GE-K-62-2023-24 REPAIR MAINT TO FLOORING, PAINTING, ROOFING, PLUMBING SANITARY FITTING AND OTHER BR WORKS AT KARGIL WAR MEMORIAL AND CERTAIN PLACES AT DRASS UNDER GE KARGIL

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

Supply & fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Supply & fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed by Engr in charge.

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises., complete all as specified and directed by Engr-in-Charge.

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick, plain cement concrete, type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick plain cement concrete type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor complete all as specified and directed.

M & L for Joint free Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:4, complete all as specified.

M&L Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile all as specified and as directed

M&L Vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles exc 0.42 and n.exc 1.00 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile all as specified and as directed

M & L for endura tiles, heavy duty type of size 300x300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade completed all as specified and as per direction of manufacturer instructions / Engr in charge.

M & L for Coloured Glazed ceramic tiles of size 300x450x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed

M & L for chequered cement concrete tiles 30x30x25mm thick with grey cement and pigment and set jointed and pointed in neat cement slurry as in floor over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed . (Note- Sand cushion shall be measured and paid separately)

M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr in charge.

M & L for granite work (table rubbed and polished) 18-20 mm thick as in steps,jambs, pillars, platforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding, polishing and moulding over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M & L for makrana doogri marble slab work 18-20 mm thick table rubbled and polished in steps , jambs, pillars , plateform and like laid over cement slurry & 20 mm thick screed bed in CM 1:4, jointed and pointed with white cement and pigment, complete all as specified and directed

M&L for pre-polished cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in CM 1:4 laid over cement slurry, pointed and jointed with grey mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for rubbing and treating kota stone / marble slab surfaces with mirror polishing including cleaning etc complete all as specified and directed

Dismantling of the existing dholpur stone slab of any description and Fixing only incl cutting/ grinding except supply of material (Dholpur stone slab will be supplied by the deptt) with cement slurry & over 20 mm thick screed bed or bedding layer in CM 1:4 & jointed and pointed with white cement and pigment complete all as specified and directed

Dismantling of the existing dholpur/RCC jali/jaffri and Fixing only with CM 1:3 except supply of material jali/jaffri (Dholpur stone jali/jaffri will be supplied by the deptt) & jointed and pointed with white cement and pigment as per existing similar at site complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 15 mm thick in CM 1:6 on other fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for preparationof new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M & L for preparation of new wall surfaces and applying two or more coats of premium acrylic exterior emulsion paint over a coat of wall care putty complete all as specified and directed.

M & L for preparation of old treated wood based surfaces by sizing & applying wood filler , staining with oil/spirit incl under coating and finishing coat with synthetic varnish complete all as specified and directed by Engineer-in-charge.

M & L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L preparation of old painted plastered or concrete surfaces of any description and applying two coats synthetic enamel paint complete all as specified and as diected

M & L for preparation of old plastered or unplastered surfaces of walls and applying two coat of cement base paint , complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment from wall surface and applying two or more coats of premium acrylic emulsion exterior paint over a coat of wall care putty complete all as specified and directed by Engr-in-charge.

M & L for preparation of old wall surfaces and applying two or more coats of premium acrylic exterior emulsion paint complete all as specified and directed.

M& L for preparation of existing treated old surfaces of chequered tile,interlocking tile or stone floor etc and applying two coats of floor paint (Make : Indigo or equivalent ) of specified tint complete all as specified and directed.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section in framed work, in any position complete all as specfied and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed

Supply & Fixing for suspended false ceiling system using chicago metallic (E Grid) exposed suspended system, grid section size 600mm x 600 mm, comprising of GI powder coated Main Runner of diamensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 + PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.4 + PPPCGS /0.3 mm & weight of Tee of 0.195 kg for 600mm length) and wall angle of diamensions 22.2mm x 22.2mm x 3050 mm x 0.65mm thick (Thickness comprissing of GI/0.35 + PPPCGS/0.3mm & weight of angle 0.70Kg for 3050mm length) with grid system duly suspended with 4mm dia GI wire hangers fixed with steel-through fastener from purlin of the roof complete all as specified and directed.

Providing and fixing 12 mm semi perforated calcium silicate tile size 600X600 mm complete all as specified and as directed

M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed

M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed

M&L factory made second class soft wood wooden battens kiln dried spruce or pine profiled lumber, not less than 12mm thick, length 3000 mm & width 110-120 mm insert each other with male and female grooves fixed with nails to timber frame work as in wall/ceiling panelling, shelves etc including dismantling old wall/ceiling board any type and applying under coating and finishing coats of wood polishing complete all as specified and directed (Make-Beliy Ruchey or equivalent)

M&L laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one complete all as specified and as directed.

Supply & Fixing in repair 10 ltr PVC valveless,syphonic action type , flushing cistern , low level,white , with inlet , ball valve , float and handle incl brackets complete all as specified and directed.

Supply & fixing in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

Supply & fixing in repair 15mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed.

Supply & fixing in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

Supply & fixing in repair Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to P or S trap with integral foot rest but excluding flushing cistern and flush pipe including placing in position complete all as specified.

Supply & fixing in repair vitreous China half stall urinal complete all as specified and directed

Supply & fixing in repair vitreous china urinal partition white of size 310x700 mm complete all as specified and directed

Supply & fixing in repair vitreous china wash hand basin white counter type 570x450mm fixed on granite slab incl waste pipe, cutting for erecting granite slab, complete all as specified.

Supply & fixing in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified by Engr-in-charge

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and including white plastic water closet seat cover with mild steel CP or aluminisied hinging device complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair CP health faucet with 1 meter flexible hose and stand all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair 15mm bore Pillar taps cast copper alloy, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed.

Taking up or down steel water tubing of 15mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed.

Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed.

M&L for 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M&L for 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Note : Deduction for amount of Rs 16,500.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S JAMSHEED ALI CONSTRUCTIONS

M/S TRADE LINK

M/S ULTRA INDUSTRIES

M/S WELDED IRON FABRICATROS