New Construcion of Ayurvedic Dispensary At.Asta Ta. Kamrej, Dist. Surat

Name of Work : New Construcion of Ayurvedic Dispensary At.Asta Ta. Kamrej, Dist. Surat

Estimated Estimated Rates

Item Amount may

may be Item Of Work Unit

In Figure In word less

Excavation for foundation upto 1.50 mt. depth including sorting out and

stacking of useful materials upto 50 mt. laid. (a) (A) Loose soft soil

Excavation for foundation upto 1.50 mt. to 3.0 Mt. depth including

2 101.80 sorting out and stacking of useful materials and dispossing of the 295.10 #NAME? Cu.mt.

excavated stuff upto 50 Mt. Lead in (b) dense or hard soil

Providing and laying cement concrete of 1:2:4 (1 Cement : 2 Coarse

3 37.63 sand : 4 Graded stone aggregate, 20 mm Nominal size) and curring 3741.68 #NAME? Cu.mt.

complete including cost of form work in (a) foundation and plinth

Providing contrlloed cement concrete M-250 and curing complete

including the cost of the formwork but excluding the cost of reinforce

ment of reinforced concrete work in

(A) Foundation footings base of column and mass concrete.

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding cost of

reinforcement of reinforced concrete work in

(A) For Column up to P.L

Filling available excavated earth (excluding rock) in trenches, plinth,

6 178.65 sides of foundations etc. in layers not exceeding 20 cm. In depth 136.71 #NAME? Cu.mt.

consolidating each deposited layer by ramming and watering.

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding cost of

reinforcement of reinforced concrete work in

(A) Plinth beam

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In foundation and plinth in

cement mortar 1:6 (1 Cement: 6-Fine sand) conventional Ground floor.

Upto plinth level

Providing and laying cement concrete of 1:2:4 (1 Cement : 2 Coarse

sand : 4 Graded stone aggregate, 20 mm Nominal size) and curring

9 5.83 complete including cost of form work in (a) foundation and plinth 3741.69 #NAME? Cu.mt.

(A) Copping @ plinth slab

Filling in foundation and plinth with murrum or selected soil in layer of

10 104.08 20 cms. thick including waterring, ramming and consolidating etc. 301.78 #NAME? Cu.mt.

Filling in plinth with stone dust under floors including waterring,

ramming and consolidating and dressing etc. complete.

Applying general insecticide pest control treatment to floors, cupboards

etc including labour material etc. complete. Using Heptachloride 20 EC.

As Per 6113_pests Consentration Weight 0.50 percent is

12 152.66 recommended one litre chemical emulsion dillute with 39 liter of water 91.63 #NAME? Sq.mt

will give. Total dillute concrentration will be 40 litre inclusive of one

litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface

is recommended as per I.S

Providing & laying controlled cement concrete M-200 work with curing

etc. complete including the cost of form work but excluding the cost of

reinforcement for R.C.C. work for Ground floor.

(C) For Columns

Providing and laying controlled cement concrete M-200 and curing

14 16.92 complete including the cost of form work but excluding the cost of 6345.87 #NAME? Cu.mt.

reinforcement for reinforced concrete work in : Beams for all floors.

Providing and laying controlled cement concrete M-200 and curing

15 14.56 complete including the cost of form work but excluding the cost of 7564.71 #NAME? Cu.mt.

reinforcement for reinforced concrete work in © Slabs thickness 13 cm.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super structure above plinth

level upto floor to level in cement mortar 1:4(1 Cement: 4-Fine sand)

conventional Ground floor. In super structure up to floor two level

Half brick masonry in common burnt clay building bricks having

crushing strength not less than 35 Kg/ Cm2 in cement mortar 1:4 (1

17 39.92 cement : 4- Coarse sand) with 2 Nos. of 6 mm dia mild steeld round bar 653.00 #NAME? Sq.mt

after every three coarse embeded in cement mortar super structure

(for alls Floors) Conventional.

Providing and Laying controlled Cement Concrete M-200 and curing

etc. complete including the cost of form work but excluding the cost of

reinforc ement for RCC work up to floor two level (1) ,lintel

Providing and layiung cement concrete M 200 for reinfored concret

CHAJJA not exceeding 10 CM thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 ( 1 cement :3

fine sand ) to give a smooth and even surface centering and formwork

6098.09 #NAME? Cu.mt.

and curing complete excluding cost of reinforcement.

Providing & laying controlled cement concrete M-200 work with curing

etc. complete including the cost of form work but excluding the cost of

reinforcement for R.C.C. work for F.F floor.

(C) For Columns

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super structure above plinth

level upto floor to level in cement mortar 1:4 (1 Cement: 4-Fine sand)

conventional Ground floor. In super structure up to floor two level

Providing T M T. bar FE 500/ 500 D reinforcement for R.C.C. work

22 19358.61 including bending binding and placing in position complete up to floor 76.21 #NAME? Kg

Providing 10 mm thick cement plaster in single coat on Fair side Brick/

concrete walls for inteior plastering and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) with floating coat of neat

cement slurry on ceiling and softs of stair

Providing 15 mm thick cement plaster in single coat on Fair side Boick/

concrete walls for inteior plastering upto two level and finished even

and smooth in : (ii) Cement mortar 1:3 (1 cement : 3 sand) including

floating coat of neat cement slurry)

Providing 20 mm thick sand faced cement plaster on walls upto height

10 meters above ground level consisting of 12 mm thick backing coat of

25 721.27 c.m.1:3 ( 1 cement: 3 sand) & 8 mm. Thick finishing coat of c.m. 1:1 300.66 #NAME? Sq.mt

cement: 1 sand) etc. complete with three coats of water proofing

cement paint of approved quality etc. complete.

Providing and laying polished kotah stone slab flooring over 20 mm

(average) thick. Base of cement mortar 1:6 (1 cement : 6 coarse sand)

or L.M. 1:1:5 laid over and jointed with gray cement slurry including

rubbing and polishing etc. complete.

Providing and laying kotah stone slab 25 mm. thick in risers of steps,

dado and pillars laid on 10 mm thick cement mortar 1:3 (1 cement:

coarse sand) & jointed with gray cement slurry including rubbing and

polishing etc. complete.

Providing and laying double charge Vitrified Granite tiles 8mm to 10mm

thick 24" x 24" size in flooring treads of steps and landings laid on a bed

28 84.46 of 12mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) pointing 1467.72 #NAME? Sq.mt

in white cement and jointed with white cement slurry dark shade , light

shade , anti skit as per requirment and instructed by engineer incharge

Providing and laying double charge Vitrified tiles 8 to 10mm thick in

skirting, risers of steps & dedo laid on a bed of 10mm thick C.M. 1:4 (1

29 5.63 cement :4 coarse sand) finished with flush pointing in white or color 1467.72 #NAME? Sq.mt

cement. Size 24" x 24" dark shade , light shade , anti skit as per

requirment and instructed by engineer incharge

Providing and laying Ceramic tiles of size 300mm X 300 mm with 8 to

30 7.48 10mm thick in flooring on 10mm thick cement plaster in CM 1:3 1017.30 #NAME? Sq mt

pointing in white cement and white cement slurry.

Providing and laying coloured glased tiles in skirting risers of steps and

dado on 8mm/10 mm. Thick cement plaster 1:3 (1 cement : 3 coarse

sand) pointing in white ceand jointed with white cement slurry.

300x450x8 mm size

Providing and laying Green marble Slab 16 to 18mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3(1-cement : 3-coarse sand ) finishing with flush pointing in white or

Providing and Fixing Flush door shuter solid core construction with S.S

hinges ,hendle,S.S.door stopper,S.S.latches,S.S.aldrop,and S.S. Tadi,

33 9.89 shall cover on entire length and Breadth of the door shall be covered 5276.24 #NAME? Sq.mt

with 1 mm thick leminated sheet on both side & French polish

approved by engineer in charge.

Providing & fixing in position standard extruded Aluminum Three track

(20 mm series) sliding shutters with colour anodized section having

horizontal member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm

x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal

Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with

5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. and Providing and fixing 30mm

wirenet of Stainless Steel wire of IS Gauge designation 85-G with wire

of 0-56 mm diameter including all required materials labours and

equipments as per detailed drwg. as directed.

Providing and fixing standared extruded of alluminium section of size

63.50 x 38.1 x 1.95 mm (Jindalsection no 4605 @ wt 1.094 kg per rmt)

with colour anodized alluminium frame with 5 mm thick transparent

bronze colour tinted float glass with colour anodized alluminium frame

for ventilator with 5 mm thick frosted glass as details etc. complete for

providing and fixing 30mm thick Factory made solid panel PVC door

shutter consisting of frame out of M.S tube of 19 guage thickness and

size of 19mm X 19mm for stiles and 15mm X 15mm for top and bottom

rails M.S Frame shall have a coat of steel primer of apporeved make

and manufacture M.S frame shall be covered with a 5 mm thick heat

moulded PVC C channel of size 30mm X 50 mm formining stiles and

mm thick 75mm wide PVC sheets For a Top rail , Lock rail and bottom

36 6.72 on either side and 10mm (5mm X 2mm) Thick 20mm wide cross PVC 2236.14 #NAME? Sq.mt

sheet as gape insert for top rail and Bottomrails panneing of 5 stiles and

rail with 30mm wide X 5mm thick PVC sheets bedding on either side

jointing together with solvent cement adsheve and addtional 5mm

thick PVC strip of 20mm width is to be stculk on interior side of the C

channel using PVC Solvent cement adsheve It is completion as per

direction of engineer in charge manufacture specification and

drawingncl, S.S fixtures and fastenings etc complete

Providing,laying and jointing in true line and level UPVC pipes ( sch-40 )

line including fittings make or equivalent as approved by engineer in

charge .pipe shall be fixed on the wall the help of clamp at every two

meter c/c or shall be concealed as directed including necessary fittings

etc.including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials a. 15mm Diameter

38 44.00 (2) 25mm dia 91.83 #NAME? RMT.

39 54.00 (3) 50mm dia 195.67 #NAME? RMT.

Providing and Erecting & fixing double coated syntex or equivalent PVC

40 2000.00 (ISI)mark water tank of required capacity each with all necessary fitting 3.95 #NAME? Liter

& connection etc.complete on terrace.

Providing and fixing screw down bib taps or following size:15mm

dia.Brass screw down bib tap polished bright.15 mm dia.

Providing and fixing to wall ceiling and floor PVC SWR pipes for

drain of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including

42 25.00 making good the wall ceiling and floor. 160 mm including necessary 662.56 #NAME? RMT.

fittings such as bends, shoes etc. including testing of pipe and joints

and fixing the same with abhesive solvent, including cost of all

Providing and fixing to wall ceiling and floor PVC SWR pipes for

drain of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including

43 27.00 making good the wall ceiling and floor. 110 mm including necessary 387.84 #NAME? RMT.

fittings such as bends, shoes etc. including testing of pipe and joints

and fixing the same with abhesive solvent, including cost of all

Provind and fixing 75m dia PVC cowl vent of ISI make of working

44 4.00 pressure 4kg sq.cm. with adhesive solvent cement etc. in true line 389.74 #NAME? No

and level etc. complete as directed by engineer in charge.(A)75 mm

Providing and fixing PVC swr Nanhi trape IS 14735 for drain 100 mm

diameter with jali of following nominal dia of self cleaning design with

45 6.00 CI screed down or hinged grating including cos of cutting and making 571.08 #NAME? No

good the walls and floors including providing and fixing 150mm x

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300 mm x 300 mm

size (inside) with standard wt. (I) square mouth trapes 150 mm x

mm size - P Type.

Providing and fixing white or coloured glazed china vitreious china

orrisa pattern water closet of size 580 x 440 mm including providing

and fixign vitreous china 100 mm size 'P' or 'S' trap including jointing

the trap with pan and soil pipe in CM (1:1) (

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (including plastic seat &

Cover ) white colour

Providing and fixing flat back wash basin 550 mm x 400 mm size of

first grade, white in colour with single hole for pillar trap with CI or MS

brackets painted with including cutting holes and making good the

same including providng and fixing CP brass waste coupline 32mm dia

49 3.00 including providng and fixing MI washer uinon 32 mm dia, including 2168.64 #NAME? No

providng and fixing 15mm dia pillar tap capsten head screw down high

pressure with screws, shanks and back nuts,including providing and

fixing waste pipe 15mm x 600 mm pvc inlet connection 15mm brass

screw down stop tap with necessary fititngs etc. complete

Providing and fixing stainless steel sink 1.00mm thick of size 460mm x

610mm 200mm with C.I. or M.S. bracket including fixing in wall of made

in good as directed including providing & fixing C.P. brass waste for

wash basin 32mm dia including providing & fixing M.I. fisher union for

wash basin 32mm dia including providing & fixing piller tap capstan

heal screw down high pressure with screws, shanles and back nuts of

50mm dia including PVC waste pipe and plastic connection etc.

Providing and fixing C.P. brass towel rail comoplete with C.P. brass

51 2.00 bracket fixed to wooden plug with C.P. brass screws (B) 600 x 20 mm 603.20 #NAME? No

Providing & fixing gun metal check or non-return full way wheel valve

of (A)25 mm dia.

53 2.00 (B)40 mm dia 663.42 #NAME? No

Constructing brick masonry chamber for under ground C.I. inspection

chamber and bends with bricks having crushing strength not less than

35 Kg./Sq.Cm in C.M.1:5 C.I. cover with frame (light duty) 455 mm x

mm internal dimension total weight of cover with frame to be not less

than 38 Kg. wt. of cover 23 Kg. & wt. of sizes frames 15 Kg. R.C.C. top

slab with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate,

mm size) foundation concrete 1:5:10 inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls & bed concrete etc. complete. (i) Inside diamension 455 mm x

610 mm and 450 mm deep for one or more inlets.

cleaning and grubbing of site area incl up rooting wild vegition grass,

bushees, shrubs, saplingsand tries girth up to 300 mm removal of

stumps of such trees cut earlier and disposal of un serviceble materials

and stacking of serviceble materials to be us

Provdg. and fixing chromium platedbrass half turn flush cock of

56 3.00 SAGAR,DELUX,ESSCO,GMT brands directed by engineer in charge(1) 25 1509.95 #NAME? No

Providing and fixing to wall, ceiling and floor 6.0 Kg f/cm2 working

pressure polythelene pipes of the following outside dia. Low density,

complete with special flange compression type fittings wall clamps etc.

including making good the wall, ceiling and floor110mm

Providing and fixing 90 cm high Stainless Steel railing made form

anticorisive 304 grade SS pipe of 50mm dia. (16 guage) as hand rail with

SS 304 grade baluster of 32mm dia. (16 guage) as pertical support fixed

58 12.00 in RCC slab at 1.2 mt. C/C including three horizontal SS pipe of 16mm 4027.88 #NAME? Rmt.

dia. (16 guage) at equal distance fixed by 16mm dia. (16 guage) SS pipe

with baluster including accessories as per detailed drawing as directed

Providing and fixing M,S. grills of required pattern to wooden frames of

windows etc with M.S. flats at required spacings and frame alround

59 776.40 square or round bars with 104.04 #NAME? KG.

round headed bolts and one coat of primer & two coat of paint nuts or

by screws (A) PLAIN GRILL

Boring holes 2.0 M. deep in ordinary soil(for cast in situ piles) and

60 53.00 disposal of the surplus excavated soil as directed within a lead of 50 M. 1303.88 #NAME? Nos.

for following diameter of piles. (iii) 250mm

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2-

coarse sand : 4- graded stone aggregates 20 mm nominal size) and

61 4.40 finishing smooth with,curing etc. complete including the cost of 11235.54 #NAME? Cu mt

formwork but excluding the cost of reinforcement for R.C.C work in (B)

COLUMNS: (i) Having cross-sectional area 0.05 to 0.08 Sq.M

Providing, fixing and construction of sandwitch type platform with

to18 mm thick marble pletform of uniform size and colour for top &

supports at 75 cm interval in Kitchen/Pantry/ Counter/ Laboratory etc

62 4.52 with fascia patty100 mm wide including necessary cement mortar 1:2 . 3822.85 #NAME? Sq.mt

Kota shall be fixed over 25 mm thick polised Kota bottom, cement

joints and pointing as specified with necessary making of round edges,

polishing curing etc.complete as per engineer-in-charge. (green Marble)

Providing and laying water proofing treatment on terrace including [A]

applying neat cement slurry @ 2.75 Kg/Sq.smt. of cement admixed with

water proofing compound as per instruction of cement concrete using

brick bats 25 to 100mm size with 50% of cement mortar 1:5 (1 cement

:5 coarse sabd) admixed with water proofing compound over 20mm

thick layers of cement mortar 1:5 to required slope including rounding

63 88.20 of junction of walls and slabs (C) after two daays of proper curing, 818.10 #NAME? Sq.mt

applying second coat of cement slurry at the rate of 2.75 kg/sq.mt. (D)

finishing the surface with china mosaic tilling in the white colour design

pattern as per shown by Engineer in charge over 20mm thick cement

mortar 1:4 (1 cemnt :4 coarse sand) and final finishing the surface with

white cement slurry (E) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

Providing and laying cupboard/ kitchen platform shutter by using

25mm x 37mm teakwood frame, 25mm thick approved quality

commercial plywood for shutter with 19mm x 3mm teakwood bidden

64 12.39 patting, one side 1mm thick good quality laminated sheet and other 4054.14 #NAME? Sq.mt

side good quality laminated sheet 0.80mm thick including necessary

fixtures and fastenings magnet including all material and labour etc.

complete as directed.

Providing and fixing 600 mm x 450 mm. Belvelled edge mirror of

65 3.00 superior glass mounted on 6 mm. thick. A.C. sheet or plywood sheet & 833.73 #NAME? No

fixed to wooden pluges with CP brass screw and washer.

Distempering with dry distemper of approved brand and manufacture

(two coats) and of required shade on wall surface to give an even

66 588.50 shade, over and including a priming coat of whiting after throughly 103.41 #NAME? Sq.mt

brooming the surface free from mortar dropping and other foreign

Applying two coats of birla or asian acrylic lappy putty and two coats of

primer of approved brand and manufacture on new wall surface to give

an even shade including throughly brushing the surface free from

mortar tropping and other matter and sand prepared smooth

Finishing wall with Acrelic emulsion paint (Apex only) on exterior wall

surface (two Coats) to give of an approved brand and manufacture and

even shade after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials. ( First Grade )

Providing cement vata (10 cm x 10 cm size) quarter round in C.M. 1:1 (1

69 37.30 cement : 1 fine sand) including neat cement finishing watering etc. 23.69 #NAME? RMT.

Drilling of 215mm dia. Bore in over burden strata (0-30) including

lowering and fixing of 175 mm nominal dia UPVC pipe/175 mm dia

ERW pipe upto required depth and further drilling of 165mm dia bore

hole in rocky strata by DTH rig..

71 40.00 Providing 175 mm dia. UPVC pipe CM type 763.67 #NAME? RMT.

Providing and supplying in standard length ISI mark high density

polythylene H.D.P.E. pipes suitable for potable water as per IS

specification no. 4984/1995 nclduing all local and centaral taxes,

transportation, freight charges, octroi, inpsection charages, loading,

unloading, conveyance to site of work. a) 40 mm dia H.D.P.E. Pipe PE-

Window & Door Design painting & patterns with oil paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Circle Design painting & patterns with oil paint of approved brand and

manufacture on undecorated wall surface to give an even shade

including thoroughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

Painting NHM Logo 26"x35" size & Ayushyaman bharat name size 18"

Height with oil paint of approved brand and manufacture on

75 1.00 undecorated wall surface to give an even shade including thoroughly 8488.04 #NAME? job

brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing pre-cast Rubber Dye inter locking concrete block

60mm thick with grade of concrete M30 pnumatic compressed by

76 28.00 mechanically pressedand as per aprooved design including 75mm sand 686.90 #NAME? sqmt

layer for levelling and filling the joint with sand in proper line and level.

Providing and laying Rubber tectile flooring for desable person anti skit

as per requirment and instructed by engineer incharge

Providing and Fixing Commander make grab bar made up of aluminium

alloy for Divyang toilet with EWC P or S concealed (710 X 370 X

mm),Cistern,cruse special soft close seat cover,internal fittungs,wash

78 1.00 basin 510 X 400 mm, Spatula lever faucet,Wall mounted grab bar 600 31261.40 #NAME? job

mm long , 2 nos. wall mounted hinged hand rail 750 X 100 mm with

bottel trap and paper holder with all require s.s fixture & fastening

which approved by Engineer incharge.(only CERA company make use)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single Rupees Four Hundred Forty

mounting base frame covered with textured/metallic/white and Paisa Ninety Eight Only

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type Rupees Seven Hundred Thirty

erected on PVC / Metallic/Wooden box, single mounting base Five and Paisa Five Only

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS Rupees One Thousand Two

81 13.00 PVC insulated multi strand copper wires up to 10 mtr length, 612.06 Hundred Forty Six and Paisa pt.

in below type of pipe erected complete with Modular type Ninety Two Only

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box, Rupees Two Thousand Seven

82 13.00 single mounting base frame covered with textured / 309.06 Hundred Five and Paisa Thirty pt.

metallic/white front plate modules erected on / in wall / Four Only

ceiling with following type accessories Cat. III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

Rupees Five Hundred Twenty

base frame covered with textured / metallic/white front plate

83 13.00 180.79 Eight and Paisa Twenty Three no.

modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat.III

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

Rupees Eighteen Thousand

base frame covered with textured / metallic/white front plate

84 13.00 199.98 Seven Hundred Thirty Eight no.

modules erected with necessary connections as per site

and Paisa Fifty Three Only

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat.III

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

Rupees Forty One Thousand

85 50.00 ceiling erected with necessary PVC fittings & Junction boxes 24.24 Mtr.

Thirteen and Paisa Seven Only

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (a)20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on Rupees Two Hundred Forty

86 115.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 78.78 Nine and Paisa Seventy Two mtr.

insulated stranded wire of green colour for earth continuity of Only

following sizes (A) With medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC Rupees Seven Hundred Thirty

87 145.00 insulated ISI marked stranded Copper conductor wire in 104.03 Three and Paisa Thirty Seven mtr.

following type of pipe to be erected concealed in /flushed on Only

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

Rupees Fifty Two and Paisa

88 75.00 2.5 sq. mm copper conductor FRLS PVC insulated stranded 140.39 mtr.

Ninety Seven Only

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (a)

Supplying and erecting Flexible PVC insulated multi strand

Rupees One Thousand Three

multi core 1.1 kv grade ISI marked copper wires of following

89 15.00 58.58 Hundred Forty One and Paisa mtr.

size to be erected as directed.(e) 1.50 Sq.mm 3 core round

Twenty Eight Only

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

Rupees Five Thousand Nine

mounting base frame covered with textured/metallic /white

90 5.00 1133.22 Hundred Eighty Three and no.

front plate,modules erected with necessary connections as

Paisa Forty Seven Only

directed1 no. 6A/16A universal plug-switch combined.3 nos.

6A Switch3 nos. 6A 5 pin Plug For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Rupees Four Hundred Thirty

Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K,

91 4.00 165.64 Seven and Paisa Eighty Nine no.

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A)

Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV, IP-

20, conventional 1 to 2 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Rupees Two Thousand Five

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

92 28.00 373.70 Hundred Eight and Paisa no.

Luminaire efficacy> 85 lumens/watt ,LED LED driver

Eighty Four Only

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet CAT-III

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed 160 to

Rupees One Thousand Eight

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

93 4.00 1871.53 Hundred Forty Six and Paisa no.

5700K,Uniformity ratio >0.45, Luminaire efficacy>

Seventy Nine Only

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between

the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (iii) above 24 to 36 watts Cat-lll

providing and erecting Miniature circuit breaker single pole

Rupees One Thousand Eight

6A to 25A suitable to operate on 240 V A.C. system and

94 20.00 123.22 Hundred Thirty Four and Paisa no.

having breaking capacity 10 KA to be erected in existing box.

Twenty Five Only

confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for

Rupees Four Thousand Three

lighting Load (B Curve) having 10 KA breaking capacity &

95 3.00 307.04 Hundred Thirty Six and Paisa no.

confirms to IS : 8828 in existing box having following

Ninety Four Only

capacity (A) 6 to 32 Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch for

Rupees Seven Thousand Nine

Lighting Load (B curve) having 10KA breaking capacity &

96 1.00 701.95 Hundred Ninety Seven and no.

confirms to IS :8828 in existing box having following

Paisa Eighteen Only

capacity(b)40 Amp. Cat.III

Supplying & erecting approved make Electronics Starter and

relay for air conditioners in ABS plastic moulded housing.

Company fabricated with bakelite terminal for connection with

silver coating bimetallic contact in switching device for o/p Rupees Five Thousand Five

97 3.00 with following features.(1) Low Voltage Protection below 130 975.66 Hundred Twenty Two and

V(2) High Voltage protection above 270 V(3) Overload Paisa Sixty Eight Only

protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time

chara-)(4) Indicating LEDs for AC on LV, HV, O/L, T/D(5)

With unique feature of 3 minute of time delay

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

Rupees Six Thousand Four

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

98 3.00 2913.85 Hundred Ninety One and Paisa no.

MCBs.(The DBs should be used of same company of MCB to

Thirty Seven Only

be used) suitable for(A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43)

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on Rupees Nine Thousand One

99 2.00 single phase 240 V,50Hz. having characteristic of quick action 2166.45 Hundred Eight and Paisa Forty NOS.

& tripping with all advance feature & do not incorporate any Eight Only

electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP Cat. III

Providing and erecting required size Aluminium strip for

Rupees One Hundred Four

100 4.00 earthing of H.T. , OCB / ACB / Transformer, LT panel board, 225.23 kg

and Paisa Twenty Only

Motors etc. using copper clamp.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

Rupees Nine Hundred Thirty

(A)(approved make OEM has to submit test certificate

101 2.00 4591.46 Five and Paisa Sixty Seven no.

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil Length of pipe

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to Rupees Twenty Two and Paisa

be laid on wall with necessary clamps or in existing trench / Thirty Six Only

pipe of following size of cables (B) 4 core 6 Sq. mm

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

Rupees Two Thousand Six

230 volt A.C. 50 Hz 1200 mm sweep complete having

103 15.00 1948.29 Hundred Sixty and Paisa Forty no.

3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by Engineer

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and Rupees Five Thousand One

104 15.00 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 108.07 Hundred Fifty Eight and Paisa no.

complete erected concealed in Ceiling with necessary Seven Only

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement Rupees Six Hundred Eighty

having locking arrangements with mounting clamp with nuts, Six and Paisa Ninety Only

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(C)150mm x

125mm x 100mm [deep]

Supplying and erecting B class Galvanized iron pipe having

Rupees Four Hundred Eighty

smooth finished bore of the pipe on both ends erected nuts

106 4.00 326.23 Five and Paisa Eighty One Mtr.

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.(D) 50 mm dia.

Providing and erecting water cooler having storage capacity

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚ C

Rupees Six Hundred Seventy

within a hour, The water cooler should be comprising of

107 1.00 54515.76 Four and Paisa Sixty Eight no.

hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

Rupees Five Hundred Ten and

108 1.00 filter suitable buster DC pump capacity 80 psi, mention with 15620.66 NO.

Paisa Five Only

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

Supplying and erecting Direct On-line Electronics Starter with

2-5/4-10/8-14/10-16 Amp. Rating relay (variable current

setting) directly operated in totally insulated elegant enclosure

and 18 Amp. Rating power relay with start - stop button for Rupees Seven Hundred Forty

109 1.00 single phase operation up to 3 HP as per complete erected on 1603.88 Five and Paisa Thirty Eight NO.

P.W. Block with following features. Low voltage cut off below Only

140 V High voltage cut off above 280 V Overload protection

Indicating LEDs for motor on lv, hv & overload tripping.

S.I.T.C. of single phase submersible pump set suitable for

mm size or more dia bore well having motor capacity and

Rupees Two Hundred Fifty

discharge as under with necessary panel box. Lifting and

110 1.00 20224.24 Seven and Paisa Fifty Five ea.

Lowering taken extra. (c) Motor rating 2 HP (17 stage) pump

having capacity of 106 LPM at 40 mtr head suitable for 32 mm

dia. delivery pipe Cat.II

Providing and erecting ISI marked PVC insulated PVC

Rupees One Hundred Sixty

111 35.00 Sheathed Flat flexible Submersible copper cable approved 104.03 Mtr.

and Paisa Fifty Nine Only

make of following Size. (B) 3 Core x 2.5 Sq. mm.

I/We am/are willing to carry out the work at ..……..% below (percent should be written in figures and words) of the estimated rates mentioned

above. Amount of my/our tender works out as under.

*Estimated amount =4854357.00 *Estimated amount =4854357.00

Put to tender Rs. 4854357.00 Put to tender Rs.4854357.00

Deduct Below Rs. Add % Below Rs.

Net Rs. Net Rs.

*(please strike out whichever is not applicable)

1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions,

site, moisture, weather etc.

4 To be continued on additional sheets, if found necessary.

Dy. Executive Engineer Dy. Executive Engineer (ele) Divisional Accountant Executive Engineer

PIU Zone-7 Surat PIU Zone-7 Surat PIU Zone-7 Surat PIU Zone-7 Surat