Up-gradation of Transit Dispatch area in store building and allied civil works at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Up-gradation of Transit/ Dispatch area in store building and allied civil works at HAL Korwa.

NIT No.- HAL/KWD/Civil/16 of 25-26 Date: 07.08.2025

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 (Provisional certificate is acceptable) of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 Latest solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 Proof of GST registration

8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

9 Constitution and legal status.( Partnership/ Proprietary)

10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

12 Tenderers are required to attach Format of undertaking as per Annexure 1& 2

13 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Up gradation of Transit/ Dispatch area in Store building and allied civil works at HAL Korwa.

NIT No.- HAL/KWD/Civil/16 of 25-26

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

Part-A - Civil Items

1 Earthwork Excavation in foundation, trenches, column footing, drains, manholes, chambers or any description of similar types of excavation works in all soils except hard rock upto 1.50 mt. depth getting out, including dressing and levelling of trenches sides and also returning filling, dewatering if required etc., all complete as per drawing, specifications and direction of E.I.C. 19.00 Cum 220.77 4194.63

2 Providing mixing and placing Plain Cement Concrete : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C 2.00 Cum 5777.61 11555.22

3 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead all complete with labour, scaffolding, T&P etc all complete as per specification and direction of E.I.C 300.00 Kg 4.79 1437.00

4 Dismantling of Brick Works of any description and in any position including removal of debris at directed place,including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 6.00 Cum 1747.36 10484.16

5 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 20.00 Cum 7723.22 154464.40

6 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 174.00 Sqm 335.32 58345.68

7 Providing & laying heavy duty vitrified tiles of size 600x600mm thickness 15 mm of 1st quality on Pavement of approved shade & brand like Kajaria/ Johnson/ somany or other equivalent brand or as per manufacturer thickness etc, grouting of tiles with neat cement slurry and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/ hacking of surface with suitable tools also providing bedding layer 15 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 208.00 Sqm 2495.00 518960.00

8 Providing and laying 2 mm thick heavy duty homogeneous and flexible PVC flooring of approved make such as wonder floor/ Poly floor or as approved conforming to IS standards in roll form with suitable adhesive and joints thermo-welded to form seamless surface including cleaning and preparation of surface to receive the floor by removing including cost of all material, labour, wastages, T&P etc, complete all as required and directed by EIC. 208.00 Sqm 804.00 167232.00

9 Providing & Fixing of knauf Armstrong/ HI steel ceiling system make horizontal level suspended ceiling system complete comprising of GI Tegular Lay in standard perforated metal ceiling consisting of 600x600mm (Nominal size) lay in tiles of 120 grm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per IS:513 (1994) in Global white color with square Tegular edge having 8mm drop and 10mm flange. Tile shall have perforation having whole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively and a brother of 10mm. The difference between the 2 diagonal dimensions of the tile to be less than 1mm.tiles shall be flattened by precision leveller to minimize sag to less the 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns back side of the tile will have Soundex fleece hot pressed. 205.00 Sqm 2359.00 483595.00

10 Providing & applying approx. 1 mm thick wall care putty of make birla, berger , ACC or approved make with a coat of wall primer of approved brand to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 603.00 Sqm 132.35 79807.05

11 Providing and applying two coats of acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 603.00 Sqm 53.18 32067.54

12 Providing, fabricating, fixing and erection of MS Columns/beams comprising of angle channel/ I section for supporting super structure welded/ riveted including all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete, as per drawing, specification and direction of EIC. 8810.00 Kg 110.68 975090.80

13 Providing & laying Reinforced Cement Concrete 1:1.5:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in footing, plinth beams, colums, beams etc. including cost of all labour, material, T&P, mechanical mixture, platform, placing of concrete in position at any floor without disturbing reinforcement required and preparation of cement concrete by mechanical mixing in the form of volumetic mixing, curing and proper compaction by mechanical vibrators as required and also as per drawing, specification and direction of EIC. 7.00 Cum 8438.55 59069.85

14 Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallant or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 700.00 Kg 91.47 64029.00

15 Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete foundation footings, base of coloum and raft beams, side and soffit of foundation if any plinth beam and similar work faces of wall retaining wall all type of RCC work or any description of works, in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456-2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 50.00 Sqm 590.84 29542.00

16 Providing fabricating and fixing of powder coated aluminium partition of extruded section of approved brand such as Hindalco/ JINDAL etc. jointed with Aluminium angles, cleats with fins to match the section of the frame (All the aluminium section/ fittings are to be powder coated 50 micron minimum) including providing & fixing 4mm thick APP sheet in bottom portion (approx 0.90 m height) of approved shade and colour, of approved brand like alcon with the help of "U" channel/ suitable beading and 5 mm thick plain float glass of approved quality such as Modiguard/ Saint Gobain/ Triveni/ TATA at upper portion with snap fit aluminium beading, U-rubber all complete as per drawing and size of section will be 100x44x2mm and min 03-04 of horizontal members or as per site requirement with tolerance of +/- 5% or as per Manufacturers/ IS specifications and member will be fitted with 0.90 M approx.) C/C horizontally and vertically both ways or as per site requirement and also to accommodate the position of door / cabins /corners etc additional vertical /horizontal members if required is to be provided without any extra payment for the same, including all labour, material, T&P, transportation, wastage, necessary screws and dash fastener for fixing of frame and other required fixture for proper completion of work as per direction of E.I.C. (Tolerance of Aluminium members ± 5% or as per manufactures/IS specification in thickness) 163.00 Sqm 3660.00 596580.00

17 Providing, fabricating and fixing of powder coated aluminium hinged door partly glazed al. door of extruded sections of high strength and weight ratio (All the aluminium section are to be anodised for door shutter (All the aluminium section/ fittings are to be 50 micron Powder coating minimum). Vertical frame of 83 x 44 x 2 mm for style, Top & middle rail section 83 x 44 x 2 mm and bottom rail section of 114 x 44 x 2 mm (with tolerance ± 5%) and cut to length, joints mitred, and corners grinded and jointed with aluminium angle cleats with fins to match the section of frame , including providing & fixing 5 mm thick plain float glass panes of Modiguard/Saint Gobain/ Triveni / TATA etc or approved make fixed with heavy duty 0.70mm thick aluminium clips, neoprene rubber gasket, angle cleat etc at top portion and providing and fixing 4mm thick APP sheet in bottom portion ( approx 0.9m height)of approved shade and colour, approved brand like alcon, 4 no heavy duty MS hinges for fixing Door shutter(Heavy duty), 6 levers Alfa Lock with 3 Nos Key, Aluminium handle etc all labour, material, T&P, transportation, wastage, necessary screws and dash fastener for fixing of frame and other required fixture for proper completion of work as per specification & direction of E.I.C.(Tolerance of Aluminium members ± 5% or as per manufactures/IS specification in thickness) 6.00 Sqm 4080.00 24480.00

18 Providing and fixing sleek type aluminium door closure of Godrej/ Hettich/Amar make or equivalent moving 60kg door weight all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of EIC. 3.00 Nos 833.86 2501.58

19 Providing, fabricating and fixing of aluminium sliding door partly glazed al. door of extruded sections of high strength and weight ratio (All the aluminium section are to be powder coated for door shutter (All the aluminium section are to be powder coated with 50 micron minimum) Vertical frame of 83 x 44 x 2 mm for style, Top & middle rail section 83 x 44 x 2 mm and bottom rail section of 114 x 44 x 2 mm (with tolerance ± 5%) and cut to length, joints mitred, and corners grinded and jointed with aluminium angle cleats with fins to match the section of frame , including providing & fixing 5mm thick Pin headed windows glass Pane of Modiguard/Saint Gobain/ Triveni / TATA etc or approved make fixed with heavy duty 0.70mm thick aluminium clips, neoprene rubber gasket, angle cleat etc at top portion and providing and fixing in bottom portion 4mm thick APP sheet in (approx 0.90 m height) of approved shade and colour, of approved brand like alcon or as approved by EIC with G Channel for Sliding Door shutter(Heavy duty), two nos Sliding Roller for each shutter, 7 levers Godrej Lock with 3 Nos Kay etc all labour, material, T&P, transportation, wastage, necessary screws and dash fastener for fixing of frame and other required fixture for proper completion of work as per specification & direction of E.I.C.(Tolerance of Aluminium members ± 5% or as per manufactures/IS specification in thickness) 7.00 Sqm 4149.00 29043.00

20 Providing & fixing powder coating Aluminium anodized sliding window partially fixed and partially sliding of anodized Aluminium section in window shutter, tripple track Al. window with following specification for each window:- i) Outer Al. frame 100x44x2mm section, ii) Three track Al. channel 100x25mmx1.5mm approx, iii) Window Shutter of 12x25 mm appx. Size, for one leaf reflective glass sliding shutter other outer leaf mosquito SS mesh sliding shutter using bearing,handle, intermediate locking sections/channels with T-rubber beading and U-rubber gasket, screw aluminium angle section for fixure etc. clutch type handle (heavy duty) in each shutters, 4.8 mm thick Reflective glass in different colour of make Saint gobain / Modiguard/Triveni / TATA or as approved by EIC, including Stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed on Alluminium framed shutter tolerance as per manufacturer / IS specifications and member will be fitted as per drawing c/c horizontally and vertically both ways complete in all respects including material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 8.00 Sqm 7004.00 56032.00

21 Providing & applying two coats applied @ 1.67 ltr/ 10 sqm of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 800.00 Sqm 102.41 81928.00

Part-B- Electrical Items 0.00

1 Supply & making point wiring with PVC insulated multistrand copper wire of size 2X1.5 sq mm for light & fan light point with 1X1.5 sqmm. earth wire((for fan points only)) (ISI mark), grade 1100V make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering, matching painting/on wall surface with accessories such as bends, junction boxes, inspection boxes, sheet cover, socket, lock nut, brass bush,saddle, screw-gullies etc.(as required) or in existing conduit(as per site) with s&f of modular metal box concealed in wall/on wall surface with modular frame, plate for fixing of switch, socket , fan regulator etc., internal connection, testing complete in all respect as per EIC.(Note: (i). Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green. (ii). Switch socket colour White/Cream or as directed by EIC) 0.00

a) Light point wiring as per item above by providing & fixing 5/6 Amp modular switch Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make, making connection & testing complete in all respect. 30.00 Nos. 1216.21 36486.23

b) Secondary light point (extension point) wiring as per item above, controlled by the switch (as per item 1) by multistrand copper wire of size 1.5 sqmm. 20.00 Nos. 664.65 13293.07

c) Fan point wiring as per item above by providing & fixing modular 5/6 Amp switch & stepped type fan regulator-1each (if required as per site condition) make: Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 13.00 Nos. 1502.06 19526.72

d) Supply & fixing of 5/6 Amp modular multi socket(5pin)- 01 No. & 5/6 Amp modular switch - 01 No., Anchor/Havells/L&T/Legrand/GM/ABB make on the same board (Item No. 1), making connection & testing complete in all respect. 2.00 Nos. 174.30 348.59

2 Circuit wiring from SPN/TPN D.B. to switch board with 2x2.5 sq. mm. multistrand copper wire (ISI marked) with 1X2.5 sqmm. earth wire (ISI mark), grade 1100V make-Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/Cap cab for continuity.(Note: Color code for Phase wire:Red/ Yellow/ Blue, Neutral: Black & Earth: Green). 50.00 Mtrs 213.03 10651.50

3 Supply & making point wiring with PVC insulated multistrand copper wire of size 2X2.5 sq mm+1X2.5sqmm. earth wire(ISI marked) make Havells/Anchor/National/ Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/ Cap cab in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering wall surface (as required) with all accesories such as bends, Junction boxes, Junction box cover (laminated sheet), inspection boxes, socket, lock nut etc. or in existing conduit(as per site) for power point and Supply & fixing of modular 6pin, 5/6A & 15/16A socket outlet and 15/16A switch- 01 each, Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make by S&F of appropriate modular metal box with modular frame, plate, screw etc. by cutting, plastering, matching painting/on wall surface(as required) , making connection & testing complete in all respect as per direction of EIC..(Note: i) Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green ii). Switch socket colour White/Cream or as directed by EIC). 12.00 Nos. 2158.19 25898.25

4 Supply and making point wiring with PVC insulated multistrand copper wire of size of 2X2.5 sqmm. +1X2.5with earth wire (ISI marked) make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex/ Kei/ RR Kabel/ Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering wall surface with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. for UPS point and Supply & fixing of modular 5/6A, switch- socket(5pin) 02 each, Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make by S&F of appropriate modular metal box with modular frame, plate, screw etc. by cutting, plastering, matching painting/on wall surface(as required) , making connection & testing complete in all respect as per direction of EIC..(Note: (i) . Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green. (ii). Switch socket colour White/Cream or as directed by EIC) 12.00 Nos. 2443.26 29319.13

5 Supplying, installation, Testing & Commissioning of 50 watt Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). make Crompton/Surya/Havells/Philips/Bajaj/Syska. 10.00 Nos. 1764.41 17644.07

6 Supply, Installation, Testing and Commissioning of ceiling fan 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) with BrushLess Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 60-75 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. Make: Usha/ Orient/ Bajaj/ Havells/ Crompton/ Atomberg, complete in all respect as per EIC. 10.00 Nos. 1930.11 19301.13

7 Supplying, installation, Testing & Commissioning of 18- 22 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/ 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineerin- Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). , make Crompton/Surya/Havells/Philips/Bajaj/Syska. 25.00 Nos. 661.02 16525.42

8 Supply and fixing of Exahust Fan (metal) 230-250 mm approx size, make Crompton/Surya/Havells/Philips/Bajaj on wall/ceiling, connection & testing, complete in all respect as per EIC. 3.00 Nos. 1577.40 4732.21

9 Supplying and fixing of 12 way (4 + 36), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCCB and MCBs (Make: Legrand /Havells /L&T / Hager/ Schneider/ABB/Anchor/Indoasian/Eaton) as given below: a) MCCB TP 125Amp, 16KA - 1No. b) MCB 'C' Curve TP 32Amp - 4Nos. c) MCB 'C' Curve SP 32Amp - 8Nos Note: DB and MCB should be same make or as directed by EIC. 1.00 No 19162.63 19162.63

10 Supplying and fixing(in place and after removal of existing DB) of 8 way (4 + 24), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCCB and MCBs (Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton) as given below: a) MCCB TP 100Amp, 16KA - 1No. b) MCB 'C' Curve TP 32Amp - 5Nos. c) MCB 'C' Curve SP 32Amp - 8Nos d) MCB 'C' Curve SP 10Amp - 1Nos Note: DB and MCB should be same make or as directed by EIC. 1.00 No 16485.42 16485.42

11 Supplying and fixing of 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required with following lsolator/ MCBs)(Make: Legrand /Havells /L&T / Hager/ Schneider/ABB/Anchor/Indoasian/Eaton): a) Isolator DP 63Amp - 1 No. b) MCB 'C' Curve SP 5 Amp to 32 Amp - 6 Nos. Note: DB and MCB should be same make or as directed by EIC. 1.00 No 3591.30 3591.30

12 Supply, laying(on wall surface) and testing of size 3.5CX95 sqmm. aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cable conforming to IS7098 part I 1988, make Gloster/Havells/National cables/Polycab/TESCAB in the metal pipe as per standard code of practice as per direction of EIC. 300.00 Meter 523.59 157075.53

13 End Termination of 3.5CX95sqmm.size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 2.00 Nos. 455.50 910.99

14 Supplying, installation, Testing & Commissioning of 36 watt Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). make Crompton/Surya/Havells/Philips/Bajaj/Syska. 40.00 Nos. 3381.36 135254.24

15 Supply & making point wiring with PVC insulated multistrand copper wire of size 2X4.0 sq mm+1X4sqmm. earth wire (earth connection by looping) (ISI marked) make Havells/ Anchor/ National/ Polycab/ Gloster/ Finolex in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering wall surface(as required) with all accesories such as bends, Junction boxes, Junction box cover (laminated sheet), inspection boxes, socket, lock nut etc. (as per site) for power point. Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required., Anchor/ Havells/ L&T/ Legrand/ GM/ ABB make by S&F by cutting, plastering, matching painting/on wall surface(as required) appropriate modular metal box with modular frame, plate, screw etc., making connection & testing complete in all respect as per direction of EIC. 10.00 Nos. 2633.05 26330.51

16 Supply and making point wiring with PVC insulated multistrand copper wire of size of 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (earth connection by looping) (ISI marked) make Havells/Anchor/National/Polycab/Gloster/Finolex in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. as per site for AC point. Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let Anchor/ Havells/ L&T/ Legrand/ GM/ ABB and complete with connections, testing and commissioning etc. complete in all respect as per direction of EIC. 5.00 Nos. 7854.22 39271.11

17 Supply, making & testing of earth pit for earthing as per IS standard the job involves digging of pit up to 4.5 meter deep, supply & fixing of GI pipe 40mm dia (Internal) 4.5mtrs long, class B, make Jindal/TATA, wooden charcoal & salt (40 Kg each approx) suitable GI reducer CI funnel CI hinged Chamber cover with frame size 12" X 12" GI nipple etc and perforation from bottom, making of Earth Chamber and S&F of earth resistance identification marker with MS angular channel of thickness 5 mm of size 40 mmx40mm of length 450mm. the channel shall be grouted approximately 300 mm x 300mm x300mm depth of which 150 mm will be below the ground cement concrete pedestal work with 300 mm channel above the ground length just next to earthing pit as per direction of EIC. 2.00 Nos. 5310.26 10620.51

18 Supply, laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode including connection/terminating with GI nut-bolt-spring washers etc.complete as required(jointing shall be done by overlapping and with 2sets of GI nut bolt & spring washer spaced at 50mm) as per instructions of engineer in charge. 100.00 Meter 111.55 11155.03

Total 4054022.50

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 4054022.50

Total Quoted value including GST @18% 4783746.55

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya