Mukhyamantri Adimjuth Sarvangi Utkarsh Yojana (TASP-2025/26) Construction Of Various Road in Dharampur Taluka Dist. Valsad. Pakage DHR-TASP-16 (Total 2 Roads, 3.000Km) (1) Bhutrun to Joining Khoba Road. K.M. 0/00 to 2/000 (2) Khadki Main Road to Maharashtra Border Road K.M. 0/00 to 1/000 Tal. Dharampur. Dist. Valsad

Name of work: Mukhyamantri Adimjuth Sarvangi Utkarsh Yojana (TASP-

2025/26)Construction Of Various Road in Dharampur Taluka Dist. Valsad.

Pakage DHR-TASP-16 (Total 2 Roads, 3.000Km) (1) Bhutrun to Joining

Khoba Road. K.M. 0/00 to 2/000 (2) Khadki Main Road to Maharashtra

Border Road K.M. 0/00 to 1/000 Tal. Dharampur. Dist. Valsad

Memorandum showing items of works to be carried out

It. Quantities Item of work Estimated Unit Total Amount

It. Quantities Item of work Estimated Unit Total Amount

No. estimated but In figures according to

may be more or Rs. Ps. estimated

1 1.80 Hect. Clearing and grubbing road land including 34796.29 Hect.

uprooting rank vegetation, grass bushes, shrubs,

saplings and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of

unserviceable materials.(D) By mechanical

means in area of thorny jungle.

2 2700.00 Cu.mt. Earth work in cutting in all coats of soil and soft 104.04 Cu.mt.

murrum including conveying and putting the

stuff in spoil bank maintaining minimum

distance of five meter between top edge of

cutting and top of spoil bank.

3 45.00 Rmt Supplying and fixing reinforced concrete heavy 1952.00 Rmt

duty non-pressure pipes with collars for culverts

carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M.

1:2 watering and laying (to level or slopes) of

class NP3 of following internal daimeters.(iii)

4 1612.76 Cu.mt. Earthwork for embankment including breaking 169.44 Cu.mt.

clods, dressing with all lead and lift and

including watering rolling and consolidation of

subgrade in layers at O.M.C. to required dry

density including filling the depression which

occur during the process using power roller 8T

to 10T.(E) From Borrow area within 3.0KM.

5 360.00 Cu.mt. Supplying, Stacking and Spreading the Hard 936.31 Cu.mt.

Murrum including rolling and watering etc.

6 1998.30 Cu.mt. Construction of Granular Sub Base by providing 971.74 Cu.mt.

coarse graded machine crushed B. T. material

satisfying MOST Specification of Grading - I

using 53 mm to 26.5 mm @ 30% (M.C. Metal),

26.5 mm to 4.75 mm @ 60% (M.C.Metal),

mm below @ 10% (Stone Dust) including

spreading in uniform layer with motor grader on

prepared surface, mixing by mix in place method

with rotavator at OMC and compacting with

vibratory roller to achieve the desired density

with C.B.R. > 30% etc. complete.

7 1829.70 Cu.mt. Providing, laying, spreading and compacting 1060.52 Cu.mt.

graded stone aggregate to wet mix macadam

specification including premixing the Material

with water at OMC in mechanical mix plant

carriage of mixed Material by tipper to site,

laying in uniform layers with paver in sub- base /

base course on well prepared surface and

compacting with vibratory roller to achieve the

desired density.

8 847.40 M.Ton Providing and laying bituminous base course 2544.12 M.Ton

37.5mm thick compacted in one layer with tack

coat of asphalt Emulsion RS-1 at the rate of

Kg / 10 Sqmt. and using B.T. stone aggregate or

required gradation and asphalt (VG-30) grade

for mixing @ 1.99 % by weight of total mix for

mixing including heating the aggregate and

asphalt by drum mix plant and spreading the

same by paver finisher and consolidation with

vibratory roller including providing all meterials,

equipments, tools and plants, oil, kerosene, fire

wood, labour chrges etc. complete.

9 604.80 M.Ton Providing laying & rolling of 25 mm thick 3360.81 M.Ton

Open graded Premix bituminous carpet with

B.T. aggregate as specified and using RS1

Emulsion for tack coat at the rate of 2.5 kg/10

sq.mt. and using bitumen grade VG-30 for

Mixing with aggregate at the rate of 3.36 % i.e.

33.60 kg / M.T. of total mix including heating

and mixing in drum mix plant transporting and

spreading the same with paver finisher and

consolidation with vibratory roller including

necessary fire wood , oil , lubricant , labour

charges etc. using contractor's own drum mix

plant and equipment ,tool etc .complete in

accordance with the requirement of specification.

10 305.00 M.Ton Providing and laying seal coat with B.T. 3766.89 M.Ton

aggregate as specified using aggregate at the rate

of 0.18 Cu.mt./10 Sq. mt. and bitumen grade

VG-30 for mixing with aggregate at the rate of

4.5 % i.e. 45.00 Kg. / M.T. of total mix

including heating and mixing in drum mix plant

and transporting and spreading the same by

paver finisher and consolidation with vibratory

roller including necessary fire wood , oil

lubricant , labour charges using contractor's own

drum mix plant, machineries and equipment

tools etc. complete in accordance with the

requirement of specification

11 11298.00 Sq.mt. Providing and laying asphalt painting on B.T. 38.72 Sq.mt.

surface with bitumen VG-30 at rate 5.00Kg /

10Sq.mt. including spreading stone dust for

painting surface at rate of 0.03 cu.mt. / 10 sq.mt.

12 5.00 No. Providing and fixing ordinary kilometer stone of 704.33 No.

precast C.C. 1:2:4 including necessary

reinforcement as per I.R.C. type design in C.C.

1:4:8 including lettering and painting etc.

complete. (For OD.R. & V.R.)

13 12.00 No. Providing and fixing Hectometer stone as per 356.50 No.

I.R.C. type design including lettering and

painting etc. complete. (ii) Fixing in C.C. 1:5:10

14 4.00 No. Informatory sings: Providing and fixing sing 3856.90 No.

boards made out of 2mm aluminium sheet; size

80 x 60cms. rectangle as per the design of IRC-

67-1977 pre treated with phospheting process &

acid teching; coated with one coat of

epoxyprimer and two coats of best qualityepoxy

paint; reflectorised with retro refiective sheeting

as per latest M.O.S.T. Specifications; 3.1m long

stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy coatings

in black and whitebends. the details of symbol

for eachboard shall details of symbol for

eachboard shall be as per the instruction

ofengineer in charge. The fixing at site shall be

in 1:2:4 CC block of size 45 x45 x 60cms. for

each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)..

15 2.00 No. TASP/VKY Logo Board:- Providing and fixing 4545.00 No.

TASP/VKY Logo Board made out of 2mm

aluminium sheet, as per the drawing & design.

Pre treated with phospheting process and acid

etching coated with one coat of epoxy primer

and two coat of best quality epoxy paint,

refloctrorized with retro reflective sheeting as

per the latest M.O.S.T. specification, 3.1 Mt.

long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3 mm, 75 x

75 x 6 mm as required painted with best quality

epoxy coatings in black and white bends. The

details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC block of size 45 x

x 60 cms for each leg, including excavation

curing etc. complete under the supervision of

Engineer-In-Charge (A)Engineering grade.

16 4.00 No. Village name/ Bump Ahed sign :-Providing and 5045.36 No.

fixing sing boards made out of 2mm aluminium

sheet; size 90 x 60cms. rectangle as as per the

design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post

and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm painted with best quality

epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for

each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each

leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

17 45.30 Sq.mt. Road marking with hot applied thermoplastic 367.72 Sq.mt.

paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excludingof surface

applied glass beds as per IRC:35- 2015. The

finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white

color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service lifeduring the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-

15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

18 68.00 No Cat Eye / Road Stud / RPM: Supplying of 217.40 No

Molded Twin Shanks Raised Pavement Markers

made of polycarbonate and ABS moulded body

and reflective panels with micro prismatic lens

capable of providing total internal reflection of

the light entering the lens face and shall support

a load of 13635 kgs. tested in accordance to

ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 DO III Dt

11.06. 1997. The height, width and length shall

not exceed 20mm, 130 mm and 130 mm and

with minimum reflective area of 13 Sqcm on

each side and the slope to the base shall be 35 +/-

5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not

less than 19 +/- 2 mm and height not less than

30+/- 2 mm) from the body is to be a minimum

value of 500 Kgf. Fixing will be by drilling holes

on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as

per manufacturers recommendation and The

19 16.00 Nos Cautionary Warning sign :- Providing and fixing 3808.66 Nos

Cautionary Sign Board made out of 2mm

aluminium sheet, size 90 x 90 x 90 cms

equilateral triangle, as per the design of IRC-67-

1977. Pre treated with phospheting process and

acid etching coated with one coat of epoxy

primer and two coats of best quality epoxy paint,

refloctrorized with retro reflective sheeting as

per the latest M.O.S.T. specification, 3.1 Mt.

long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3 mm, 75 x

75 x 6 mm; painted with best quality epoxy

coating in black and white bends. The details of

symbol for each board shall be as per the

instruction of engineer in charge.The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60 cms for each leg, including excavation curing

etc. complete under the supervision of Engineer-

In-Charge (A) Engineering grade.

20 8.00 Nos Chevron sign :-Providing and fixing sign boards 3711.75 Nos

made out of 1.5mm aluminium sheet / 3mm ACP

(Aluminum composite Panel); size 60x50cm

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.3 mtr

long stand post of Iron Angle 75 x75 x 6mm /

65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle

of35x35x3mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board

shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original

21 31.00 Nos Regulatory/Mandatory signs :Providing and 3439.81 Nos

fixing sing boards made out of 2mm aluminium

sheet; size 60cms. diameter circle as per the

design of IRC-67-1977 pre treated with

phospheting process & acid eteching; coated

with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x

35 x 3mm 75x75x6mm as required; painted with

best quality epoxy coatings in black and white

bends. the details of symbol for each board shall

be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the

supervision of engineer in charge.(A)

Engineering grade.

22 6.00 No Hazard Marker Sign :-Providing and fixing sign 3518.69 No

boards made out of 2.0 mm aluminium sheet /

mm ACP (Aluminum composite Panel); size

90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black

and white bends. The details of symbol for each

board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under

the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

23 8.00 Nos STOP SIGN:-Providing and fixing sing boards 4676.06 Nos

made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process &

acid teching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per

latest M.O.S.T. Specifications; 3.1m long stand

post and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy

coatings in black and white bends. the details of

symbol for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing

tec. complete under the supervision of engineer

in charge.(A) Engineering grade.

24 111.00 Cu.Mt Excavation for foundation up to 1.5m depth 248.16 Cu.Mt

including sorting out and stacking of useful

material and disposing off the excavated stuff as

directed by Engineer in charge with all lead and

lift in (2) Dense or hard Soil.

25 9.90 Cu.Mt Providing & filling in foundation with ordinary 3240.34 Cu.Mt

cement concrete M 100 mix and providing

necessary vertical pin headers including

formwork vibrating ramming & curing complete.

26 90.30 Cu.Mt Providing & filling in foundation with ordinary 3610.39 Cu.Mt

cement concrete M 150 mix and providing

necessary vertical pin headers including

formwork vibrating ramming & curing complete.

27 22.50 Rmt Supplying fixing & joining reinforced concret 3446.50 Rmt

heavy duty non pressure pipe carrying indian

railway standard with collars for culverts carring

heavy traffic as per Indian railway standard

specification including setting and joining the

pipe in cement mortar 1:2 watering or laying (to

level and slope )of I.S.class NP-3 900mm dia

28 30.00 No. Providing and fixing Guard stone as per I.R.C. 349.11 No.

type design including white washing etc.

complete (II) Fixing in C.C. 1:5:10

29 3.00 No. Providing and fixing 20cm x 15cm x 2.5cm thick 279.69 No.

year plate of marble stone set in C.M. 1:4

including Finishing and engraving letters, etc.

30 112.26 Sq.mt. White washing with lime on wall surface (two 12.41 Sq.mt.

coats) to give an even shade including

thoroughly booming the surface to remove all

dirt, dust, mortar drops and other foreign matter.

Rs. One Corer Fifteen Lack Fourteen Thousand Four Hundred Sixty Seven and Paise Sixty Five Only.