Thalassery Heritage Project-Pazhassi Smrithi Mandapam, Mavilanthodu, Wayanad- Museum and Gateway Project

Amount

Repair and Renovation

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.17 : Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.5.1.1 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak woodProviding and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

13.114 : Melamine polishing on wood work (one or more coat).

13.115 : Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.

od18734/2025_2026 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) ( roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness Supplied by client )

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

50.6.7.1 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.51.2 : Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats

11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

16.89 : Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Landscaping

Electrification Works

1.6 : Wiring for light / power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 2 Nos 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.6 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

od18825/2025_2026 : Supply, installation, testing and commissioning of 20W LED TUBE Light fittings for use on 240V AC supply including all accessories required for fixing as required.(Make: Dewton/ Havells/ Philips/equivalent)

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP 42/43)

90.12.7.42 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

od18858/2025_2026 : Supply, installation, testing and commissioning of 15W LED Bulb as required.(Make: Crompton, Havells, Philips)

od18860/2025_2026 : Supply, installation, testing and commissioning of 18W Round LED Panel Light as required.(Make: Luker, Havells, Wipro) (LMR)

90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C

od18865/2025_2026 : DECORATIVE LIGHTS Light fittings for use on 240V AC supply including all accessories required for fixing as required.(Make: Dewton/ Havells/ Philips/equivalent)

Security System, Air Conditioning, Fire fighter and detection equipment

od19185/2025_2026 : 2.5 Ton 3 Star Inverter Split AC 303V ADZ-R32 with Stabilizer of make: Voltas

od19186/2025_2026 : 6L Fire extinguisher with stand 8 Unit

Curator Component- Museum Display

od19187/2025_2026 : Curved Wall: Made of 18mm marine/BWP plywood with Mahagony Mahagony veneer with polish finish & screen material.Supported by 2'x2' frame work. Curve will be done with flexiply or HDF material with paint finish

od19188/2025_2026 : Pillars : Made of 18mmmarine/BWP plywood with Mahagony veneer with polish finish.

od19189/2025_2026 : Pillar Cladding: Made of 18mm marine/BWP plywood with Mahagony veneer with polish Finish

od19190/2025_2026 : Baluster barricade: Made of 18mm Calibrated plywood with polish finish

od19191/2025_2026 : Space filler Pillar: Made of 18mm marine/BWP plywood with white laminate

od19434/2025_2026 : Frames for Graphics - Frame1.5" width (40mm) with plywood with laminate surface for pasting graphics<br>

od19435/2025_2026 : Branding and Signages - ACP wood texture panel , 10mm Arcylic Letters<br>

od19436/2025_2026 : Branding and Signages - Made of 19mm birchply with 1.5mm Brushed steel finish - With Fittings Ticket Counter / Museum Office<br>

od19437/2025_2026 : Branding and Signages - Made of 19mm birchply with 1.5mm Brushed steel finish - With Fittings Toilet and wayfind signs<br> - Made of 19mm birchply with 1.5mm Brushed steel finish - With Fittings Toilet and wayfind signs<br>

od19438/2025_2026 : Individual display mural Display with static visiual panel: Made of 18mm marine/BWP plywood with Mahagony veneer with polish finish, red vevette and baluster.Frame for visual

od19445/2025_2026 : Terrain/Map table - Made of 18mm marine/BWP plywood with Mahagony veneer & suitable plain colour laminate of 1mm thick

od19446/2025_2026 : Table for TV control - Small table made of 19mm BWP plywood cladded with veneer with PU polish finish

od19447/2025_2026 : Wall - Made of 18mm marine/BWP plywood cladded with HDF with white emulsion paint finish. The top and bottom cladding is finished with Mahagony veneer with PU polish finish

od19448/2025_2026 : Curved graphics Wall - Made of 18mm marine/BWP plywood cladded with HDF. The top and bottom cladding is finished with with Mahagony veneer with PU polish finish. The inner wall will be cladded with 1mm suitable plain colour laminate

od19449/2025_2026 : Graphics Wall - Made of 18mm marine/BWP plywood with Mahagony veneer finish. Supported by 2'x2' frame work. The inner wall will be cladded with 1mm suitable plain colour laminate

od19450/2025_2026 : Borders are made of Mahagony veneer with PU polish finish

od19451/2025_2026 : Outside panel (Big) - Made of 18mm marine/BWP plywood frame of 2'x2' with HDF cladding with matching plain colour laminate of 1mm thick

Curator Component- Lighting

od19192/2025_2026 : LIVE END connector for Black Color Power track 3 phase 2Mtr Track(3Phase) - Black Color<br>

od19193/2025_2026 : DEAD END connector for Black Color Power track 3 phase Live End Black Color<br>

od19194/2025_2026 : L CONNECTORS FOR TRACK Dead End Black Color<br>

od19195/2025_2026 : Wire suspenders L CONNECTORS<br>

od19196/2025_2026 : WIRE SUSPENDER extra<br>

od19197/2025_2026 : Arrya Pro 4x- 25W Track Spot Light : Finished in Powder Coated Black with CCT of ON/OFF 3000K and 1800lumens with CRI>90 & NICHIA LED CHIP, UGR < 19 with Bartenbach Aluminium reflector- SP complete set with ON/OFF DRIVER<br>

od19198/2025_2026 : Arrya Pro 4x- 25W pendent Mounted Spot Light : Finished in Powder Coated Black with CCT of 3000K and 1800lumens with CRI>90 & NICHIA LED CHIP, UGR < 19 with Bartenbach Aluminium reflector- WFL complete set with Switching Driver Array Pro 4X Track spot 25W - SP - 3000K<br>

od19199/2025_2026 : 3 Phase Power Track - Black Color of 1 Meter Length Black Color Array Pro 4X pendent mounted 25W - WFL-3000K<br>

od19200/2025_2026 : 3 Phase Power Track - Black Color of 2Meter Length Black Color 1Mtr Track(3 Phase) - Black Color<br>

Curator Component- Graphics and Window Closing

od19209/2025_2026 : Window Closing - HDF cladding with paint finish<br>

od19210/2025_2026 : Graphics - Vinyl print with matte lamination with pasting<br>

Curator Component- UPS System

od19235/2025_2026 : APC 6 KVA UPS (Single Phase, Input & Single Phase Output APC<br>

od19236/2025_2026 : 12 v 65 Ah batteries Exide<br>

od19237/2025_2026 : Ms powder coated Rack + Inter linking Accessories Custom<br>

od19238/2025_2026 : Assembly charges for UPS System<br>

od19239/2025_2026 : Home UPS 5.2 KVA (Single Phase, Input & Single Phase Output Luminos<br>

od19240/2025_2026 : Battery 12V 120 Ah Tubular Battery Luminos<br>

od19241/2025_2026 : Ms powder coated Rack + Inter linking Accessories Custom<br>

od19242/2025_2026 : Assembly charges for Inverter System<br>

Curator Component- AV System & Interactive Video Display

od19253/2025_2026 : Scope of Video Content Creation – Pazhassi Raja & the First Revolt Against the British - The video content for the Pazhassi Raja & the First Revolt Against the British will be a 3–5 minute immersive narrative combining 2D/3D animation, motion graphics, and live reenactments to bring history to life. It will cover Pazhassi Raja’s resistance, guerrilla warfare tactics, key battles like Periya (1802), and his final stand in 1805, emphasizing his role as one of India’s first freedom fighters. The production will feature cinematic recreations, animated maps, archival content, and an engaging voiceover in Malayalam (primary), with English subtitles. A Kerala percussion-based background score and Dolby Atmos sound will enhance the storytelling experience. Designed for multi-screen projection and interactive museum integration<br>

od19254/2025_2026 : Scope of Video Content Creation – Pazhassi Raja & the Second Revolt Against the British - The video on Pazhassi Raja’s Second Revolt (1793–1805) will be a 3–5 minute immersive narrative, blending live-action dramatization, 2D/3D animation, motion graphics, and archival visuals to depict his guerrilla warfare tactics, alliances with Kurichiya and Kurumba tribes, and battles against British forces. It will showcase key events, including ambushes, betrayals, and his final stand in 1805, positioning him as a pioneer of India’s resistance movements. The content will feature cinematic recreations, animated battle maps, and a Kerala percussion-based background score, with narration in Malayalam and English.<br>

od19255/2025_2026 : WUXGA ultra-short throw laser projector with 5000 lumens brightness, 1,200,000:1 contrast ratio, and a 0.25:1 throw ratio for large screen sizes from 60” to 100”. It supports HDMI 2.0, VGA, RS232, USB-A, audio, and optional wireless connectivity. The projector offers 4K input support, digital keystone correction, edge blending, and built-in 16W speakers. The laser light source lasts up to 30,000 hours in eco mode, operating at 28 dB. It’s Energy Star certified, RoHS compliant<br>

od19256/2025_2026 : High-strength powder-coated steel mount for large projectors with enclosure, supporting up to 25 kg. Features adjustable arms, tilt (+/-15°), swivel (360°), roll (+/-10°), and height (2 + 2 feet extension). Includes secure locking and installation hardware<br>

od19257/2025_2026 : 4K Digital Signage Player featuring a four core processor with hardware-accelerated graphics and HTML5 rendering. It supports 4K UHD decoding at 60fps, offers HDMI and analogy audio outputs with Dolby Digital and MP3 support, and includes Gigabit Ethernet connectivity. Interactive control is enabled through RS232 serial, with storage capacity of up to 1TB. The player also boasts hardware-accelerated HTML5 support, operates on 12V DC, 3.3A power, and is designed for 0°C to 40°C temperatures and 20%-80% humidity conditions. it is certified for Federal Communications Commission, Conformité Européenne, and Restriction of Hazardous Substances compliance.<br>

od19259/2025_2026 : 75" 4K UHD LED Display with 350 nits brightness, 3840 x 2160 Resolution, Viewing Angle (H/V) 178/178, Tizen OS, multiple connectivity options (HDMI, USB, LAN), and . Slim, bezel-less design, 16/7 operation, built-in speakers, and VESA compatibility for easy mounting. Energy-efficient with auto-brightness adjustment

od19260/2025_2026 : Heavy-duty VESA-compatible brackets (100x100mm to 600x400mm) with micro-adjustments for levelling and tilt, high-strength powder-coated steel build, slim profile, and secure locking system. Supports displays weighing up to 65 kg.<br>

Curator Component-Curatorial Narative & Design

od19284/2025_2026 : Curatorial Narative & Design - Curatorial narrative, Research and compilation of panel content, Illustrations

Curator Component-Conveying and Installation

od19341/2025_2026 : Coneying Loading, Unloadind and Installation of all Curator Component such as MUSEUM DISPLAY / Lighting / Graphics and Window Closing / AV System / Interactive Video Display / Conduiting / Wiring Switching for displays / projectors / TV's / UPS line/ Earthing / Inverter line / DB's etc.

Extra AC Installation for Office

od19344/2025_2026 : Providing and fixing AC - Hitachi make Non-Inverter type 4-Way Cassette AC unit 1.5 TR Including cost of conveying , installation etc complete as per the direction of Engineer in charge<br>

Miscellaneous work

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.58.2.1 : Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.33.1 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od19664/2025_2026 : Providing and fixing 150mm UPVC Square Jointer ( make : Euro Guard ) in all heights with solvent cemet and washers etc. including making necessary connections with rain water pipes complete as per the Direction of Engineer in charge

od19665/2025_2026 : Providing and fixing 150mm UPVC End( make : Euro Guard ) in all heights with solvent cement and washers etc. including making necessary connections with rain water pipes complete as per the Direction of Engineer in charge

od19666/2025_2026 : Providing and fixing 150mm semi-Square uPVC gutter ( make : Euro Guard ) in all heights with iron brackets, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. ( Excluding cost of Upvc fittings)

od19667/2025_2026 : Providing and fixing in position FRP manhole cover and frame of required shape and approved quality Square shape 600x600 mm including cost of all material, labour, conveying, errection etc all complete as per the Direction of Engineer in charge

12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

7.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

8.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

9.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Panel Boards: CPRI certified reputed manufacturers make

MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent

Cables & wires - Finolex/KEI/POLYCAB/RPG/V-GUARD

Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent

Cable Glands & Sockets - REPUTED MAKE , Cosmos

Indicating Lamps - TEKINIC/RISHUB/STC, L&T, Schneider or equivalent

Ceiling/Exhaust fan: Havells, Orient, Usha, Crompton Greaves, Bajaj

10.DELUXE MULTI SURFACE PAINT SYSTEM: Make: JOTUN, Asian, Berger, Nerolas or eq. in the order of pref.

11.VETRIFIED FLOOR TILES/ CERAMIC GLAZED WALL TILES: Make: Khajaria, Jhonson, RAK, NITCO, Cera or Eq. in the order of preference and prior sample approval from KEL, Client

12.Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

13. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.

CUBIX INFRASTRUCTURES (BID ID -2219990)

saaj constructions (BID ID -2219238)