REPAIR TO INTERNAL ROAD OF AD WKSP AND PATH ALONG THE ROAD AT MAP ACCN AT DHOLEWAL UNDER GE LUDHIANA

Amount

Repairs to pot holes of any depth, area not exc 1.00Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads. Path etc, cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings all as specidied and directed.

M&L for preparing existing black top surfaces with wire brushes for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen (VG - 30) at the rate of 5 Kgs per 10 Sqm of road surfaces all as specified and directed.

M&L for premixed bituminius macadam with paving bitumen(Consolidated thickness 75mm or less) laid/rolled and compacted to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 30 mm thickness using machanicle paver with 5.5% binder content (paving bitumen (VG - 30) by weight of total mix, rolled and compacted to required camber and gradient per 10 Sqm rolling consolidating to achieve uniform, smooth surface with 8 to 12 tonne power roller as required gradient and camber all as specidied and directed.

M&L for providing and marking broken/continous central/end line on the road pavement and the like of description and width using hot applied thermoplastic compound 2.50mm thick (excluding thickness of glass beads) and providing reflective glass beads @ 250 gm per SQM as per IRC-135, confirming to MORTH complete all as specified.

S&F in repairs Road Studs/Cat eye the body of stud is made of ABS material two reflectors are fitted in the body. The road stud is dynamically designed so that it can bear load upto 25 Tons and its impact strength is about 230 KN weight of stud is 130 gms. Body colour Yellow with swareflex beads of size 100mm X 19mm. fixed on roads by nail at intervals as directed by engineer -in-charge.

Demolition of brickwork built in cement or cement lime mortar incl all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.

M&L for PCC Cement concrete Type D-2, (1:4:8 )mix using 40mm graded stone aggregae as in foundation fillings, mass concrete complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor all as specified.

M&L for 80 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.

M&L for Sand filling under interlocking tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

M&L for bricks work with sub class B brick straight or covered on plain exc 6m means radious built in CM 1:6 complete all as specified.

M&L for 15mm thick cement plaster on fair face of brick work in CM 1:4 finished even and fair, complete all as specified.

M&L for preparation of Newly plastered surfaces and applying three coats of White Wash on plastered surfaces of walls etc. Complete all as specified and directed by Engineer-in-charge.

Kissan contractor and engg works

PK ENTERPRISES

M/s Bansi Lal

M/s Shri Krishna Enterprises

M/s Surjit Singh and bros

S S BUILDERS

B.L. Chaudhri and Co.