Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L3 | |
| 3 | Rejected-Technical | - | Rejected-Technical L4 | |
| 4 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | sivanandankk L1 | Prasad VP L4 | SUDHEER V P L2 | ARAVINDAN K K L3 |
|---|---|---|---|---|---|---|---|
| 1.00ANGANWADI IMPROVEMENTS | |||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 408.93 | kg | 184.01 ₹75,247.58 Lowest | 193.7 ₹79,210.13 | 185.7 ₹75,938.67 | 190 ₹77,697.08 |
| 1.00 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 25.18 | sqm | 243.46 ₹6,130.32 Lowest | 253.7 ₹6,388.17 | 245.7 ₹6,186.73 | 250 ₹6,295 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 67.5 | sqm | 805.18 ₹54,349.65 Lowest | 820.58 ₹55,389.15 | 812.58 ₹54,849.15 | 805.18 ₹54,349.65 Lowest |
| 1.00 | 16.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade | 94 | sqm | 1,058.89 ₹99,535.66 Lowest | 1,076.61 ₹1,01,201.34 | 1,068.61 ₹1,00,449.34 | 1,058.89 ₹99,535.66 Lowest |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 16.22 | cum | 7,613.45 ₹1,23,490.16 Lowest | 7,691.3 ₹1,24,752.89 | 7,683.3 ₹1,24,623.13 | 7,613.45 ₹1,23,490.16 Lowest |
| 1.01 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | 150 | kg | 120.17 ₹18,025.5 Lowest | 129.28 ₹19,392 | 121.28 ₹18,192 | 150 ₹22,500 |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.15 | cum | 1,19,750.07 ₹17,603.26 Lowest | 1,20,856.7 ₹17,765.93 | 1,20,848.7 ₹17,764.76 | 1,19,750.07 ₹17,603.26 Lowest |
| 1.01 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1.85 | sqm | 2,991.55 ₹5,534.37 Lowest | 3,027.01 ₹5,599.97 | 3,019.01 ₹5,585.17 | 2,991.55 ₹5,534.37 Lowest |
| 1.01 | 50.9.6.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | 3.24 | sqm | 4,154.45 ₹13,460.42 Lowest | 4,200.57 ₹13,609.85 | 4,192.57 ₹13,583.93 | 4,154.45 ₹13,460.42 Lowest |
Tender Value
₹5.1 L
EMD Value
₹12,692
Closing Date
14 Mar 2025, 6:00 pmClosed
ASSISTANT ENGINEER
MUNICIPAL OFFICE TRIPUNITHURA
Illikkappadi Thottankara anganwadi ward 7-Illikkappadi Thottankara anganwadi ward7
2025_LSGD_745196_46
14627/2016
Open Tender
Civil Works - Buildings
Item Rate
90 days
TRIPUNITHURA
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,240
₹12,692
20 Nov 2025
6 Mar 2025
15 Mar 2025
6 Mar 2025
14 Mar 2025
6 Mar 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1206670.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .