Supply, installation Submersible Pump, HSCF Pump from Different Water Works at Viramgam Nagarpalika

Name of Work :Supply, installation Submersible Pump, HSCF Pump from Different Water Works at Viramgam

Memorandum showing items works to be carried out :

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

Auto transformer starter suitable for local & remote pump control

application consisting of Auto Transformer (vacuum impregnated, air

cooled having three (3) tappings at 50%, 65% and 80%), incomer Rupees Forty Six

MCCB / MPCB, overload relay and contactors as per Type II Thousand Two

coordination including digital MFM with RS 485 communication port, Hundred Thirty

analogue type ammeter with selector switch, run hour meter, Eight Only

required protective relays & control accessories. (E) A. T. S. from

PVC insulated flat / round submersible copper cables (Rates exclusive

of GST) PVC insulated flat submersible cable as per detailed technical

2 500.00 459.00 Hundred Fifty R.Mt

specifications of R/C of GWSSB conforming to IS 694, IEC 60227 /

HSCF Pumps : Supply, installation, testing & commissioning of

horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified

capacity, horizontal foot mounted TEFC squirrel cage induction motor

(with minimum IE-3 efficiency class), working on three phase AC

3 4.00 supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along 301734.62 Set

with fabricated MS base frame, coupling, coupling guard, foundation

bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M,

Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS

Mechanical Seal (Above 30 kW), Base Frame: MS. (A) 50 HP ( 1 KW

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

HSCF Pumps : Supply, installation, testing & commissioning of

horizontal split casing centrifugal pump motor set of specified duty

parameters & guaranteed efficiency of following MOC with specified

capacity, horizontal foot mounted TEFC squirrel cage induction motor Rupees One

(with minimum IE-3 efficiency class), working on three phase AC Lakh Eighty

4 2.00 supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along 180532.00 Thousand Five Set

with fabricated MS base frame, coupling, coupling guard, foundation Hundred Thirty

bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Two Only

Casing: Cast Steel WCB , Shaft: SS 410, Shaft Sleeve: SS

Mechanical Seal (Above 30 kW), Base Frame: MS. (A) 30 HP ( 1 KW

DI Pipe : Providing and supplying D. I. K- 7 pipes for following nominal

bore diameter with internal cement mortar lining including all taxes,

5 55.00 insurance, transportation, freight charges, octroi, inspection charges, 1880.00 R.Mt

loading, unloading, conveyance to departmental stores, stacking etc.

complete. (IS 8329-2000). (A) 200mm Dia

DI Pipe : Providing and supplying D. I. K- 7 pipes for following nominal Rupees One

bore diameter with internal cement mortar lining including all taxes, Thousand Four

6 55.00 insurance, transportation, freight charges, octroi, inspection charges, 1477.00 Hundred R.Mt

loading, unloading, conveyance to departmental stores, stacking etc. Seventy Seven

complete. (IS 8329-2000). (A) 150mm Dia Only

L,L & J of DI/CI Pipe (tyton Joint) : Lowering , laying and Jointing C.I. S

& S Spun pipes suitable for Tyton joints / Mortar Lined D.I. Pipes of

Various classes with CI/MS specials of following diameter in proper

7 55.00 113.85 Thirteen and R.Mt

position, grade and alignment as directed by Engineer in Charge

Paise Eighty Five

including lowering laying hydrulic testing etc. Completed. (A) 200mm

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

L,L & J of DI/CI Pipe (tyton Joint) : Lowering , laying and Jointing C.I. S

& S Spun pipes suitable for Tyton joints / Mortar Lined D.I. Pipes of

Various classes with CI/MS specials of following diameter in proper

8 55.00 87.40 Seven and Paise R.Mt

position, grade and alignment as directed by Engineer in Charge

including lowering laying hydrulic testing etc. Completed. (A) 150mm

L,L & J of DI/CI Pipe (Flanged Joint ) : Providing and Making flanged Rupees Nine

joints to flanged DI/ CI pipes of all classes/ Specials etc. Including cost Hundred Sixty

of all Jointing materials rubber packing, nut bolts, inclduing lowering Two and Paise

laying jointing labour hydraolic testing etc. Complted. (A) 200mm Dia Fifty Five Only

L,L & J of DI/CI Pipe (Flanged Joint ) : Providing and Making flanged Rupees Seven

joints to flanged DI/ CI pipes of all classes/ Specials etc. Including cost Hundred Two

of all Jointing materials rubber packing, nut bolts, inclduing lowering and Paise Sixty

laying jointing labour hydraolic testing etc. Complted. (A) 150mm Dia Five Only

C.I. Specials plain ended : Manufacture, Supply and delivery of 80mm

to 700mm dia cast iron plain ended Speciels complete as per IS 5531-

1977 (Part- I to III) or its latest revision if any suitable for use with A.C.

pressure pipes manufactured as per IS 1592-1989 or its latest revision

11 450.00 for various dia meter and Classes, The delivery of Specials is to be 58.00 Nos

made to GWSSB stone or sites any where in Gujarat states including

all taxes, loading carting, unloading, stacking insurance, octroi,

inspection charges etc. Completed All Type of Specials such as Bends,

Tree Reducers etc. Class 5 & 10 up to 300mm Dia

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

C.I. Specials Flange ended : Manufacture ,supply and delivery of

80mm to 700mm dia cast iron flange ended specials completed as per

IS: 5531-1977 (part - I to III) or its latest revision if any suitable for use

with A.C. Pressure pipes manufactured as per IS : 1592-1989 or its Rupees Fifty

latest revison for various dia meter and classes, the delivery of Eight Only

specials is to be made to GWSSB store or sites any where in Gujarat

states including all taxes, loading ,carting, unloading ,stacking

insurance, octroi, inspection charges etc. Complete 80 to 300mm dia

Reflux Valves : Providingand Supplying ISI Mark CI/D/F Reflux Valves

as per IS:5312 (Lalest Edition) of following class and diameter Rupees Eight

including all taxes, insurance, transportation, freight charge, octroi, Thousand

inspection charge loading, unloading conveyance to departmental Twenty Seven

stores ,stacking etc. completed. Reflux valves PN 1.0 IS 5312 with ISI Only

mark. (A) 150mm Dia

Reflux Valves : Providingand Supplying ISI Mark CI/D/F Reflux Valves

as per IS:5312 (Lalest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charge, octroi,

14 7.00 15929.00 Hundred Nos

inspection charge loading, unloading conveyance to departmental

stores ,stacking etc. completed. Reflux valves PN 1.0 IS 5312 with ISI

mark.(A) 200mm Dia

Sluice Valves : Providing and Supplying ISI Mark CI D/F Sluice Valves

As Per IS: 14846 (Latest Edition) of Following class and Diameter Rupees Five

including all taxes, insurance , transporation, freight charges, octroi, Thousand Eight

inspection charges, loading, unloading conveyance to departmental Hundred Forty

store, station etdc .completed. PN-1 With hand wheel / cap operated Eight Only

(PD Type Short Body) (A) 150mm

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

Sluice Valves : Providing and Supplying ISI Mark CI D/F Sluice Valves

As Per IS: 14846 (Latest Edition) of Following class and Diameter Rupees Nine

including all taxes, insurance , transporation, freight charges, octroi, Thousand Eight

inspection charges, loading, unloading conveyance to departmental Hundred

store, station etdc .completed. PN-1 With hand wheel / cap operated Thirteen Only

(PD Type Short Body) (A) 200mm

Rubber Rings for AC Pipes/ CID Joints : Manufacturing , Supplying &

Delivery of EPDM Rubber Sealing Ring with ISI Mark as per Type -3

Secified in Table - I ^ II of IS specification 5382-1985 and IS 10292-

1982 (Part I & II) orits latest revision of any suitable for use with A.C. Rupees Forty

Coupler or CID Joint for A.C .PressurePipe (IS 1592-1989) Including all Two Only

taxes loading , carting ,unloading and stacking at GWSSB store any

where in gujarat state including insurance, inspection charges , octroi

etc. Completed. "O" Types rings (a) 150mm

Rubber Rings for AC Pipes/ CID Joints : Manufacturing , Supplying &

Delivery of EPDM Rubber Sealing Ring with ISI Mark as per Type -3

Secified in Table - I ^ II of IS specification 5382-1985 and IS 10292-

1982 (Part I & II) orits latest revision of any suitable for use with A.C. Rupees Sixty

Coupler or CID Joint for A.C .PressurePipe (IS 1592-1989) Including all Only

taxes loading , carting ,unloading and stacking at GWSSB store any

where in gujarat state including insurance, inspection charges , octroi

etc. Completed. "O" Types rings (a) 200mm

L,L & J of SV/AV/BFV/RV Lowering , Laying and Jointing in Position

following C.I./ D.F Reflux Valves Buterfly valves, sluice valves and air

19 5.00 valves including cost of all labour, jointing material including nut bolts 672.75 Nos

and giving satisfacory hydraulic testing etc . completed. Sluice Valves,

Butterfly valves, Reflux Valves (a) 150mm

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

L,L & J of SV/AV/BFV/RV Lowering , Laying and Jointing in Position

following C.I./ D.F Reflux Valves Buterfly valves, sluice valves and air

20 7.00 valves including cost of all labour, jointing material including nut bolts 853.30 Nos

Three and Paise

and giving satisfacory hydraulic testing etc . completed. Sluice Valves,

Butterfly valves, Reflux Valves (a) 200mm

MS Pipe : Manufacture, Supply & Delivery of Electric Resistance

Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil conforming to IS-3589-

2001 or its latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in Gujarat State

including all taxes, insurance, transportation, freight charges, octroi,

21 110.00 inspection charges, loading, unloading conveyance to Departmental 1550.00 R.Mt

stores, stacking etc. all complete. (Rate for MS Pipe based on the ex.

works price of HR Coil as Rs.58500 per MT - withouth GST (Above

mm to 10 mm) & Rs. 59000.00 per MT without GST (Above 10 mm) as

onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) 1.1 B I/S epoxy

Painting (100 Micron) & O/S Gunniting (25 mm Thick) (A) 168.3 -

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

MS Pipe : Manufacture, Supply & Delivery of Electric Resistance

Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil conforming to IS-3589-

2001 or its latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in Gujarat State

including all taxes, insurance, transportation, freight charges, octroi,

22 110.00 inspection charges, loading, unloading conveyance to Departmental 2023.00 R.Mt

stores, stacking etc. all complete. (Rate for MS Pipe based on the ex.

works price of HR Coil as Rs.58500 per MT - withouth GST (Above

mm to 10 mm) & Rs. 59000.00 per MT without GST (Above 10 mm) as

onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) 1.1 B I/S epoxy

Painting (100 Micron) & O/S Gunniting (25 mm Thick) (A) 219.1 -

L,L, & J of MS Pipe (Out Side gunniting & Inside lining / epoxy)

Lowering , laying, joiting & Welding in position to correct line & Level

M.S. Pipe with Outer gunniting & Inside lining /Epoxy painting on Rupees Two

23 95.00 pedestal or Chairs Up on prepared formation or prepared bedding in 207.00 Hundred Seven R.Mt

trenches the rates including conveyance from store to side of work Only

loading, unloading joint plastering hydrotesting etc .completed.

L,L, & J of MS Pipe (Out Side gunniting & Inside lining / epoxy)

Lowering , laying, joiting & Welding in position to correct line & Level

M.S. Pipe with Outer gunniting & Inside lining /Epoxy painting on

24 95.00 pedestal or Chairs Up on prepared formation or prepared bedding in 248.40 R.Mt

Eight and Paise

trenches the rates including conveyance from store to side of work

loading, unloading joint plastering hydrotesting etc .completed.

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

Supply, installation, testing, and commissioning of a 50 HP (37 kW)

three-phase, water-filled, rewindable borewell submersible motor

and pump set. The unit must feature a corrosion-resistant AISI

Stainless Steel body and be suitable for a 200 mm to 250 mm bore

size. Designed for a head range of 40 m to 188 m and a flow rate of up

to 3150 LPM. The motor must operate within a voltage range of

25 3.00 120000.00 Lakh Twenty Each

350V–440V at 50 Hz ,Polywrap pure electro-grade copper windings

for heat resistance , Nitrile rubber (NBR) bushes and wear rings to

ensure long life even in sandy water environments., CED-coated cast

iron components for rust-free operation and non-overloading power

characteristics Must be ISI marked and conform to IS: 8034 standards

Completed as per Instruction Engineer In Charge .

Estimated amount Estimated amount

Put to tender Rs … Put to tender Rs…

Deduct .............% below Rs………… Add............% above Rs……………

Total Rs………… Total Rs……………

(*Please strike out whichever is not applicable).

Note : 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\Wv! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0JLhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note : 2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under this signature.

GM\W o Z VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJLP

Note : 3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site,

moisture, weather etc.

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

Item QuantitiesE Item Of Work Tendered In Words Unit Total Amount

No. stimated Rate according to

બાબત Qty. કામ ની બાબત In Figure estimated

GM\Wv# o 8F\S[,F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[fNZ[S ZLT[ ;FO;}OL SZJFGM\ ;DFJ[X YFI K[4 VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[ C[9/ SFD VD,DF\ ZC[X[P

Note : 4 To be continued on additional sheets, if found necessary.

GM\Wv$ o H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

Viramgam Nagarpalika