Upgradation Of Water Supply Network With Pumping Machinery Including Electro-Mechanical with Three-Year Free Comprehensive Maintenance Guarantee For Zone-I II and III At Notified Area GIDC-Sachin 2026-27.

NAME OF WORK: -Upgradation Of Water Supply Network With Pumping Machinery Including Electro-Mechanical

With Three-Year Free Comprehensive Maintenance Guarantee For Zone-I, II And III At Notified

Area, GIDC-Sachin 2026-27.

DESCRIPTION QTY UNIT RATE AMOUNT

1 Supply, installation, testing & commissioning of Vertical 180 KW 14,878.00

Turbine pump motor set of specified duty parameters &

guaranteed efficiency of following MOC with specified

capacity vertical solid shaft TEFC squirrel cage induction

motor (with minimum IE-3 efficiency class), working on

three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated

speed 1000 RPM along with column and bowl assembly,

discharge head, base channel / RSJ etc. complete as per

relevant IS. M.O.C.: Impeller & Sealing Rings: CF8M, Bowl

& Suction Bell: Cast Steel WCB , Shaft with coupling: SS

410, Column Pipe: MS ERW, Mechanical seal (above

kw),Base Plate: MS, Line Bearing: Thordon, Suction

Vertical Turbinel pump

77.09 lps, 33 M Head, (2W + 2S)

2 Do but 73 lps, 34 M Head, (2W + 2S) 180 KW 14,878.00

3 Do but 59 lps, 33 M Head, (2W + 2S) 152 KW 14,878.00

4 Providing submerged centrifugal pump sets (water 11.2 KW 11,634.00

immersed, dry air filled, class "F" insulated TEWC motor

integrally mounted on volute casing pump sets for water

duty, 3-phase, 50 ± 3% Hz, 415 ± 10% V along with suitable

foundation / installation device with cable length from

pumps to panels & of following Material of Construction:

Impeller: CF8M, Casing: C.I. FG 260, Wearing Ring: SS, TC

mechanical seal, CS/SS bearing, SS shaft with sleeve, SS

strainer & MS motor body.1-upto 30.0KW

13.90 lps, 15 M Head, (1W + 1S)

5 Do But Installation, testing & commissioning for pump sets. 2 Job 20,948.00

6 Expansion Below:- Supply, intallation, testing & 2 No. 4,896.00

commissioning of flange ends expansion bellow as per

EJMA standards of overall length of minimum 300 mm,

designed for 15 mm axial compression and 5 mm axial

extension with tie rods etc. of following MOC & pressure

ratings. MOC: Bellows: SA 240 Gr. 304; Internal sleeve: SA

240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS 2062 Gr.

B (Drilling as per IS 1538 / IS 6392) & Limit rods & nuts:

9 Reflux valves 2 Nos. 8,933.00

Supply, lowering, laying, and jointing of ISI mark CI D/F

reflux valve as per IS: 53112 (latest edition) of follwing class

and diameter including alll taxes, insurance, transportation,

frieght charges, octroi, inspection charges, loading,

unloading, conveyance to departmental strores, stacking,

cost of all labour, jointing material, nut blots and giving

satisfactory hydraulictesting, etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark

11 Sluice valve:- Supply, lowering, laying, and jointing of ISI 4 Nos. 4,034.00

mark CI D/F Sluice Valves as per IS:14846 (Latest Edition)

of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental

stores, stacking cost of all labour, jointing material, nut blots

and giving satisfactory hydraulictesting, etc. complete (Rate

for all class of valves) sluice valve /BF valve. PN-1.6 With

gear operated (Ait-1 type long body) (for SCADA actuator-

compatible gearbox valves) PN- 1.6 80 mm

15 Air valves:- Providing and supplying C.I Temper proof Air 4 Nos. 16,427.00

valves with SS 304 float gun metal- nozzle of approved make

& quality of following class and diameter including all taxes,

insurance, trasportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental

store, stacking etc. complete. With Isolating sluice valve PN

16 MS Specials flange ended 1,385.00 Kg. 98

1) Up to 300mm dia.

17 2) Above 300mm dia. 1,944.00 Kg. 98

18 MS Pipe:- Supply, lowering, laying, and jointing of Electric 37 RMT 2,119

Resistance Welded (Up to 400mm)/Submerged Arc

Welded(Above 400mm) M.S.Pipe having beveled ends plate

or coil conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all

taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete. (Rate for MS

Pipe based on the ex. works price of HR Coil as Rs.58500

per MT - withouth GST (Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above 10 mm) as onJan-23.(

WPI Index of H. R Coil of Dec-22 is 144) and Lowering,

laying, jointing & welding in position to correct line & level

M.S. Pipe with outerside 3 LPE coating & inside solvent free

liquid epoxy lining on pedestal or chairs upon prepared

formation or prepared bedding in trenches the rates include

conveyance from store to site of work loading, unloading,

heat shrink sleev jointing hydrotesting etc. complete.- I/S

Solvent free Liquid Epoxy Lining (406 micron) + O/S 3 LPE

Coated M. S. Pipe. :- Pipe dia in OD 168.3mm 4.5 mm

19 Pipe dia in OD 273 5.0mm thickness 39 RMT 3,640.00

20 Pipe dia in OD 355.6 5.6mm thickness 69 RMT 5,106.00

21 Welding:- Welding in all positions with required number 121.9446 Rmt 681.00

runs, for M.S.Pipes internally and/or externally including

gauging wherever necessary, fixing appurtenances and other

accessories in connection with pipe laying work as per

specification.As Above for Butt joint: Plate thickness. 1)

welding for Pipe thickness 4mm to 7mm

22 Gas Cutting of MS Pipe / Plates:- Gas cutting(Either square 121.9446 Rmt 56.00

cut or V cut) pipes, plates etc. including all costs for the

following thickness. 2) Above 5mm up to 10mm

23 Full Bore Electromagnetic Flow Meter- Regular Power 1 No. 91,269.01

operated: Design, Supply, Installation, Testing,

Commissioning of Full Bore Electromagnetic flow meter

with factory calibrated,Regular Power Operated, flanged

connection, Flow sensor, Indicator, transmitter and totaliser

with all accessories viz.surge arrestor, associated cables,

cabinets, hardwares, etc complete as per following

specifications: Flow Transmitter/ Converter ( Remote Field

Mounted): Microprocessor based, Modular design, 2 line

LCD for indication of actual flow rate, forward, reverse, sum

totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity,

4 to 20 mA with HART/Modbus output, one scalable pulse,

one status output, IP 67 protection, Die cast aluminium/

polycarbonate/ SS316 with Anticorrosive Paint/ PU finish

with glass window enclosure, Inbuilt EEPROM and Data

Logger, 20 meters cable length for sensor to transmitter

communication etc alongwith wall mounted/ stand mounted

cabinet.: Full Bore Electromagnetic Flow Meter (Regular

Power Operated)- PN 16 For PN 16 rating, 10% rise in rate

to be considere on rate of PN 10 rating Item (Item No. 2A)

(7) 150mm Nominal Bore

24 (11) 350mm Nominal Bore 3 No. 2,04,490.00

25 Pressure Gauges with Accessories:- Design, Supply, 14 Nos. 2,629.00

Installation, Testing, Commissioning of Diaphragm sealed

Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304 Case with

Bayonet Type Bezel, SS316 L Diaphragm, SS316 Bottom

Housing Material, SS 316 Movement material, Aluminium

dial with black graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out disc, shatter

proof glass, SS tag plate etc as per IS 3624. (a) 100 mm Dial

Size, 0 to 10 Kg/cm2

26 Pressure Transmitter:- Design, Supply, Installation, Testing 18 Nos. 29,147.00

and Commissioning of Sealed Diaphragm Type Pressure

Transmitter. Piezo-resistive sensor technolgy based pressure

transmitter with Micro-processor based integral LED/ LCD

display, with accuracy of ± 0.3% of span, external zero and

span adjustment, self diagnostics, temperature sensor for

compensation. 15 to 36 V DC power supply, output signal of

4-20 mA DC with HART. Minimum IP 65 degree of

protection. Aluminium housing with epoxy coating,

Accessories like snubbers for pump discharge applications,

three way manifold, mounting brackets, name plate etc.

Material for accessories shall be SS. Protection Box/Canopy

shall be provided for outside installed transmitters. Pressure

Transmitter shall be suitable for following Range. :- 0 to

27 Ultrasonic Level Transmitter:- Ultrasonic Type Level 9 No. 59,436.00

Transmitter with Remote Display : Design, Supply,

Installation, Testing and Commissioning of NOn Contact

Ultrasonic Type Level Transmitter with Remote Display.

Sensor: The sensor should be non contact type, field

mounting type, housing shall have minimum IP65

protection, PP/ PVC Sensor MOC, with sensor to transmitter

cable. Remote Indicator cum Transmitter: Microprocessor

based indicator with LED / LCD digital display, panel/ wall

mounting type, power supply shall be 110-240 Vac or 15 to

36 Vdc, 50 Hz ± 10 %. Accesories: Mounting bracket, nut,

bolts etc as per system requirement and Hook up diagram of

the Instruments. Level Transmitter shall be suitable for

following Range.;- 0 to 10 Meter

28 LV PCC & MCC Panel:- Design, Supply, Installation, 1 Nos. 12,80,270.00

Testing and Commissioning of Power cum Motor Control

Centre of 400A, 415, TPN, Power Cum Motor Control

Centre (PCC & MCC) cubical having depth not less than

1000 mm throghout the required length & detachable,

fabricated from 2 mm CRCA sheet steel, free standing, floor

mounted, compartmentalized, extensible, dust and vermin

proof enclosure, duly painted provided with required rating

switch gears and shall be complete with (a) required size of

TPN Electrolyte 400 A Copper bus bar having cross section

not less than 1.6 Amp per 1.0 Sq. MM, (b) 400 Amp

capacity of 4 pole- EDO microproccessor based MOULDED

CASE CIRCUIT BREAKERS with RS 485 / RS

computer interface . All release of all MCCB, VFD should

have in built power meter/ analyser having, 3 phase, V, KW,

I, KVA, KVAh, KVArh, PF, Frequency, harmonic analysis up

to 30th harmonic and last ten faults history.with RS 485 / RS

232 computer interface facility and all other required

protection etc., complete. The PCC & MCC panel shall be

supplied as per detailed specifications with remote control

Panel including ON/OFF Push Button & indicator with

emergancy stop & reference single line diagram (SLD)

complete or the instruction of Engineer In charge. (45KW X

29 Do but (45KW X 4 nos VFD With 7.5KW x 2 nos S/D) 1 Nos. 13,07,041.00

30 Do but (37KW X 4 nos VFD) 1 Nos. 12,55,824.00

31 LV APFC PANEL:- Supply, installaton, testing & 3 No. 1,38,383.00

commissioning LV APFC panel consisting of required

capacitor banks for continuous duty to improve P.F. 0.85 to

0.99 in required steps enclosed in dust & vermin proof

compartment, indoor type, fabricated from CRCA sheet steel

with minimum thickness of 3 mm for base frame / channel /

gland plates, 2.0 mm for load bearing members / doors &

mm for internal partitions, minimum degree of protection -

IP 42, busbar chamber, required size of Al bus bar / terminals,

minimum 10 stage APFC relay, metering, indicating lamps,

push buttons complete as per IS: 16636-2017 with latest

ammendment & detailed technical specification and data

sheet as under.Up to 50 KVAR capacity: APFC panel

consisting following items. a) 125 A, 50 kA for 1sec. TP, TM

based MCCB with spreader terminals & rotary handle b) 0-

125 A range analogue ammeter of 96 x 96 mm size with

selector switch c) 3 nos. 125 / 5A, 10 VA CL-1.0 cast resin

type current transformer d) Suitable rating MCCB / MCB

&Contactors for each capacitor bank e) Suitable rating APP

type capacitor banks (vacuum impregnated with non-PCB /

non toxic oil, internally delta connected with built in internal

fuses complete with discharge resistances & terminal cover)

of approoved make in required steps with well suited detuned

reactor is placed in series with each capacitor step. (e.g.

KVAR capacity will be provided in steps of 2 nos x 5 KVAR,

2 nos x 7.5KVAR & 2 nos x12.5 KVAR). f) Enclosure

dimensions: 1600 (H) x 1150 (W) x 600 (D) As per above

32 PVC insulated flat / round submersible copper cables: PVC 70 Rmt. 81

insulated round submersible cable as per detailed technical

specifications conforming to IS 694, IEC 60227 / 60228. a)1

34 Supply installation testing commissioning Shielded Shielded 300 Mtr. 203.01

Control Cables for VRV System with necessary ISI mark

Medium class rigid PVC pipes with necessary accessories

with termination in machine and control equipment’s. (C) 4C

X 1.5 Sq mm Shielded Armoured

35 Supply, laying, testing & commissioning 1.1 kV grade, 400 Mtr. 504

XLPE insulated, stranded Aluminium conductor, galvanised

steel flat strip / round wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall surface with

necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS:7098 (Part-1) & IEC:60502

(Part-1) of following sizes: g) 3.5 core x 150 Sqmm

36 h) 3.5 core x 185 Sqmm 200 Mtr 622

37 Cable Terminals (Lugs):- Providing & fitting crimping type 32 Ea. 21

Cable Terminals (Lugs) conforming to IS of following types

and sizes Aluminium Tubular Terminals (Long Barrel) (in

Sq. mm.). l) 150 sqmm

39 Copper Tubular Terminals (Long Barrel) (in Sq. mm.) a) 2.5 16 Ea. 4

41 Providing & fitting heavy duty brass cable glands (nickel- 4 Ea. 73

plated) with washers & rubber ring conforming to IS,

suitable for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands. a) 3 sqmm

45 Providing and fixing printed instruction chart both in English 16 Ea. 130.29

and Gujarati and duly framed with front glasses, for

treatment of person suffering from Electric shock with

minimum 50" diagonally size.

46 Supplying rubber matting of following thickness as per 15 Sq.Mtr 1027.17

IS:15652/IEC 61111. (b)4mm

47 Providing pair of rubber hand gloves suitable for working on 6 No. 214.12

11 KV/22 KV supply.

48 Providing and erecting metallic vitrified danger notice board 12 No. 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

49 Providing and erecting metallic vitrified danger notice board 12 No. 81.81

as per language suggested by engineer incharge for HIGH

VOLTAGE installation to be erected as per IS.-2551.

50 Supplying & erecting ABC powder type 'Ceasefire' type Fire 12 No. 5090.4

extinguisher as per IS 13849 or 6 Kg capacity with necessary

clamp for erection on wall

51 Supplying & erecting carbon dioxide (CO2) fire extinguisher 6 No. 8671.86

user of following capacity with necessary clamps made from

50 x 6 mm M.S. Flat with nut & bolts grouted in wall

complete. [B] For 5.5 / 6.5 KG Capacity

52 Making trench in soft soil of suitable width of 90 cm deep 1,590.00 Mtr. 55.55

for laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

53 Covering of cable with second class bricks or cement tiles 600 Mtr. 140.39

laid cover the cable crosswise & also on both sides with

covering of 7. 5 Cm. layer of sand above & below cable (16

bricks per meter)

54 Providing & laying approved make Double walled 690 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable.

(A)50 mm outer dia.

55 (C))90 mm outer dia 600 Mtr. 95.95

56 Providing and erecting ISI mark Medium class RIGID PVC 630 Mtr. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed. (b) 25 mm

57 Supply & laying GI perforated type cable trays with returned 240 Rmt. 228

edge / flange, fabricated from 2.0 mm thk sheet steel in the

standard length of 2.5 mtrs, duly hot dipped galvanized after

fabrication as per IS 2629-1989 / IS 4759-1984 including

accessories such as coupler plates/ fish plates, bends, tees,

reducers, elbows, covers and electro-galvanized hardware

etc, erected on existing support as per specification and

instruction of Engineer-in-charge. a) 100(W) x 35(H) x

58 Supply, installation, testing & commissioning single girder 3 Set 4,76,250.00

type fully electrically operated EOT crane with electrically

operated hoist, class II duty, geared travelling trolley with

seven meter lift complete with long travel rail track (40 mm

sq. bar), moving or cross girder, all three motions electrically

operated by suitable rating motor IP 54, control panel &

down pendant control block, brake, safety device, cables

form motor to starter panel & other required accessories &

tested as per IS Specifications. capacity 2 Ton, Span 6m -

9m, Long travel 12mtr, Lift 6m -10m.

59 SITC of Vertical Air Termination Solid aluminium with 3 Ea. 9,416.23

Base- 10 mm dia and 1000 mm long. Air Termination Base

tested for conditioning, Ageing Test & Lightning impulse

current withstand test: 100 kA of 10/350µs waveform in an

accredited Third party laboratory as per 6.3 & 6.4 of IEC

62561-1 2017 protocol with MAST 34mm dia 3000 mm

long- Cold Galvanized

60 SITC of 8 mm dia solid Aluminium Conductor for roof top 150 Mtr. 299.97

mesh grid and tested as per IEC 62561- 2 conducted in the

Govt. accredited thirty party laboratory to meet the

requirement of IS/IEC 62305 with Required Accessories -

Aluminium Holding clamp at every 1 mtr distance,

Aluminium/SS cross splicer at every crossing of Alu.

conductor, Expansion piece with connectors at every 20 mtr

distance, Aluminium straight Splicer to connect conductors.

All Accessories should be tested as per IEC 62561-1

Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning

impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test ) conducted in a

sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

61 Providing and erecting required size HOT deep Galvanised 150 Kg. 77.77

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

62 Supplying & erecting earth pit of minimum bore dia.150mm 23 Nos. 5,760.03

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted. (b)For

Electrical installation up to 11 KV in normal soil. Length of

Pipe : 2.00 mtrs.

Back filling Compound :1 no. Bag of 25 Kg.

63 (c) For Electrical Installation covering Transformer Neutrals, 9 Ea. 8,636.51

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing

in normal soil. Length of Pipe : 3.00 mtrs. Back filling

Compound :2 nos Bags of 25 Kg.

64 Supplying & erecting single phase approved make industrial 6 Ea. 3,339.06

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM. [D] 450 mm dia 900 RPM cat

65 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 45 Pt. 372.24

sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of pipe

erected with 6A Tissino Type ISI marked flush type switch /

bell push and accessories erected on Metal / PVC/Wooden

Box covered with 3 mm thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

66 Point wiring for independent PLUG with following size 12 Pt. 518.58

mains earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires

upto 10 mt length, in following below of pipe erected

complete with ISI marked 3 / 5 Pin socket and tissino type

switch erected with earth continuity connection erected on

Metal / PVC/Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic/Laminated sheet. [B] 6/16A

Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from

mcb d b boards.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

67 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 6 Pt. 670.24

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D. Connector as

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete cat. III

68 Providing and erecting approved make split air-conditioning 6 Ea. 45,209.62

unit consisting of copper condensing unit with fan motor,

hermetically sealed rotary compressor with accessories etc.

duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied

proper insulated copper tubing, drain PVC pipes suitable for

( cost includes powder coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control) with necessary

core cutting. (2)For ISEER Range (KWH/KWH)(4.0 to

4.49). (b) for 1.5 ton capacity

69 Supplying and erecting approved make Octagonal pole made 30 Ea. 8,192.11

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M20

Bolts and 600mm long J-Bolt.Approx Pole weight 59 kg

70 Providing and erecting street light pole bracket comprising 45 Ea. 614.08

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size

pole top having sufficient fasteners for fixing the brackets

and having spread of 1 mtr. length with suitable rise as per

site condition & suitable welded stiffener reducer and nipple

with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms.

[A] Single Arm Bracket 1 Mtr

71 Providing and erecting Pipe type earthing having 150 40 Ea. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

72 Providing and erecting Pipe type earthing with 40 mm dia 3 Ea. 823.15

2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed (For panel)

73 For using salt and charcoal / coke as required for pipe type 33 Ea. 171.7

74 Supplying, erecting, testing, commissioning approved make 3 Ea. 1,41,616.14

M.S. Polygonal High Mast Pole having following general

Specification. (a) Polygonal Section fabricated from M.S.

Plate confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985) Lantern

carriage with ring and rubber lines for erection of luminaries

of suitable site. (b) Maximum telescopic section not more

than four (c) Double drum gear pipe motorized winch with

6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved

make L.E.D. aviation light = 1 No. Lightening arrestor =

No. with necessary wiring of 2.5 sq.mm 5 core ISI copper

cable Unarmoured. (e) Bottom most section suitable for

mounting reversible motor and switchgears having door not

more than 1400mm x 300mm with waterproof gasket &

hinges & locking arrangement. (f) Pole structure comprises

suitable size of reversible motor, cable and necessary

switchgears with control panel. (g) bottom section shall have

suitable size of thickness supports ribs foundation bolts nuts

etc. (h) Item not comprises the cost of lanterns. (i) Necessary

Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of

High Mast poles [1] High Mast 12 Mtr. TOP A/F 105 mm,

BOTTOM A/F 360mm, No. of Sec. No. - 1, Bottom

Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos.,

Suitable for mounting Fitting of Light - 6 Nos.

75 Supply, laying, testing & commissioning 1.1 kV grade, 540 Mtr. 78

XLPE insulated, stranded Aluminium conductor, galvanised

steel flat strip / round wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall surface with

necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS: 7098 (Part-1) & IEC:

(Part-1) of following sizes: 4 Core x 6.0 Sqmm

76 4 Core x 10 Sqmm 300 Mtr. 97

77 Providing & erecting Approved make Ceiling Fan with 6 Ea. 2,311.89

double ball bearing ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep complete having 3 blades

aluminium body and blade sets having ornamental design

shanks , canopy erected with earthing. [ Make shall be

approved by Engineer in Charge]

78 Supplying and erecting 19 / 20 mm. nominal bore Medium 6 Ea. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

79 Supplying & erecting Fan Hook of 10 mm M.S. Round bar 6 Ea. 43.43

grouted in RCC slab with Making the site as original.

80 Supplying & erecting fan hook box of 10 mm M.S. round 6 Ea. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty PVC

box complete erected concealed in Ceiling with necessary

81 Providing Fan clamp of 30 x 5 mm flat of required length & 6 Ea. 98.98

10 mm M.S. Bolt & Nuts erected with necessary hook of

mm M.S. Round Bar.

82 Providing 2.5mm.thick laminated acrylic sheet to cover the 6 Ea. 18.18

fan hook or Fan box.

83 Supplying and erecting LED indoor fittings with LEDs of 15 Ea. 373.7

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

84 Supplying and erecting LED street light / Flood light fittings 42 Ea. 4,997.48

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (ii) above 48 to 60 Watts cat-III

85 (B) Flood Light (IP-65), Surge protection -4KV integral and 18 Ea. 10,818.11

,Light must have 440VAC line supply with over-voltage

protection. (vii)above 200 to 250 watts

86 Supplying and erecting Flexible PVC insulated multi strand 750 Mtr. 46.46

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. (e) 1.50 Sq.mm 3 core round

87 (k) 4.00Sq.mm 4 core round PVC sheathed 450 Mtr. 176.75

88 providing and erecting Miniature circuit breaker single pole 45 Ea. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

89 Providing and erecting Approved make RCCBs conforming 6 Ea. 2,637.11

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP

90 Providing & erecting 415 V MCB Four Pole for Motor & 6 Ea. 668.62

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (b)40 Amp. Cat III

91 Providing & erecting 240 V MCB double pole switch for 6 Ea. 330.27

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity

(B) 40 Amp. CAT III

92 Providing and erecting Sheet Steel powder coated MCB 6 Ea. 1,492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (b) sheet steel

double door (IP-43). (iv) 12 Way

93 Supplying & erecting approved make IP 55 grade Company 3 Ea. 12,399.77

fabricated Timer Panel of following capacity for switch On-

Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside

with hinged doors and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole contactor (cat-

III)with analog time switch, auto manual switch of same

make and suitable input and output Bakelite terminals and

with door earthing approved by Engineer in charge. (A)

94 Providing & erecting 240 V MCB double pole switch for 6 Ea. 299.97

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity

(A) 6 to 32 Amp. Cat lll

95 Supplying & erecting approved make LAN cable of 1,200.00 Mtr. 94

following size in existing pipe as per direction. [E] CAT -

96 Supply, Installation Testing & Commissioning 10 Mtr. 5 Ea. 1,310.00

HDMI Interface Cable as per the detailed Specifications

supports transmission of 4K Signals as per the detailed

97 Supply, installation, testing & commissioning of LED TV 43 3 Ea. 38,727.00

inchas per the specification given in Detailed Technical

98 Supply, Installation, Testing & Commissioning of 6 MP 15 Nos. 12,477.67

VARIFOCAL BULLET CAMERA as per the specification

given in Detailed Technical Specification.

99 Supply, Installation, Testing & Commissioning of 4MP 9 Nos. 8,000.00

DOME CAMERA with Camera Safe Box as per the

specification given in Detailed Technical Specification.

100 Supply, Installation, Testing & Commissioning of 14" 15 Nos. 2093.67

CAMERA HOUSING as per the specification given in

Detailed Technical Specification.

101 Supply, Installation, Testing & Commissioning of CAMERA 15 Nos. 608.76

STAND as per the specification given in Detailed Technical

102 Supply, Installation, Testing & Commissioning of 6U Wall 3 Nos. 4,543.00

Mount RACK as per the specification given in Detailed

Technical Specification.

103 Supply, Installation, Testing & Commissioning of UPS FOR 3 Nos. 6,678.75

BACKUP 1100VA as per the specification given in Detailed

Technical Specification. Make will be as per attached make

104 Supply, Installation, Testing & Commissioning of 16 3 Nos. 19,027.50

CHANNEL NVR 2 SATA as per the specification given in

Detailed Technical Specification.

105 Supply, Installation, Testing & Commissioning of POE 3 Nos. 3,800.00

SWITCH 04 PORT as per the specification given in Detailed

Technical Specification.

106 Supply, Installation, Testing & Commissioning of POE 3 Nos. 9,900.00

SWITCH 16 PORT as per the specification given in Detailed

Technical Specification.

107 Supply, Installation, Testing & Commissioning of 3 Nos. 16,900.00

SURVELLIANCE HDD 4TB as per the specification given

in Detailed Technical Specification.

108 Supply, Installation, Testing & Commissioning of POWER 3 Nos. 2,123.79

BOARD 6A, 4 PLUG AND SWITCH as per the

specification given in Detailed Technical Specification.

109 SITC Of SC-SC Fibre Patch cord 3 mtr with joint box as per 9 Nos. 1,880.62

technical specifications.

110 SITC of Fiber Media Converter (10/100/1000 base T) as per 6 Nos. 6,136.76

technical specifications.

Total Amount in Rs.

Total Amount in Rs.

I / We agree to carry out the above work at ____________ % above the estimated rate ((In Words)

_________________________________________________) percentage above the Estimated Tender Rate.

I / We agree to carry out the above work at ____________ % below the estimated rate ((In Words)

_________________________________________________) percentage below the Estimated Tender Rate.

Estimated Amount Estimated Amount

Put to Tender Rs. 2,12,30,449.55 Put to Tender Rs.

Add % Above Rs. _____________ Deduct % Below Rs. ______________

Net Amount Rs.____________ Net Amount Rs. ______________

Net in Figure Rs. _____________ Net in Figure Rs. ______________

I / We have read the Condition mentioned in this tender and agree to abide by the same.

Note:- Estimated Cost put to tender is excluding GST and Including all other Taxes. GST will be paid additional

as per applicable rate prevailing from time to time and all other statutory liabilities are part of estimated

cost and will be bound by bidder. Prospective bidder may please by read carefully, app prevailing policy

/Government Resolution (GT) of Govt. of Gujarat (GoG)/competent authority, regarding GST and submit

the price bid offer accordingly.

Signature of Contractor with Seal Sachin Notified Area,

G.I.D.C.-SACHIN