Repair to PWD Road to Jadipur in the District of Puri for the year 2025-26.

Cleaning and grubbing road land including uprooting rank vegetation grass bushes shrub, supplying & trees of girth upto 300mm removal of stumps of cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of a 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness etc. complete as per direction of Engineer-in-charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with PRR 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of H.G stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 404 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

WBM Gr-III

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H specifications including cost, conveyance, royalty, taxes, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and applying tack coat using bitumen @0.20 kg per sqm on the prepared granular surface / bitumenous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and laying semidense bituminouse concrete with batch type hot mix plant using crushed aggregates of specified grading , premixed with bituminouse binder of 60/70 penetration grade of bitumen, transporting the hot mix to site, lysing with a hydrostatic pavor finisher with sensore control to the required grade , level & allignment, rolling with smooth wheeled, vibratory & tendem rollers to achieve the desire compaction etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing & laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform & free from streaks & holes as per drawing and Technical Specifications of MoRT&H clause 803 and as per direction of Engineer-in-Charge.