Ceiling and paneling work of Mallapplly Taluk office first floor conference hall

Amount

Appendix A -Civil works

50.12.4.1 : Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)

od76715/2019_2020 : Providing Aluminium frame work for ceiling with PVC sheet (hollow section) 7.5mm fixed to the frame work using 1.5x1.5 aluminium hollow section 60cm c/c distance fixed to the wall using 50x6mm fibre plug and 25mm steel screws using 22x14x12mm aluminium channel for longitudinal direction at a distance of 90cm c/cceiling suspended from roof by using GI hanger at 1.00mt c/c distance etc including cost and conveyance all material and labour charges etc complete

21.1.1.1 : For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

od76759/2019_2020 : Providing and fixing aluminium partition wall with 63.5x38.1x1.95mm powder coated aluminium sections , paneling with 12mm thick prelaminated sheet and 5.5mm float glass panes, including cleat angle ,aluminium snap beading , stainless steel screws all complete as per the direction of departmental officers. <br><br>The specifications of materials to be used for this work are as noted : <br>a) Aluminium T or L Sections with Powder coating of 50 microns (b) Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick (c) Float glass sheet of nominlal thickness 5.5 mm (of weight not less than 13.50 Kg/ sqm) (d) Neoprene / EPDM rubber gasket and sundries .<br><br>The minimum quantities of each material to be used for this work should be as noted below :-<br><br>Details of materials required to be provided for 2.00x2.10=4.20sqm should no be less than the quantities noted below- <br>1)Quantity of Aluminium section 63.5x38.1x1.95 mm –powder coated <br>H-3x2.10=4.30,V-3x2.00=6.00<br>Total=10.20+5% [email protected]/m=11.67kg<br>Al. Snap beading on both side<br>H-2x4x2.10=16.80,V-2x4x2.00=16 Total =32.8 m + 5% wastage 1.64 = 34.44 m @ 0.176 = 6.06 kg<br>Angle cleat 38 x 38 x 4.8 mm 50 mm long<br>12 x 0.05 = 0.6 m + 5% wastage 0.03 = 0.63 @0.985 kg/m = 0.62 kg<br>sub total 11.67 + 6.06 + 0.62 = 18.35 kg<br><br>2) Quantity of Pre Laminated Particle board 12mm th-2.00x1.2x.87=2.08m2+5%wastage 0.10=2.18m2<br><br>3) Quantity of 5.5mm thick Float glass-2.0x0.9=1.8+5%wastage0.09=1.89m2<br><br>4) Quantity of Neoprene / EPDM rubber gasket =16.4 metres etc<br><br>

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

od76929/2019_2020 : coolie

KURUVILA K M

Bidder Name

PHILIP THOMAS

KURUVILA K M