ET-105

Amount

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Taking out C.I cover with frame from R.C.C Top slab of inspection chambers of various sizes including demolishing of R.C.C work manually / by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Edging with Common burnt clay F.P.S. (non modular) bricks of class designation 7.5, bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m

Cutting of roots under floors including cutting, excavation and refilling of earth after cutting of roots and disposing the debris at a lead of 10 mtr as directed by EIC.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and laying rubber moulded chequered / patterned tiles 300 X 300 mm X 30 mm thick of approved make including levelling, curing, finisihing and cleaning etc. complete to obtain required finish complete on 20 mm thick bed of cement mortar 1:4 (using crushed sand) as per specifications and drawings complete as directed by the Engineer-in-charge

Supply & Installation of vinyl printed name borad on 3mm ACP sheet board of size 6" x 4" and fixing the board in steel frame as per directions of EIC. The text/ matter will be given by the Dept.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Disposing off surplus earth / building debris/ concrete or stone debris in contractor’s own lorries at MCH approved dumping yard at contractor’s risk and cost including transportation loading and unloading, tools & plants etc., beyond 50 m initial lead, for all leads including all lifts involved, all as per specifications and directions of Engineer-in-Charge. Note : The quantity loaded in the truck shall be reduced by 30% for debris towards voids for payment purpose.

Provding and constructing brick work in 1:4 Cement mortar using crushed sandand standard bricks of approved class/ quality, make or brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-in-charge

Raising height of Manholes with PCC of grade 1:1.5:3 upto 0.30 mtr and fixing of CI covers (CI covers will be supplied by Dept. at free of cost) including shuttering, labour, tools and tackels as per directions of EIC

Providing 20 mm thick Internal plastering in C.M without cement punning 1:4 (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Note-1: General Notes 1.On their own interest, contractors are advised to inspect the site with prior permission before quoting their rates. 2. All the samples of materials which are to be used shall be approved by the department in advance. 3. The contractor shall comply with the provision of the Payment of Wages act 4. Rates quoted shall be inclusive of all cost of materials, labour, carriage, taxes, GST, labourcess, water charges, elctricity charges, signorage charges, wastages etc.. 5. Rates quoted shall be excluding the amount of EPFO and ESIC contributions. EPFO and ESIC contributions are reimbursable on production of valid proof of payment made by the contractor as per CPWD norms. 6. The parking bays for carrying out the work shall be released in a phased manner in order to cater the parking needs.

SRI BALAJI CONSULTANCY SERVICES (BID ID -3170297)