SPL REPAIR OF BLDG NO 16AF STORE HELIPAD AND REPLACEMENT OF WINDOW AND DOOR AT NAINITAL UNDER GE RANIKHET

Amount

BOQ/Sch 'A' B/R portion Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings..

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed

Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above)

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W.Gde-E-250 all as specified and directed.

S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of Debries outside Cantt area complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course complete where required all as specified and as directed .

M&L machine cut kota stone slab flooring 16mm to 18mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete and including 20mm thick screed bed or bedding layer in cement mortar (1:6) all as directed by Engineer-in-Charge.

M&L Kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete and including 10mm thick plaster in CM (1:4) all as directed by Engineer-in-Charge.

Demolition of brick/PCC block/Stone Masonry work built in cement mortar all as specified

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work.

Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

Supply & fixing pvc panelling made up of pvc hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shed and design,fixed to wall for ceilling all as per the manufacturer instruction,fixed in repair ceiling complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete..

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 125 X 60 mm complete as specified.

M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete.

S&F 30mm thick Flush shutters with/without peep hole/vision panel, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match all as specified and directed.

S&F 35mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. Glass or wire cloth, etc. in panels or sash squares shall be measured separately

S&F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm long aluminium handles cast type anodised.

S&F in repair 150 mm floor door stopper of aluminium alloy body and tonuge ,anodised, with hard drawn steel spring fixed in floor.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete.

S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed.

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work

S & F 30mm wide Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised

S&F 100mm Hasp and staple, safety type, Aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete.

M&L for RCC 1:2:4 type B-1, Beams, cantilevers, bressumm ers, lintels over 1.5m span

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed. Note : Rate should be deemed included in the said items in the item rate.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete.

Supply only WPC complete all as specified and directed.

M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete.

M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed,

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F Mild steel sheet eaves gutters thickness of sheet 1.25 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes, supports etc complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer -in-Charge.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Excavating over areas, in hard / dense soil n exc 1.5 m deep and getting out all as specified

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed.

M & L for PCC 1:2:4 type - B0 (using 12.5 mm graded crushed stone aggregate), as in coping, kneelers, perapets, apex stones and similar works incl necessary formwork complete all as specified directed by Engr-in Charge.

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed by Engr-in- Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) as in surface channels and drains including form work.

Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and as directed

Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, laid in alternate panel all as specified and dierected.

M&L finishind surface of conrete roads, pavements, by brooming complete all as specired and directed.

M&L for Forming 12mm thick expansion joints in 100 mm thick slab , filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' all as specified and directed.

Painting Adequate No. of coats of lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white, all as specified and directed.

M & L for walling of random rubble stone masonry uncoursed well bounded badded and solidly hearted built in CM 1:6 brought upto course complete all as specified and directed by Engineer-in-Charge.

Ditto all as per item no 67 above but except stone.

Extra over stone walling for hammer dressing to face stone and dressing face beds and joints as specified of random rubble walling uncoursed or brought upto courses surface n exc 40 mm of Granite or Trap stone.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete.

M & L for PCC 1:2:4 type - B1 (using 20 mm graded crushed stone aggregate), as in plinth course, Parapets and railing up to 60 cm hight, coping, kneelers, apex stones and similar works incl necessary formwork complete all as specified directed by Engr-in Charge.

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin VC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F in repair Aluminium (Extruded section body) Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones.

S/FSheet glass 3mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5Sqm in each pane complete.

Preparing new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge

BOQ/Sch 'A' E/M portion Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface.

Supply & Fixing point wiring for one light point/ fan / Exhaust fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 83 herein before but one socket outlet 5 Amps on the same board.

All as per item No. 83 herein before but one 3 pin socket outlet 5 Amps independent.

All as per item No. 83 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 15 Amps socket.

S&F switch piono,flash type 5 Amp one way

S&F Socket outlet 3 pin, 5A, flush type

S&F switch piono,flash type 15 Amp one way

S&F Socket outlet 15Amp flush type

S&F ceiling rose surface bakelite 3 terminal with base plate.

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. Make Havells cat pat LUMILINEBS20WLED865SPCWH or equivalent of phillips/wippro/Bajaj/Surya complete Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.

S&F lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting with and including one No 10 watt LED lamp all as specified and directed.

Supply & Fixing sheet metal enclosure for SPN DBs (double door type) Single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium Stranded conductor served with aninner sheathing of PVC tape armoured with galvanised steel wire or tape and overallPVC sheathed 6 sq. mm 2 core nominal cross section inservice connections

Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge

Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick sub class 'B' for protection of cable comlete all as specified and directed.

Ramsons (BID ID -3506398)

Builders Harpal (BID ID -3507186)

SS Construction Co (BID ID -3512288)

M/S S R Construction (BID ID -3511565)