REPAIR/REPLACEMENT OF STREET LIGHT, EARTHING, LT CABLES, DG SETS, FLAME PROOF LIGHTS INCLUDING CONNECTED ITEMS AT AF STN BAKNAUR UNDER GE (AF) AMBALA

Amount

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engr-in-charge.

Dismantling concrete poles/ struts, any size complete all as specified and directed.

Dismantling steel poles/struts, any size complete all as specified and directed.

Supply, erection and fixing in true vertical position/as strut, Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type type 410 SP-31 (9.00 metres long) complete with painting on exterior portion of polewith 2 coats of synthetic enamel paint over a coat of primer complete complete all as specified and directed.

M&L for painting of PCC/steel poles 9/11 m long alongwith road/ peri meter upto 1.5 m height from pedestal, with two coats of synthetic enamel paint in 30 cm height 5 block of each airforce pattern incl painting of pole and writing pole Numbers with white paint on black circular base incl. marking of HT/LT with Painting of pole cross arms bracket with two coats of aluminum paint over a coat of red oxide primer complete all as specified all as directed by EIC .

Taking down unserviceable light fitting any description complete all as specified and directed .

Taking down the unserviceable bracket and material & labour new bracket made out of 40mm GI tubing light grade 1.5m bent to shape suitable for fixing of any type street light fitting fixed to steel/concrete pole with two MS clamps made out of 50 x 6 flat iron, 16mm dia bolts nuts and washers of suitable length complete all as specified and directed

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F LED street light fitting 60 Watt 230 V AC worm white outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including taking down old unserviceable wire dispose from site complete all as specified and directed.

S&F LED street light fitting 90 Watt 230 V AC worm white outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including taking down old unserviceable wire dispose from site complete all as specified and directed.

M & L for FRP looping box with hinged cover weather proof with locking arrangement and appropriate size of aluminium bus bar of capacity 100 amps for single phase 230 V, 50 Hz electric supply mounted on PVC insulators and fixed to pole by means of MS clamps, nuts boltss and washers including cables connection including one MCB SP 6 amps including taking down existing looping box complete all as specified and directed

S&F in replacement PVC insulated copper conductor cable, 3 core 1.5sqmm, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in connections complete all as specified and directed

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor derved with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire one twin core flat of size 6 sqmm solid aluminium conductor complete all as specified and directed.

S&F 1100 volts grade heavy duty two single core cables PVC insulated stranded aluminium conductor of size 6 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, two single core cable flat or circular and including taking down old unserviceable wire dispose from site complete all as specified and directed.

S&F in replacement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

Taking down after disconnection of old unserviceable of high mast light fittings and supply and fixing of LED based energy saving & environment friendly long life versatile flood light Lumos IP-65 of 200 W complete with front glass cover complete all as specified and directed

M&L for servicing of high mast light gear box including of oiling, greasing of wire rope and driving motor and replacement complete unsv wiring from connector to high mast light with suitable size of twin core copper wire including of taking down old unsv connector, complete all as specified and directed.

Supply and fixing of high mast panel with complete copper wiring ,ML contractor 4 pole AC3 18Amp 9 KW -03 Nos ,Timer 32 Amp , TPN MCB 63 Amp-01 Nos with complete busbar and including taking down old panel complete all as specified and as directed by Engineer-in-Charge.

Taking down old unservicable any type street lights and refixing after repair of street light /security lights including cleaning of perplex cover where ever required and tightening of loose connection on the pole, Complete all as specified and directed.

S&F in replacement driver/electronic control gear suitable for 35 W to 60 W LED street light fitting of any make as per site requirement, complete all as specified and directed.

S&F in replacement driver/electronic control gear suitable for 70W to120 W LED street light fitting of any make as per site requirement, complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m below normal GL with the top edge of the plate not less then 1.5 m below the normal GL connected to GI wire 4mm dia protected by 15mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) and chamber with PCC (1:4:8) type D2 using 40mm graded stone aggregate, coping with (1:3:6) type CI using 20mm graded stone aggregate and with RCC pit cover (50 mm thick) in 1:2:4 type B1 using 20mm stone aggregate, reinforced with 8mm for MS bar at 80mm c/c both way in lieu of CI pit cover with angle iron frame including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate No 3 of SSR Part I and including charcoal dust, common salt and earth lead connected to earthing test point testing of earthing including taking down/up existing unserviceable earthing accessories complete all as specified and directed. NOTE: if desired resistance is not found then entire earthing shall be re-done by Contractor without accruing extra cost to the Govt.

M&L for earthing with copper earth plate electrode 600 x 600 x3.15 mm thick buried directly in ground earth pit not less than 3.75 m below normal GL with the top edge of the plate not less then 2.50 m below the normal GL connected to copper strip 20x3mm protected by 50mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) and chamber with PCC (1:4:8) type D2 using 40mm graded stone aggregate, coping with (1:3:6) type CI using 20mm graded stone aggregate and with RCC pit cover (50 mm thick) in 1:2:4 type B1 using 20mm stone aggregate, reinforced with 8mm for MS bar at 80mm c/c both way in lieu of CI pit cover with angle iron frame including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate No 3 of SSR Part I and including charcoal dust, common salt, magnesium sulphate in layer 150mm thick in all side of plate and earth lead connected to earthing test point testing of earthing including taking down/up existing unserviceable earthing accessories and dispose off from site deppsited to MES store yard complete all as specified and directed. NOTE: If desired earth resistance is not found satisfactory then enitre earthing shall be re-done by Contractor without accruing any extra cost to Govt.

M&L in replacement for GI earthing wire 4mm laid in trenches / fixed on wall with saddles for inter connecting /extension in earthing including excavation and earth work complete all as specified and directed.

M&L in replacement for copper earthing strip 20mm x3 mm laid in trenches / fixed on wall for inter connecting /extension in earthing including excavation and earth work complete all as specified and directed.

M&L for Preventive maintenance of Normal GI/copper earth pit by checking earth resistance value of earth and maintain the record before and after treatment of earth by pouring of Mixture of chemicals like sodium carbonate , magnesium sulphate , common salt, charcoal etc for improving the earth resistance value it also includes any excavation required at site complete all as specified and directed. Note :- Chemical compound/Salt will be measured and paid seperately under respective item of the schedule.

M&L for Preventive maintenance of Chemical earth pit by checking earth resistance value of earth and maintain the record before and after treatment of earth by pouring of chemical compound used in chemical earthing etc for improving the earth resistance value less than 1 ohm it also includes any excavation required at site complete all as specified and directed. Note :- Chemical compound/Salt will be measured and paid seperately under respective item of the schedule.

S&F in replacement copper strip of size 32 x3.15 mm as earth continuity conductor buried in ground or fixed to wall/floor/ground provided with porcelain insulators space no less than 0.5 mtrs complete all as specified and directed.

M& L in repairs for Porcelain insulator fixing on wall for supporting the copper strip at distance 45 cm including nut bolt drilling hole etc complete all as specified and directed by Engineer-in-charge.

Supply and filling bentonite base earthing enhancement back fill compound in the earthing pit complete all as specified and directed. Note:- Earthing compound should comply with the latest Indian Standard.

M&L for topup of common salt in the earthing chambers for improvement existing of earthing resistance value complete all as specified and as directed.

M&L for 10-15 mm thick cast iron earth pit cover of size 32cmX32cm complete all as specified and as directed.

M&L for 10-15 mm thick cast iron earth pit cover of size 28cmX28cm complete all as specified and as directed.

S&F single phase flame proof Exhaust fan with louvers, of size 380mm, 1440 RPM including fixing as per standard complete suitable for hazardous locations of zone 1 & 2, Ex 'd' with relevant IS & IP65 protection complete including taking down unserviceable Exhaust fan and depositing MES store yard complete all as specified and directed.

S&F in replacement Flameproof Flood Light Fitting Circular type CAT.NO. – WG/1240 ENCLOSURE : FLAME PROOF (Ex – d ), G a s G r o u p IIA , IIB , IIC As per IS/IEC 60079-1 : 2014ting of 35W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.

M&L for painting of LT panels of any size and capacity, with two coats of synthetic enamel paint with two coats of aluminum paint over a coat of red oxide primer complete all as specified all as directed by EIC .

S&F in replacement 300 watt security search light in stainless steel body cum reflector complete with toughened front glass & retaining ring ,pilfer proof & captive bolting system & incorporated vibration isolators,300 watt LED lamp & its control gear suitable for installation inside the watch tower cabin 1 mtr tripod stand and 2.5 sqmm PVC round copper conductor, 3 core cable -7M long all as per MAKE : (Sigma model No 24455L TS or equivalent as approved by GE. Note: the light fittings for the above should be manufactured as per IS code 10322 & 13383 A type test including photometry test certificate from a Government test House Laboratory should be submitted with the offer .The IP classification for the light should be minium Ip 65 the light should produce at 10 meter the source an illumination of 7000 lux when measured along the axis AND RANGE 650 Mtr.

Dismantling/Disconnecting electric connection of underground LT,XLPE Cable ,1.1KV upto 240 Sqmm from both sides and locating the fault in LT cable with fault locating machine in the entire length and removing the moisture from LT cable charging the LT cable with the help of modern fault detector equipment by expert engineers and reconnecting and commissioning of cable complete all as directed by Engr-in-Charge. Note : The work will be executed after obtaining proper shutdown from main power house.

S&F in repair new flame proof and weather proof Switch rotary type with termination box in LM6, 25A, double pole 250V suitable for hazardous locations of zone 1 & 2, Ex 'd' with relevant IS & IP65 protection complete all as specified and as directed.

S&F in repair Switch flame proof rotary type with termination box in LM6,16A ,single pole 250 V complete all as specified and directed.

S&F in repair flame proof switch socket & plug combined in LM6 cable termination box in LM6 ,16 A 250V ,2P+ earth complete all as specified and directed.

S&F in replacement LED light fitting 2x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.Make: Sudhir/ Baliga/Shyaam Switchgear

S&F in replacement LED light fitting 1x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.Make: Sudhir/ Baliga/Shyaam Switchgear

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil for Erection of pole/laying cables etc., and getting out complete including forming bottom surfaces to required levels/slopes etc complete all as specified and as directed

Excavation in trenches for foundation not exceeding 1.5 meter wide and exceeding. 1.5 meter depth but not exceeding 3 m depth and not exceeding. 10 sqm on plan and getting out in soft/loose soil for laying cable of different size and erection of pole and assay etc complete all as specified and directed.

Returning, filling-in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material(soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and laying double wall corrugated (DWC) high density polyethylene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground cables of outer dia 78mm with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection complete all as specified and directed Note: Earthwork and excavation shall be measured and paid separately

M&L for boring/auguring suitable hole & insertion of 80 mm dia GI pipe including supply and inserting pipe not less than 600 mm below existing PCC/road/hard standing complete all as specified and directed. Notes:-Cost of equipment, tools & plants & material required for boring shall be deemed to be included in the rates quoted

M & L for PCC,1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation, base of pole and in embedding blocks for stays complete all as specified and directed.

M&L for PCC,1:3:6 type C2 (using 40mm graded mechanically crushed stone aggregate)as in coping/collar of electric poles including use of necessary form work and concrete finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC, (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregate as in coping etc including necessary form work complete all as specified and directed.

M&L for crimping type heavy duty copper lugs/ferrule suitable for cable cross sectional area16/25 Sqmm complete all as specified and directed.

M&L for crimping type heavy duty copper lugs/ferrule suitable for cable cross sectional area50/70 Sqmm complete all as specified and directed.

M&L for crimping type heavy duty copper lugs/ferrule suitable for cable cross sectional area95/120 Sqmm complete all as specified and directed.

S&F LT End termination heat shrinkable End joints of size 70 to 120 sqmm 3.5 core complete all as specified and directed

S&F LT End termination heat shrinkable End joints of size 16 to 50 sqmm 3.5 core complete all as specified and directed

S&F LT heat shrinkable straight through joints of size 70 to 120 sqmm 3.5 core complete all as specified and directed

S&F LT heat shrinkable straight through joints of size 16 to 50 sqmm 3.5 core complete all as specified and directed

Taking UP/down the existing cables any description from trenches /poles/ walls etc complete all as specified and directed. Note :- Earthwork shall be measured and paid separately.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core X 10 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core X 16 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 25Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 35Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 50Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 95Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 120Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

S&F double door VTPN 4 way suitable for 4 pole MCCB as incoming & SP/TP MCB as outgoing, 200 Amps rated busbar, inter connection link, cable ties, earth bar etc complete all as specified and directed. Note:- MCCB & MCB shall be measured and paid seperately

S&F in repair MCCBs 415V,16KA,4 Pole 63 Amp with Adjustable thermal magnetic release complete all as specified and directed

S&F in repair MCCBs 415V,16KA,4 Pole 100 Amp with Adjustable thermal magnetic release complete all as specified and directed

S&F in repair MCCBs 415V,16KA,4 Pole 125 Amp with Adjustable thermal magnetic release complete all as specified and directed

S&F in repairs MCB TPN, 415V, 63A, 10kA complete all as specified and as directed

S&F in repair Voltmeter Digital type suitable for 50-520 VAC(P-P), flush mounting 96x96mm class 0.5 complete all as specified and directed.

S&F in repair Ammeter Digital type suitable for 0-200Amps flush mounting 96x96mm class 0.5 complete all as specified and directed.

S&F in replacement of off load change over switch 415 V, 4 pole, 100 A as per existing make and model or equivalent make as approved by GE. complete all as specified and directed.

S&F in replacement of off load change over switch 415 V, 4 pole, 125 A as per existing make and model or equivalent make as approved by GE complete all as specified and directed.

S&F in replacement off load change over switch 415 V, 4 pole, 250 A as per existing make and model or equivalent make as approved by GE complete all as specified and directed.

S&F in replacement of Contactor 3 pole 415 volts 200 Amps ML -12 (control voltage 230/415 as per existing model.) complete all as specified and directed

Servicing of DG set of Engine Greaves/Kirloskar/Cummins/Mahindra of 500 KVA checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, toping up level the existing engine oil, coolant top up and in replacement, supplying & fixing of following spares :- (i) service kit for elements of fuel filter, Air filter, Lub filter one set each (ii) top up of coolant in radiator (iii) Testing of engine control panel (iv) Cleaning of radiator, minor repair of leakages to be rectified. (v) hose pipe set (vi) fuel pipe/lubricant pipe (vii) Engine oil.

Servicing of DG set of Engine Greaves/Kirloskar/Cummins/Mahindra of 160 KVA checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, toping up level the existing engine oil, coolant top up and in replacement, supplying & fixing of following spares :- (i) service kit for elements of fuel filter, Air filter, Lub filter one set each (ii) top up of coolant in radiator (iii) Testing of engine control panel (iv) Cleaning of radiator, minor repair of leakages to be rectified. (v) hose pipe set (vi) fuel pipe/lubricant pipe (vii) Engine oil.

Servicing Charges for Carrying out the 'B' Check maint from authorised rep or service engineer from the manufacturer of DG set of Engine Greaves/Kirloskar/Cummins/Mahindra of 62.5/63 KVA checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, toping up level the existing engine oil, coolant top up and in replacement, supplying & fixing of following spares :- (i) service kit for elements of fuel filter, Air filter, Lub filter one set each (ii) top up of coolant in radiator (iii) Testing of engine control panel (iv) Cleaning of radiator, minor repair of leakages to be rectified. (v) hose pipe set (vi) fuel pipe/lubricant pipe (vii) Engine oil.

Servicing of DG set of Engine Greaves/Kirloskar/Cummins/Mahindra of 25/30 KVA checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters, checking inlet & Exhaust manifold capscrews, checking of fan hub & water pump, toping up level the existing engine oil, coolant top up and in replacement, supplying & fixing of following spares :- (i) Fuel/ lub filter one set (ii) Coolent in radiator (iii) Testing of engine control panel (iv) Cleaning of radiator, minor repair of leakages to be rectified. (v) Hose pipe set (vi) Fuel pipe/lubricant pipe (vii) Engine oil.

Dismantling the defective alternator / field winding of any capacity from the existing foundation and from Engine after removing all electrical connections, transporting to approved / authorised / direct workshop, opening and taking out burnt winding, cleaning the stator assy rewinding with super enameled copper wire as per existing gauge as per original manufacturer and applying insulating varnishing of ‘F’ class, baking in oven re-assembling the alternator, transporting back to site re-installing the same position, carrying out alignment of complete DG set connecting up all electrical connections testing and commissioning complete all as specified. NOTE : - (a) Rate quoted shall be deemed to be inclusive of making good the disturbed surfaces. (b) The DG set shall be tested on load as per rated capacity for the satisfaction of Engineer- in- Charge to achieve designed parameters.

Supply and connecting battery lead (not less than 1.00 m long each) made out of PVC Insulated Plain/Striped Automobile Cables with high conductivity bright annealed copper conductor bunched together, insulated with dielectric grade PVC compound (impervious to oils, greases, acids, petrol and water) conforming to IS 2465 of size 25 sqmm soldered one end with copper/brass connector with nuts and bolts for battery pole and the other with copper lug for self starter terminal including taking down of existing unserviceable battery lead with connector and lug of any description complete all as specified and directed by Engineer-in-Charge.

S&F in repair door hinges for canopy of any capacity of DG set door including nut, bolt, drilling of hole, welding complete all as specified and directed.

Dismantling the unserviceable Dynamo / Alternators 12/24 volts and rewinding with ‘F’ class copper wire of 22 /existing gauge including dismantling the old coil, cleaning thoroughly and winding with super enamelled copper cord of existing size and gauge, varnishing, drying etc and re fixing with dynamo/alternator properly including testing on completion complete all as specified.

Dismantling the defective Dynamo /Alternators 12/24 volts and necessary repair with replacement of defective spares such as, carbon brushes, carbon spring, bearing, bushes, defective wiring, and soldering after re-fixing at site complete all as specified and directed.

S&F in repair maintenance free battery 12V, 180 AH for DG set including initial filling & Charging complete all as specified and directed by Engineer-in-Charge.

Scrapping the old paint from the DG set of 20 KVA to 160 KVA capacity, applying one coat of synthetic enamel paint of approved make by using spray gun, writing of SM/MES No at easily visible manner complete all as specified and directed

S&F in repairs self starter push button / or with Key arrangement for DG starting suitable for Kirloskar / Cummins DG sets complete all as specified and directed

S&F in repairs micro processor based DG control unit suitable for 20 to 160 KVA Capacity as per existing make of DG sets including neccessary connections and testing complete all as specified and directed

Supply & filling of distilled water in the DG set battery complete all as specified and directed

bharat contrectors (BID ID -3503222)

Esha Engineers (BID ID -3495709)

R D Bansal (BID ID -3503624)

u and v engineers and consultants (BID ID -3495844)

M/S Sonu Traders (BID ID -3493535)

The Rahul Vig (BID ID -3503761)

laxmi enterprises (BID ID -3494949)