Routine / Corrective maintenance to Snow Cat 90HP MK pertaining to Mechanical and Hospital Sub-Division 1st Baramulla

Preventive maintenance by way of carrying out following jobs: 1.Providing & Filling of M-Oil 15W40 (12 Ltrs@380/ltr)= 4560 2.Providing and filling of Gear Oil 75W 90 (20 Ltrs@600/ltr)= 12000 3.Providing and filling of Hydraulic Oil (10W) (5 Ltrs@400/ltr)=2000 4.Providing and filling of Coolant(Antifreeze) (3 Ltrs@350/ltr)= 1050 5.Providing and filling of TQ Oil (2 Ltrs@450/ltr)= 900 6.Providing & Fitting of M-oil Filter (01No @ 720)= 720 7.Providing & Fitting of Diesel Filter (01 Set @1050)= 1050 8.Hydraulic oil filter = (01 No @1550)= 1550 9.Transmission oil/Strainer filter (01 No @850)= 850 10.Providing & Fitting of Air Filter assy (01 Set@1900) =1900

Repairs to electrical system by way of replacement of damaged fuses, switches and replacement of damaged wiring by way of engaging expert automobile electrician and p/f and fitting of LED fog lamps (06 no's), cabin light (o1 no), and replacement of damaged wiring, Fuses, Starting Relay (01 No.) and P/f of new Horn (01 No), front work LED LH/RH (04 No), Tail Light assly (02 Nos), Wiper Arm with Blades (01 Set), Headlight assy (02 assy) complete in all respects. The job also includes Providing and fitting of 12V emergency Siren provision with allied accessories including wiring, fuses and Toggle switch. The Job further includes P/F of Multi-point mobile charger 12V Multiple charging strands (C, B, D etc) of Reputed make.

Supply, installation, testing and commissioning (SITC) of a new genuine/OEM hydraulic pump assembly suitable for Farmtrac FT-90 (90 HP) tractor (Pump body shall be manufactured from high-grade cast iron or equivalent material with precision-machined internal components. Bearings, gears/rotors and shaft seals shall be factory assembled and tested), including dismantling and removal of the defective hydraulic pump, cleaning of the hydraulic system, inspection of suction strainer, pipes and hoses, replacement of all required seals, O-rings, gaskets and mounting hardware, installation of the new hydraulic pump, alignment and tightening as per manufacturer's specifications, topping up/replacement of hydraulic oil as required, bleeding of the hydraulic circuit, calibration of hydraulic pressure, functional testing of the hydraulic lift and remote hydraulic system, rectification of minor leaks, road/field testing, and commissioning complete in all respects. The Job also Includes complete flushing of Hydraulic system and then refilling of new Hydraulic oil conforming to OEM recommended Grade) and testing Thereof

Modification to the fuel tanks of the snow cats by way of increasing the fuel capacity from 90lts to 160 lts. The Job includes providing, & fitting of 160 lts fuel tank replacing the already existing 90 lt tank. The job includes fabrication and errection of housing frame out of MS angle/flat by way of welding along with supports to the new fuel tank wherever necessary. The job includes providing and fitting of diesel pipe line wire braided (i.e. supply and return line with all fitments appx length 15feets). The job also includes complete testing and commissioning of newly installed fuel tank. (The job may be required for machines deployed for snow clearance operation to far-flung areas where refilling of fuel at the designated fuel station is time consuming and un-economical).

Providing and fitting of new power steering cylinder-10070694AB by way of dismantling old power steering cylinder from prime mover using suitable tools and tackles and then fitting of new radiator assly and testing thereof.

Manufacturing and providing / fitting of Non-Skid Chains Compatible with Tyre of Size 12.2 x 24 fabricated out of EN-8 material alloy steel hardened having crossectional area 12mm x 8mm with proper/suitable locking arrangements one complete job.

Providing of 30 Ltr HSD @96.14/ltr= 2884.2 for Testing of machine and general checkup after completion of Job.