SPECIAL REPAIR TO BUILDING NO NP/11 AND NP/34 IN MES COMPLEX, PROVISION OF HISTORY AND LAYOUT WALL AT RESPECTIVE RWAs AND PROVISION OF 01 X SERVER ROOM FOR MTN BDE SIG COY NEAR BUILDING NO 1/8/15 AT BINNAGURI MILITARY STATION UNDER GE NORTH BINNAGURI

Amount

Taking down Chowkats or frame exc 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the frame including iron mongrey complete all as specified and as directed.

Taking down frame n.exc 1.5 Sqm each without taking off shutters from the frame including iron mongrey complete all as specified and as directed.

S&F of pressed steel framed for door with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm, including one shop coat of primer complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of factory made 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.

S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction, specification complete all as specified and as directed.

S&F of stainless steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F of aluminium handles cast type anodised 150mm of size complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified complete all as specified and as directed.

S&F of 200 mm long aluminium anodised barrel tower bolt of extruded section and as directed complete all as specified and as directed.

S&F in repair Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

M&L for mild steel framed work such as grills/guard bars, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height copings, kneelers, apex stones, bed plates, kerbs etc including necessary form work as required complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick works with fly ash brick straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick walls or concrete surfaces in two layer 10mm thick 1:6 and 5mm thick 1:4 in mixed with water proofing compound @2% by weight of cement or as per manufacturer instructions on top layer, finished even & fair without using extra cement all complete as specified and as directed. Note: WPC shall be measured and paid separately.

M&L for rendering 5 mm thick cement plaster on ceiling in cement mortar (1:3) finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Material & Labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new plastered surface over 2 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly ceiling plastered surfaces and applying three coats of white/colour wash on ceiling complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying wall care putty as necessary (multipurpose mixture shall be used for uniform and proper mixing of putty) and applying two or more coats of exterior acrylic emulsion paint on external surface of wall/chajja/facias by auto roller over a coat of primer complete all as specified and as directed and as per manufacturers instruction.

M&L for one coat of white/colour wash on old surface of wall after Washing, rubbing down and stopping of distempered and painted surfaces with brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for one coat of white/colour wash on ceiling of old surface after Washing, rubbing down and stopping of distempered and painted surfaces with include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and using screed bed of 15 mm thick cement mortar 1:6 complete all as specified and as directed.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed

M&L for Diamond cut kota stone slab flooring 18-20mm thick, polished (mirror finish), crack resistance, optimum strength, cut to required size, having excellent stone resolvability, non-slippery, tough etc over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete with screed bed or bedding layer of mortar 20 mm thick for laying the same in cement mortar 1:6 complete all as specified and as directed.

M&L for machine cut kota stone riser/skirting 18-20mm thick, polished (mirror finish), crack resistance, optimum strength, cut to required size, having excellent stone resolvability, non-slippery, tough etc over 15mm thick rendering using cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and as directed.

M&L for glazed ceramic coloured tiles/digital elevation tiles in vertical surfaces 300x450x7mm/450X 350X 7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match and using 10 mm thick cement mortar 1:4 complete all as specified and as directed.

M&L for 25mm thick prepolished and chemically treated smooth finish exterior grade coloured chequered tile as in path and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meters and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D2 1:4:8 with 40 mm graded stone aggregate as in sub base to receive a surface complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage triple layer (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I complete all as specified and as directed.

S&F in repair of ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.

S&F in repairs 15 mm dia Bib tap fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe complete all as specified and as directed.

S&F in repairs of Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75mm/100mm, plain with grating including jointing with solvent cement as in repair complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

Supply and Fix in repairs 15 mm bore pillar taps, capstan head, cast Copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap complete all as specified and as directed.

M&L for PVC water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of required length etc complete all as specified and as directed

S&F in repair vitreous china half stall type urinal with grating and union for discharge pipe including connecting pipe & waste pipe with coupling, Urinal Spreader complete all as specified and as directed.

S&F in repair 15 mm dia brass chromium plated angle cock with flange complete all as specified and as directed.

S&F as in repair towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms) complete all as specified and as directed.

S&F Stainless steel Towel ring as in repair including Chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S & F of Polycarbonate wall mounted soap dish as in repair fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F as in repair CP health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position and hook complete in all respect complete all as specified and as directed.

M&L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC nominal mix type B1 (1:2:4) using 20 mm graded stone aggregate as in Column/ Beam etc complete all as specified and as directed.

M&L for RCC type B1 (1:2:4) using 20 mm graded stone aggregate as in fins, fascias, louvres, parapets, and railings , newels, balustrade & the like complete all as specified and as directed.

Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat complete all as specified and as directed.

S&F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F for prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for prepainted galvalume aluminum zinc coating GI based Plain or curved crimped steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drawing No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed and wire gauged shutter including all fittings and fixtures like MS hold fast, box type hinges, Handles, MS Tower Bolts, Stoppers, MS guard bar/grill etc complete including one shop coat red oxide zinc chrome primer complete all as specified and as directed. Notes:- (a) Window with double shutter i.e. glazed shutter & gauged shutter including grill/guard bar with all fittings & fixtures shall be measrued as one unit and no extra shall be measured and paid separately. (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of Sch. (c) The Drawings referred above are available in the office of Engr-in-Charge and can be referred in the office working hours if required.

S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars including taking down of old steel ventilators of any size complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of FI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm and Web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with FI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mm length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, taking up/laying under ground cable etc. and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated soils not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2(using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for hard core, broken boulders to gauge n.exc 63mm complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2 1:3:6 with 40 mm graded stone aggregate as in path etc finishing the surface even and fair without using extra cement complete all as specified and as directed.

M&L for heavy duty exterior tiles 15 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm set, jointed and pointed in neat cement slurry over in pavement/footpath/floors including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

S&F for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for PCC 1:2:4 type B-I (using 20 mm graded stone aggregate) as in coping /benching to sides of foot path fininished fair and even without using extra cement etc complete all as specified and as directed.

M & L for 20mm thick Jet Black Granite (of any type) tiles machine cut, in skirting/ dado/vertical surface laid over cement screed/backing coat and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 15 mm thick cement plaster (1:4) complete all as specified and as directed.

Surface dressing n.exc 15 cm deep and getting out soft/loose soil complete all as specified and as directed.

M & L for preparing new plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of white wash on plastered surfaces complete all as specified and as directed.

M&L for RCC design Mix M-25 grade as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC design Mix M-25 grade as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC design mix M-25 grade as in column, pillars, piers posts and struts etc complete all as specified and as directed.

M&L for RCC design mix M-25 grade as in lintel beam etc complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

All as per item Ser No 109 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F powder coated anodized aluminium door made out of hollow extruded aluminium sections weighing not less than 1.25Kg/RM for chowkat and door frame including each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 01 No mortice lock of six levers with key in duplicate regulated by double action hydroulic floor door spring, shuttter to be pately glazed with 5mm thick tinned glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading/gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame complete all as specified and as directed.

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter) aluminium sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

M&L for vitrified ceramic tiles 7-8mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match surface tiles over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match as in floor complete all as specified and directed.

M&L for vitrified ceramic tiles 7-8 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, as in skyrting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match surface tiles complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layres in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying roof treatment, finished even and fair without using extra cement complete all as specified and as directed.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate in roof padding, rounded or chamfered on edges complete all as specified and as directed.

M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with double glossy finish, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket for geyser point on independent board with 4.0 sqmm multistranded copper conductor single core PVC insulated unsheathed FR LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.00 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for metal plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FRLS with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

One bell point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 124 above but wiring with 2.5 Sqmm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed

S & F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt complete all as specified and as directed.

S & F Call bell Ding dong, 230 Volt single phase complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S & F recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements including necessary connection and taking down the old one complete all as specified and as directed.

S & F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unsv one complete all as specified and as directed.

S & F in replacement MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 to100 amps complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised iron strip25 x 4 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 3 of SSR Part- I including testing and dismantling of old earthing complete all as specified and as directed.

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and directed.

M&L for painting to ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed.

Taking down carefully Exhaust fan from its original position and refixing it after making in serviceable condition to the same position after B/R plaster work complete all as specified and as directed.

S & F for SPN enclosure with two pin and earth plug and socket with 240 volts 32 Amp SP MCB including removal old unsv one complete all as specified and as directed.

Taking out old unserviceable cable of any size carefully from trenches after disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note: The Excavation and earth work shall be measured and paid separately under relevant item of Schedule.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 4.0 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. Note: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this Schedule 'A'.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Horizontal boring of holes, under road/ pavement / hard standing etc. not exceeding 10 Metres in length, in any type of soil, suitable for passing through up to 50 mm bore, galvanised steel tubing, complete all as specified and directed.

Supplying and fixing Galvanised mild steel pipe /tubing, light grade complete with all fittings of 32 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers as in cable protection complete all as specified and as directed. Note : Excavation & Earth work shall be measured and paid separately.

Taking out old unserviceable GI Pipe of any size from site complete all as specified and as directed. Note : The Excavation and earth work shall be measured and paid separately under relevant item of Schedule.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories complete all as specified and as directed.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories complete all as specified and as directed.

M& L for cutting existing GI pipe alteration or addition of upto 40 to 50 mm dia bore for insertion of reducer Tee complete with complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 3 pin 5/6 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 3 pin 5/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable complete all as specified and as directed.

S&F deluxe fan electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F in repairs MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F ceiling fans with all accessories 230 Volts, 1200mm sweep BEE 5 Star rated, conforming to relevant IS complete with pre wired with 3 core cable complete all as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, FRLS screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 6 Sqmm 2 Core with all fixing & connecting accessories such as aluminum cable lugs, cable gland, nut, bolts, washer etc complete all as specified and as directed. Note: Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this Schedule 'A' part.

M&L for 50mm bore steel tubing light grade for protection of cable including necessary joints complete all as specified and as directed

PRAVESH KUMAR

M/S SINHA ENTERPRISE

M/S MOHAN KUMAR BANSAL

SHRI ARABINDA GHOSH

R K AGARWAL

BIG BEN ENTERPRISES

M/s. RAMPHAL GARG

samrat saw mill and joinery workshop