Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC H NO 786 ANAND VIHAR COLONY PILIBHIT BYPASS BAREILLY UP PIN 243005 | BAREILLY | UTTAR PRADESH | 243005 | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹30.8 L+₹3.3 L (12.2%)Rejected-Finance 121 BEHARIPUR MEMARAN BAREILLY UP PIN 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹34.9 L+₹7.4 L (26.7%)Rejected-Finance 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹38.8 L+₹11.3 L (40.9%)Rejected-Finance | L4 | Rejected-Finance Not being L1 |
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Shilpam Bharali
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8763 ADDN, ALTN TO OPS COMPLEX AT 259 SU AT AF STATION BAREILLY
2023_MES_627674_1
8763/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D
Category a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹87,200
Yes
3 Jan 2024
9 Nov 2023
13 Dec 2023
9 Nov 2023
11 Dec 2023
23 Nov 2023
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.
Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing liquid water proofing compound, work at heights up to 12m from GL including all necessary scaffolding arrangement complete all as specified and as directed. [Note: Supply only water proofing compound shall be measured and paid separately]
All as per Item No. 4 herein before but with and including fixing chicken mesh wire netting 25 gauge, 20mm mesh
M&L for rendering 15mm thick in CM (1:6) in patches n.exc. 3sq.m. each patch on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound. [Make: Conplast X421 IC of make: M/s Fosroc Chemicals India (P) Ltd. or equivalent in M/s Pidilite Industries Ltd./ M/s Sika India Pvt. Ltd./ M/s Structural Water Proofing Co. Pvt. Ltd./ M/s BASF India Ltd.]
M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.
M&L for applying a priming coat of exterior primer over new or untreated plastered surfaces with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, and applying two coats of weather proof exterior emulsion paint of five different shades in camouflage pattern (Specific pattern as directed by Engineer-in-Charge) by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed
M&L for preparation of new or untreated plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed
S&F Vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminised hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed
S&F PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed.
S&F in repairs vitreous china urinals half stall type complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement all as specified.
S&F PVC connection 15mm size 600mm long with PTMT nuts on both sides.
S&F Stop valves/ Angle valve, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed
S&F Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.
S&F second class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed
S&F 40mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides all as specified
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.
S&F 100mm long cold rolled MS butt hinges medium weight.
S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.
S&F 150mm extruded aluminium alloy tower bolts extruded sections anodized complete all as specified and as directed.
M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified
M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
M&L for treating small article such as hold fast etc area n.exc 0.1 sq.m each with tar or coal tar black paint complete all as specified and as directed.
S&F Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm all as specified and as directed
M&L for stainless steel sheet 0.80mm thick, 304 L grade, polished, No 1 poly coated fixed in wall cladding, gate covering etc complete including necessary cutting, bending, punching, drilling, SS welding, buffing etc complete all as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work.
M&L for providing and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225: 1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (Part-4), fire performance as per BS:476 (Part 6&7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518 : 1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sq.m including both sides) comprising of main T runners of size 24x32mm of length 1200mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x600 mm suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sq.m) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm c/c and 40mm long dry wall/ partition with the help of plastic rawl plugs at 450 mm c/c and 40mm long dry wall S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.
M&L for providing and fixing Perforated particle board/ tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with staples on snap grid Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c. The grid shall be suspended by hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for providing precast cement concrete louvers and jallies, type B0, 1:2:4 (12.5mm graded aggregate), 25mm thick (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and as directed.
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified.
M&L for hardcore with broken stone or boulders of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface.
M&L for PCC 100mm thick type D2 (1:4:8) using 40mm graded aggregate as in sub-base for flooring/ hard standing complete all as specified.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.
M&L for PCC 100mm thick type B1 (1:2:4) using 20mm graded aggregate as in hard standing/ flooring complete finishing even and smooth without using extra cement all as specified.
Excavating in post holes (or similar holes) each n.exc. 0.5cu.m., getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering, and removing surplus soil to a distance n.exc. 50m and making good surface in soft/ loose soil all as specified.
M&L for plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.
M&L for rolled mild steel work as in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe.410-W. (Gde-E-250, Quality-A) complete all as specified.
M&L for steel work in tubular trusses, posts etc. (any size/ shape and fixing at any height) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for pre-polished coloured chequered cement concrete tiles of size 300x300mm, 25mm thick, set, jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in CM 1:4 complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L for Steel rolling shutters using 1.25mm thick laths, with ball bearing, as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
S&F ball bearing for rolling shutters complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.
Dismantling wooden boarding, any description, fixed in any position with nails
M&L for 2nd class hard wood boarding 40mm thick in floors/ skirting, planed on one side with butt joints fixed with screws complete all as specified
M&L for Rubber sheet 2.5mm thick with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified
S&F powder coated aluminium (minimum thickness of powder coating 50 microns) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. complete all as specified and as directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 microns) work for door shutters, with aluminium sections of minimum 3mm thick and weight not less than 2.05kg/m for side rails, 2.646kg/m for top & bottom rails and 3.116kg/m for lock rail, including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminium snap beading screw etc. complete all as specified and directed by Engineer-in-charge. Note: Glass/ particle board panel inserts/ grill shall be measured and paid separately
S&F 5.50 mm thick sheet glass (tinted/ reflective type) of any size complete fixed to aluminium frames
S&F 12mm thick pre-laminated particle board, interior grade, pre-laminated on both sides with decorative choice lamination, fixed with screws to timber frame work all as specified.
S&F aluminium powder coated grill of weight not less than 1.5kg/Sq.m fixed to aluminium frame with aluminium powder coated beading complete all as specified and as directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
All as per Item No. 60 herein before but without glazing bars
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 all as specified and as directed.
S&F 5mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete work at height up to 10mtrs all as specified and as directed.
Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.
Disconnecting and taking out MCB DBs of any capacity including MCBs complete all as specified.
Taking down carefully existing sub-main wiring of any description complete all as specified.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
All as per Item No. 68 herein before but for one 3 pin 6 Amp socket out let point on independent board.
All as per Item No. 68 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.
All as per item No. 68 herein before but point wiring with 2.5 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade duly earthed with same cable as for wiring above and green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.
M&L for taking down exhaust fan of any sweep, cleaning the complete fan and applying a spray coat of synthetic enamel paint and writing MES No. on fan, re-fixing the fan to its position including replacement of twin core copper wire 23/0.0076 from fan connector to ceiling rose complete all as directed. [Note: The fans shall be kept in safe custody of contractor during the repairs to building and refixed when ordered by Engineer-in-Charge]
Taking down old serviceable LED tube light/ mirror light fitting of any type, keeping in safe custody during repairs to building and refixing the same including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 sq.mm, 3 core, 1100 Volts grade, from light fitting to ceiling rose complete all as specified and directed.
S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Philips Cat Part No : BN100C LED20S-6500 PSU L120 GR S4/ Havells Cat Part No : STOUT PLUS 600BS 20W LED 857SPCWH/ Wipro Cat Part No : Wipro Garnet 20W LED Batten (White) D532065
S&F recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]
S&F Exhaust fan 300mm sweep, single phase 230V AC, 900 RPM metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm complete including taking down existing unserviceable fan and handing over to MES stores complete all as directed.
S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.
S&F single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.
M&L for sub main wiring concealed complete with two runs of single core 4 sq.mm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. including provision of earth continuity wire with same cable as for wiring but in green colour all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
M&L for sub main wiring concealed complete with two runs of single core 6 sq.mm (nominal area) 1100 volt grade single core PVC insulated unsheathed cable with multi-stranded copper conductor of FRLS grade (IS:694) drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. including provision of earth continuity wire with same cable as for wiring but in green colour all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
S&F sheet steel powder coated distribution board Vertical type TPN 4 ways, 415 volts, with 200 Amps rated copper bus bar, neutral link, earth bar, IP 43 protection and double door, suitable for mounting MCCB up to 160 Amps as incomer and MCBs as out going complete including grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. [Cat No. 5077 45 of make Legrand/ Cat No. DBVTH004DD of Make: L&T]
S&F MCCB 125 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified and directed.
S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.
S&F switch piano, flush type 5/6 Amps, one way, 230V AC
S&F bell push piano, flush type 5/6 Amps, one way, 230V AC
S&F switch piano, flush type 15/16 Amps, one way, 230V AC
S&F socket outlet 2 in 1, 6 Amp, 5 pin, 230V AC
S&F socket outlet 2 in 1, 5/6 & 15/16 Amp, 6 pin 230V AC
S&F Angle Holder, insulated body with back plate with & including LED Lamp 9 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.
Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 30,118.00
M/s M Aali construction co
Shikhar ji Enterprises
M/S Quality Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .