced of any type any level and at any position complete all as specified and directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and precast concrete articles complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks built in CM 1:6 type C-1(1:3:6) (20 mm graded aggregate) exc. 10 cm in width and setting in mortar complete all as specified and directed.

Rendering 15mm thick plaster in CM 1:3 on fair faces of brick work or concrete surface mixed with WPC as per manufacturer's instructions and finished even and fair without using extra cement as in sunken floors complete all as specified and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

M & L for Bitumen blown any type to concrete surfaces at the rate of 1.5kg per sqm per coat as in sunken floor complete all as specified and directed.

M&L for APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plus’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or Hydro Stop manufactured by TIKITAR DANOSA (INDIA) Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, (weight not less than 150 gms/sqm) with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and the joints sealed properly all as per manufacturer’s instructions including taking down old existing roof treatment or APP membrane and providing a cushion layer of coarse sand of thickness 25mm to protect polymeric membrane complete all as specified and as directed. Note: (i) Polymeric membrane shall be laid in sunken floor and on sides upto finished floor level (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid separatgely.

Plain cement concrete 1:5:10 type E 2 ( 40mm graded stone aggregates as in filling of sunken floors complete all as specified and directed.

M&L rendering 10mm thick on ceiling plaster in CM 1:3 and finished even & smooth complete all as specified and directed.

S&F Cast iron soil waste & vent pipe(sand cast) in any length with or without ears with cement joints fixed to wall 75mm bore including taking down of old pipes complete all as specified and directed.

All as per item no 11 above but 100 mm bore complete all as specified and directed.

S&F CI bend (any radius) with oval access door 75mm bore complete all as specified and directed.

All as per item No 13 above but 100mm bore complete all as specified and directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore complete all as specified and directed.

S&F 50 mm bore of pipe Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

All as per item No 15 above ,75 mm bore complete all as specified and directed.

S&F Cast iron vent cowl 100 mm bore complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces including finishing plaster surface even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Preparation of old decorative plastered surface of walls and applying one coat of cement base paint all as specified and directed.

S & F PVC SWR 110 mm dia with single socketed in any length fixed to walls with rubber ring joints fixed in repairs complete all as specified and directed.

S & F PVC bends 110 mm dia fixed to wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non - skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 10 mm thick for tiling laying in floor finishes complete all as specified and directed.

S & F in repairs rotational moulded High Density Poly-ethylene water storage tanks of capacity 250 litre and conforming to IS, hoisted and fixed in position and removing to store complete all as specified and directed.

S & F in repairs rotational moulded High Density Poly-ethylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed in position and removing to store complete all as specified and directed.

S & F in repairs rotational moulded High Density Poly-ethylene water storage tanks of capacity 1000 litre and conforming to IS, hoisted and fixed in positionand removing to store complete all as specified and directed.

S & F in repairs PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S & F in repairs ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

S & F in repairs ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified and directed.

S & F in repairs ball valves suitable for 25 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and directed.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and directed.

S & F 25 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Fixing only tubes of 25 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and directed.

Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and directed.

Supply & fixed in repairs, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S & F, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets complete all as specified and directed.

Supply & fixed in repairs, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs stop valves suitable for 20 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs bib tap suitable for 15 mm bore iron pipe, PTMT any colour, screwed for iron pipe and fixed (Minimum weight - 90 gms) complete all as specified and directed.

S & F in repairs bib taps, brass chromium plated, fancy type, screwed down, screwed suitable for 15 mm iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs brass CP pillar taps, 15 mm, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs PVC flexible waste pipe, 32 mm dia, suitable for WHBs including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S & F in repairs PVC flexible waste pipe, 40 mm dia, suitable for Urinals including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

Excavating over areas n exc 1.5m deep and getting out saw dust and sand cum (soft/ loose) on stop butt and rocochet pit complete all as specified and directed.

Removing the excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and directed

M & L for Sand filling with saw dust under floor or butt area before proper mixing sand and saw dustin ratio 1:1.5 (sand : sand dust) including well ramming & watering complete all as specified and directed

Removing damage filling / empty old bag (proof) n exc 50m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and directed

M & L for Sand filling the bags (proof) and laying around the butt of firing range as per users direction complete all as specified and directed Note :- (i) The firing range maintenance considered in three quaters (ii) Cost of bags are including in above mentioned items

M & L for 15 mm thick cement plaster in cement mortar 1:4 on any masonary surface, finished even and fair complete all as specified and directed.

M & L for applying two coats of cement base paint white or tinted in one or more tints and patteren as approved, on newly plastered wall surfaces including preparation etc complete all as specified and directed.

Beenu Co. Company

BHARAT CONSTRUCTION AND SERVICES

Aggarwal brothers and company