HEDPE PIPE

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting nut, construction of shoring and bracing, removal of stumpe and other deleterious material and disposal upto a lead of 50 m. dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH By Mechanical means

By Manual means for Interconnections

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and 2 scaffolding wherever necessary, sorting the dismantled maternal, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD/MORTH

Collection supply and filling of Stone Crusher Dust less than 3mm and fines not more than 3 10% including cost and conveyance of all materials labour charges watering and compacting etc., complete as per SS.under Bed Concrete

Manufacture, supply, & delivery of HDPE pipes conforming to IS 4984-1995 including 4 transportation to any where in A.P, including excise duty, sales tax etc., complete. (PE-100 Grade) 110mm Dia 6.0 kg/sqcm

Laying and jointing of HDPE pipes by butt fusion welding as per IS: 11/7634 as amended 5 from timelta time to the alignment and gradient and testing the pipeling to the required pressure. (PE-100 Grade) OD 110 mm 6.0 kg/sqem 110mm Dia 6,0 kg/sqcm

Manufacture, Supply, & Delivery of HDPE (PE 100 bhadej fittings conforming to 18-4984-1995 including transportation to anywhere in A,PeExcluding all toxes, MS flanges OD 110mm

Collars OD 110mm

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm 6 mm thick)

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance 8 etc..complete. (1/2" to 1")

Supply and delivery of PN 1.6 Bar "Resilient seated soft sealing Gate valves (Sluice valves) with body & bonnet of Ductile Iron GGG-40/SG 400/15 or-50SG-500/7 or equivalent as per 1.S.1865, 18 3896-2 & wedge fully rubber lined with food grade quality grade W270 Grade EPDM, Replaceable Spindle and Nut without gland packing with 3-0 ring protection system on the shaft and seals of NBR. The valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS 5163 type A/IS 14846. All the valves should be with fusion bonded Electrostatic powder coating both inside and outside pocket (Min 250 microns) RAL 5005 with pocket less straight through body passage conforming to design standards of DIN 3202 F4 BS 5163 Type A flange drilling as per IS:1538 including transportation complete. (Makes: AVK/VAG/DURGA/ IVC (or) approved make by department authorities and with Necessary Cap, Extension rods as per site requirements) 100mm Dia MAT-08069

Labour charges for lowering and keeping in position 100 mm dia C.1./DI Sluice valves(with 10 cap/with hand wheel), reflux valves and scour valves, including cost of jointing materials such as nuts & bolts, rubber insertion sluice valves and tail pieces. 100mm Dia PN 1.6 (MPa)

Bailing out water from the trenches with oil engine driven pump sets, including hire charges, 11 fuel charges and wages for Driver and Helper etc., complete as per directions of the departmental authorities

Engaging of Skilled & Unskilled Labour for Interconnections from HDPE to PVC/GI Pipelines as per SOR 2024-25 Fitter