Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4.9 L
Closing Date
10 Aug 2026, 9:30 pm
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
08022265383
Providing additional infrastructure works at road no. 4, 5A, 9, 17, 8 & 23 to 27 of Doddaballapura - Devanahalli General Industrial Area (ITIR), Bengaluru Rural District.
KIADB/2026-27/EL/WORK_INDENT489
KIADB/2026-27/EL/WORK_INDENT489
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Satisfactory completed (at least 90% of the contract value), as a prime contractor, at least One Similar Work such as Providing infrastructure works, to an extent of not less than 50% of the amount put to tender (i.e., Rs.162.25 lakhs)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11kV 3Cx400sqmm XLPE HTUG cable: 2.08 Km, (2) Compact RMU- 1 way/3way/5way: 11 Nos, (3) 11kV/433V 250KVA DTC: 6 Nos
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 06 Months
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Achieved in at least two financial years a minimum financial turnover of Rs.649.00 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.97.35 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
₹5,000
₹4.9 L
29 Jul 2026
29 Jul 2026
11 Aug 2026
4 Aug 2026
4 Aug 2026
Providing additional infrastructure works at road no. 4, 5A, 9, 17, 8 & 23 to 27 of Doddaballapura - Devanahalli General Industrial Area (ITIR), Bengaluru Rural District.
Providing DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL at tapping point (Including Cost of Poles) with all lead and lifts complete as per specifications and directions of engineer in charge
Erection of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL at tapping point (Including Cost of Poles) with all lead and lifts complete as per specifications and directions of engineer in charge
Supplying of 11kV, 3 Core HTUG XLPE Insulated Cables as per IS-7098 (Part-2) 2011 with following parameters & as per BESCOM Requirements: (1) Insulation manufactured through Dry Cure, Triple Extrusion...
Supplying of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3Cx400sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx400sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable with Cu lugs and Al ferrule with all lead and lifts complete as per specifications and directions of e...
Supply of artificial manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of cable covering tiles 250x125x40mm or 125x125x40mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of 150mm dia GI pipe for drain crossing and cable raising with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of UG cable by Trench less technology (HDD) by adopting horizontal boring and drawing of cables including preparation at site with all lead and lifts complete as per specifications and directio...
Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Cable trench excavation in ordinary soil with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of cable in Existing Trench/GI pipe/StoneWare/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff with all lead and lifts complete as per specifications and direct...
Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Covering the cable with tiles with all lead and lifts complete as per specifications and directions of engineer in charge.
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type cable terminations with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable straight through joint with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts complete ...
Laying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 5 Way ...
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 3 Way ...
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 1 OD f...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required with all lead and lifts complete as per specifications and directions of engineer in cha...
Earth Excavation for RMU Foundation Depositing of earth on Bank with all lead and lifts complete as per specifications and directions of engineer in charge.
Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge. at S/s, DTC's, OD...
Providing Reinforcement Fe 550/550 D with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required including two coats of approve...
Supplying & fixing M.S rectangular angle of size 65x65x6mm fixed in cement concrete 1:2:4 with 2 numbers of 25cm including cost of all materiasl, bending, cutting and scafolding whrerever necessary. N...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,with all lead and lifts complete as per sp...
Supply of Distribution Transformer - 3 Phase, 11kV/ 433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 with the following Parameters:
(1) Core shall be of higher grade CRGO Steel sheet of...
Supply of Caution/Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Heavy Duty Long Barrel Copper Lug-240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT Wiring Al Lead Wire - 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/ panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50Hz AC with latest microcontroller based, digital readout of percentage leakage curren...
Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of MCCB 250 Amps with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat...... With bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supply of LT Feeder Piller Box (MS & Thermoset Plastic) 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar with all lead and lifts complete as per spec...
Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all lead and lifts complete as per specifications and directions of engineer i...
Erection of LT Feeder piller box (MS & Thermoset Plastic Enclosure) including termination, wiring & connection of cables with all lead and lifts complete as per specifications and directions of engine...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ITIR Bid document.pdf
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].