K.Paramathi Block - Thennilai East - Mines

Amount

Name of the Work : Construction of Community Hall at Semmandampalayam in Thennilai east Panchayat

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15 cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,

Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete

Brickwork in CM 1:5 using country bricks ground moulded 23x11x7 cm for the following including aving etc., complete

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m. Ht for plain surfaces including struting etc., complete.

Below level

Above level

Supplying and fabrication of steel including cost and conveyance of all materials to site and all labour charges etc., complete.

Reinforced Cement concrete 1:1.5:3, mix using 20 mm HBG Metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Plastering with C.M 1:5, mix 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Plastering with C.M 1:3, mix 10mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Paving the floor with Vertified tiles 0.60mx0.60mx0.008m in all floors over a base layer of cement mortar 1:3 (One cement and three sand ) 20mm thick laid in-suit and pointed with samme coloured cement as

Providing weathering course with best quality of brick jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being 32 to 12.5 well beated with wooden beaters for giving required slope and thickness

Finishing top roof mix one course machine pressed tiles of size 20 cm x 20cm x 2cm approved qty with, CM 1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc.,

Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends & clamps etc.,

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc., complete, in all floors.

Fabricating Supply and fixing and position of MS Door with single leave . The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x25x5 mm flats covere

Fabricating Supply and fixing and position of MS Window with two leave . The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x25x5 mm flats covere

Wiring with 2x 1.5 sq.mm (22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch wih painting of suitable colour for open PVC light point /fan point (For electrical regulator). SD 17

Wiring with 2x 1.5 sq.mm (22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm ,m TW switch box for 5A3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC plug point.m(SD 36)

Wiring with 2x 4 sq.mm (56/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm ,m TW switch box inflush with wall with 3mm thick hylem sheet cover for 15 A3 pin flush type non inter locking CS plug with painting of suitable colour with continuous earh wire connection of 14 SWG TC wire for open PVC power plug poin ( SD 39)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI Bearer Wire of service connection Mains (SD 64)

Supply and fixing 4' 36Watts Flu Fitting complete with Electronic Ballast with TW round Block On wall or Ceiling with Flu Tube with PVC unsheathed Copper Leads from Terminal to the Tube Light Fittings (SD 87)

Supply and fixing of 1200mm (48") Sweep AC Ceiling Fan complete with stepped Electronic 300 W Regulator , with 1m down rod with Fan clamp with side plates and cross arm of size 450mm (18") (SD 106)

Supply and fixing of 16Amps DP Main Switch with metal clad of 500w with fuse and Neutral (Side handle) on suitable TW Box PWD Earthing

Supply and fixing of 4'40Watts Single Street Light Flu Fitting complete with copper chok and condesor with 20 mm GI Pipe ( Class "B") with one number 20mm GI bend complete on the existing post/ wall with 16A Aerial Fuse unit on M.S Plate with PVC unsheathed Cu. Leads, with MS clambs with Aluminium painting with Flu Tubes Street Light Fittings (SD 94)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

K Suresh