Bargal Kafulta GOV Pumping Water Supply Scheme

Amount

Designing, Providing, Constructing, Hydraulic testing, commissioing and giving satisfactory dicharge of 450 lpm, clear water capacity, 6.0m dia and 9.0 m mimimum depth Infiltration well with all apurtents works as per type approved design and drawing.

Supply of all Materials , Labours ,T&P etc. and Construction of RCC Reservoir of following capacities (In Kiloliters) supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. Complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of verticle pipes and specials assuming bearing capacity as 8MT/M2 .

Sump 10 Kl

Supply of all Materials, Labours,T&P etc. and Construct a Pump House With Size (3.50 m x 4.50 m x 3.60 m) along with attendent Room cum Chloronome in size (2.50 m x 1.30 m) as per Approved Design and Drawings, including Cost of all Labour & Fitting all Complete.

Pump House With Size (3.50 m x 4.50 m x 3.60 m)

Supply of all Materials , Labours ,T&P etc. and Construct Following Staff Quarter as per Approved Design and Drawigns, Including Cost of all Labour & Fittings all Complete as per detailed specification for civil, electrical components. Type -I , Single Room Staff Quarter including Kitchen ,W/C ,Bath etc Complete.

Supply of following sizes MSERW pipe conforming to IS 1978-198, YSt 210 grade , carting to site of work, cutting of pipes, to make suitable length according to site conditions and for fabricating bends of suitable size and angle by Gas cutter . Jointing of pipes by but welded joints (fabrication work)as per IS: 816-1969 (Welding) & IS: 814 (part 2)-1974(Electrodes) ,including supply of all electrods and gas for cutting and welding ,hiring ,carting of all etectric generator ,welding and cutting equipements etc complete , laying of pipe line true to alignment and as per direction of Engineer-in-charge after painting one coat of anti corrosive paint and testing of pipe line after complition of work. (IS:5822-1986)

MSERW pipe ,80 mm dia x4.8mm thick .

MSERW pipe ,80 mm dia x5.5mm thick

Providing of all materials, Carting , laying & jointing fixing and testing of G.I screwed pipe with specials in trenches (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (Medium quality) in trenches with cutting, threading etc complete. Confirming ISI 1239(Part-1)

125 mm dia

100 mm dia

80mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

20 mm dia

Exacavating trenches of required depth for laying MS.ERW/G.I(M) pipeline ramming of bottoms, depth upto 1.5 m including getting out the excavated soil & then refilling the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc and disposal of surplus excavated soil as directed within a lead of 50 m.

soil mixed with single boulders

Ordinary Rock

Cartage of following sizes of sluice valves,lowering them into trenches and fixing the same on water supply line including cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember. Confirming to IS: 14846-2000

125mm dia (P.N 1.0)

100mm dia (P.N 1.0)

80mm dia (P.N 1.60)

80 mm dia (Brass/G.M. Valve)

65 mm dia (Brass/G.M. Valve)

50 mm dia (Brass/G.M. Valve)

40 mm dia (Brass/G.M. Valve)

32 mm dia (Brass/G.M. Valve)

25 mm dia (Brass/G.M. Valve)

20 mm dia (Brass/G.M. Valve)

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore (Vertical)

80mm dia (P.N 1.60)

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

80 mm Dia

Constructing masonry Chamber for sluice valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (0.9x0.9x0.90)

Construction of Gate Valve Chamber including supply of materials, labours, T&P etc required for proper completion of work. (0.45x0.45)

Construction of Air Valve Chamber including supply of materials, labours, T&P etc required for proper completion of work. (0.45x0.45)

(a) Construction of following sizes R.C.C. 1:1.5:3 for construction of thrust block at bends in pipeline including supply of all materials, labour, T&P etc complete. 0.60mx0.60mx0.6m (for 22.5° bend), 0.75mx0.75mx0.75m (for 45° bend) 0.90mx0.90mx0.9m (for 90° bend)

(b) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars

Centring and shuttering including strutting,ropping etc. and removal of form for Centring and Shuttering for Suspended floors, roofs, landings,balconies and access platform.

Supply of all materials, labours, T&P etc and construct block / brick masonry 1.5m high boundary wall. As per approved drawing.

Supply of all labour, materials, and T&P etc and privide 3.6 m wide M.S. gate wicket with pillars as per departmental type design, at proposed water works site.

Supply of all materials,labours, T&P etc.and construct RCC stand post as per type design complete.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation cutting works including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. For Approach road along Rising main alignment

Dismantling and reinstatement of PCC road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Construction of Random Rubble Stone Masonry wall for safety of main structural works like pipeline, reservoir & Intake works including supply of all material, labour, T&P and royaltiies etc complete as per pwd specifications.

Laid in 1:6 (cement: sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8

S.I.T.C. of Submersible Pumping Plant with Accessories for Infiltration well

Supply of Submersible pump and motor set: 310 L.P.M. discharge at 40mts. NEH.

Supply of control panal cum starter (one incoming & two outgoing) as per spacification .

Supply of Main piping and valves as per specification.

Supply of of 4sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of chain pulley 2tonne capacity, 4 Mt. lift, tested on 3.0tonne load.

Supply of Electronic type liquid chlorine dosing system

Supply of Chlorine Testing Kit

Supply of Liquid Chlorine (50Kg Cane)

Supply of Gauges as per specification

Earthing of pumping plants and including supply of all materials and labour etc complete in all respects.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of tools

Supply of Chain wrench 80 mm size

Supply of 63Amp. TPN Main Switch

Installation commissioning and testing

Painting

Trial Run & Maintenance for six Months

Carting of pumping plant upto site Infitration well

Internal & External Electrification of Pump house

Wiring for light point/fan point, exhaust fan point, call bell point with15.sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc, as reuired.

Wiring for circutit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2x2.5 sq. mm +1x2.5sq.mm earth wire

2x4 sq. mm +1x4sq.mm earth wire

supplying and fixing following piano type switch/scoket on the existing switch box/cover including connections etc. as required.

5/6amps switch

3pin 5/6 amp socket outlet

supplying and fixing metal box of 150mm x75mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

supplying and fixing metal box of 180mm x100mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F 3 pin , 5 amp celling rose on the exting junction box/wooden block including connection etc, as required.

S/F brss batten, angle holder including connction etc, as requird.

supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribuiton board, 240v, on surface/recess, complete with tinned copper bus bar , neutral bus bar, earth bas, din bar, interconnections, power painted indulding earthing etc. as required (But without MCB/RCCB/Isolator)

S/F 5 amps to 32amps rating, 240/415 volts, "C" curve, mainature circuit braker suitable for inductive load of follwing poles in the existing MCBDB compete with connection, testing and commissioning etc. as required.

Single Pole

Double Pole

S/F Security light LED Type, 40 watts with bracket, clamp, connection etc compete in all respect

S/F 23 watts CFL

S/F of LED T_5, 18 watts tubelight fitting connection etc, compleat in all respect

S/F of exhaust fan (i.s.i mark) with jali, 450mm sweep, including making hole for exhaust fan and connection etc, complete in all respect.

S.I.T.C. of Centrifugal Pumping Plant with Accessories for Stage-1st

Centrifugal Pump Set

Supply of High head multistage horizontal Centrifugal pumping plant capable to deliver 310LPM at 320Mts. Head. Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. Supply of M.S. fabricated base plate for above pump and motor set, coupling and coupling guard.

Supply of Fully automatic Auto Transformer starter as per Specification.

Supply of Control Panel as Per Specification

Supply of Power Wiring material as per Specification.

Supply of Earthing material as per Specification.

Supply of Main piping and valves as per specification.

Supply of pressure Gauges and compound gauge with fittings as per specification

Supply of Tools.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of 250Amp. TPN Main Switch

Supply of of 100KVA automatic voltage regulator (compact) servo controlled stablizer with all accessories as per spacification .

Installation

Commissioning.

Testing of pumps at manufacture workes and site

Painting

Trial Run & Maintenance for six Months

Carting of pumping plant upto site Stage-1st

Internal & External Electrification of Pump house

Wiring for light point/fan point, exhaust fan point, call bell point with15.sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc, as reuired.

Wiring for circutit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2x2.5 sq. mm +1x2.5sq.mm earth wire

2x4 sq. mm +1x4sq.mm earth wire

supplying and fixing following piano type switch/scoket on the existing switch box/cover including connections etc. as required.

5/6amps switch

3pin 5/6 amp socket outlet

supplying and fixing metal box of 150mm x75mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

supplying and fixing metal box of 180mm x100mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F 3 pin , 5 amp celling rose on the exting junction box/wooden block including connection etc, as required.

S/F brss batten, angle holder including connction etc, as requird.

supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribuiton board, 240v, on surface/recess, complete with tinned copper bus bar , neutral bus bar, earth bas, din bar, interconnections, power painted indulding earthing etc. as required (But without MCB/RCCB/Isolator)

S/F 5 amps to 32amps rating, 240/415 volts, "C" curve, mainature circuit braker suitable for inductive load of follwing poles in the existing MCBDB compete with connection, testing and commissioning etc. as required.

Single Pole

Double Pole

S/F Security light LED Type, 40 watts with bracket, clamp, connection etc compete in all respect

S/F 23 watts CFL

S/F of LED T_5, 18 watts tubelight fitting connection etc, compleat in all respect

S/F of exhaust fan (i.s.i mark) with jali, 450mm sweep, including making hole for exhaust fan and connection etc, complete in all respect.

S.I.T.C. of Centrifugal Pumping Plant with Accessories for Stage-2nd

Centrifugal Pump Set

Supply of High head multistage horizontal Centrifugal pumping plant capable to deliver 310LPM at 385Mts. Head. Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. Supply of M.S. fabricated base plate for above pump and motor set, coupling and coupling guard.

Supply of Fully automatic Auto Transformer starter as per Specification.

Supply of Control Panel as Per Specification

Supply of Power Wiring material as per Specification.

Supply of Earthing material as per Specification.

Supply of Main piping and valves as per specification.

Supply of pressure Gauges and compound gauge with fittings as per specification

Supply of Tools.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of 315Amp. TPN Main Switch

Supply of of 150KVA automatic voltage regulator (compact) servo controlled stablizer with all accessories as per spacification .

Installation

Commissioning.

Testing of pumps at manufacture works and site

Painting

Trial Run & Maintenance for six Months

Carting of pumping plant upto site Stage-2nd.

Internal & External Electrification of Pump house

Wiring for light point/fan point, exhaust fan point, call bell point with15.sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc, as reuired.

Wiring for circutit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2x2.5 sq. mm +1x2.5sq.mm earth wire

2x4 sq. mm +1x4sq.mm earth wire

supplying and fixing following piano type switch/scoket on the existing switch box/cover including connections etc. as required.

5/6amps switch

3pin 5/6 amp socket outlet

supplying and fixing metal box of 150mm x75mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

supplying and fixing metal box of 180mm x100mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F 3 pin , 5 amp celling rose on the exting junction box/wooden block including connection etc, as required.

S/F brss batten, angle holder including connction etc, as requird.

supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribuiton board, 240v, on surface/recess, complete with tinned copper bus bar , neutral bus bar, earth bas, din bar, interconnections, power painted indulding earthing etc. as required (But without MCB/RCCB/Isolator)

S/F 5 amps to 32amps rating, 240/415 volts, "C" curve, mainature circuit braker suitable for inductive load of follwing poles in the existing MCBDB compete with connection, testing and commissioning etc. as required.

Single Pole

Double Pole

S/F Security light LED Type, 40 watts with bracket, clamp, connection etc compete in all respect

S/F 23 watts CFL

S/F of LED T_5, 18 watts tubelight fitting connection etc, compleat in all respect

S/F of exhaust fan (i.s.i mark) with jali, 450mm sweep, including making hole for exhaust fan and connection etc, complete in all respect.

M/s Kashmirilal Constructions Pvt. Ltd.