CONSTRUCTION OF JADTI ROOM (G+1) AT CENTRAL JAIL SABARMATI , AHMEDABAD INCL UDING ELECTRIFICATION WORK.(Nineth attempt)(SBD)

NAME OF WORK:- CONSTRUCTION OF JADTI ROOM (G+1) AT CENTRAL JAIL SABARMATI , AHMEDABAD INCLUDING

ELECTRIFICATION WORK.

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

M Description QUANTITY Unit RATE IN WORD Amount

1 Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out 70.00 CMT 115.92 Rs. One Hundred Fifteen &

and stacking of useful materials and disposing of the excavated stuff upto any Lead Paise Ninety Two Only

2 Providing and laying cement concrete 1:3:6 ( 1 cement ; 3 coarse sand; 6 crushed 4.00 CMT 2976.00 Rs. Two Thousand Nine

stone aggregates 40mm nominal size) and curing complete excluding cost of form Hundred Seventy Six Only

work in Foundation and plinth.

3 Providing and laying cement concrete 1:2:4 ( 1 cement ; 2 coarse sand; 4 crushed 1.00 CMT 3661.30 Rs. Three Thousand Six

stone aggregates 20mm nominal size) and curing complete excluding cost of form Hundred Sixty One & Paise

work in Foundation and plinth. Thirty Only

4 Providing and Laying controlled cement concrete M-250 including finishing smooth with 10.00 CMT 4595.51 Rs. Four Thousand Five

curing complete including the cost of form work of plywood only with fair finish & Hundred Ninety Five & Paise

proping must be of steel only so as to give a fair finishbut excluding the cost of Fifty One Only

reinforcement ,concrete work in foundation FOOTING and mass concrete.Rate are

also inclusive of Providing and mixing Plasticizer of approved make in proportion

prescribedas per mix design..

5 Providing & laying controlled cement Concrete M-250 & including finishing smooth 3.00 CMT 9014.12 Rs. Nine Thousand Fourteen

with curing complete including the cost of form workof plywood only with fair finish & & Paise Twelve Only

proping must be of steel only so as to give a fair finish but excluding cost of

reinforcement for R.C.C work in COLUMN UP TO PLINTH for any cross sectional area

of column.Rate are also inclusive of Providing and mixing Plasticizer of approved make

in proportion prescribed as per mix design.

6 Providing and laying Controlled cement concrete M-250 and finishing smooth with 9.00 CMT 7052.93 Rs. Seven Thousand Fifty

curing etc.. complete including the cost of formwork of plywood only with fair finish & Two & Paise Ninety Three

proping must be of steel only so as to give a fair finish but exculding the cost of Only

reinforcement for PLINTH BEAMS.Rates are Inclusive of Providing and Mixing

Plasticiser of Approved Make & In Proportion As Per Mix Design.

7 BRICK WORK using common burnt clay building bricks having crushing strength not 11.00 CMT 3981.21 Rs. Three Thousand Nine

less than 35 kg/cm2 in FOUNDATION & PLINTH in cement mortar 1:6 ( 1 cement : 6 Hundred Eighty One & Paise

coarse sand ) ( conventional bricks ) Twenty One Only

M Description QUANTITY Unit RATE IN WORD Amount

8 Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of 33.00 CMT 129.10 Rs. One Hundred Twenty

foundations etc. in layers not exceeding 20 cms. In depth consolidation each deposited Nine & Paise Ten Only

layer by ramming and watering.

9 Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 20Cms Th. 26.00 CMT 286.20 Rs. Two Hundred Eighty Six

Inclu.. Watering , Ramming & Consolidating Etc.. Complete & Paise Twenty Only

10 FILLING in plinth with SAND under floors including watering, raming consolidating and 13.00 CMT 455.63 Rs. Four Hundred Fifty Five

dressing etc. complete. & Paise Sixty Three Only

11 Applying general insecticides pest control treatment to floors,cupboards etc including 87.00 SMT 88.40 Rs. Eighty Eight & Paise

lanour materials etc. complete. Using Imidacloprid 30.5 SC as per IS 6313 part-II Forty Only

(0.075% concentraction by mass) is recommended 10.5 ml chemical diluted with

Liters of water application 0.5 litre chemical/ Sqm of surface is recommended as per

12 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 crushed 7.00 CMT 2653.67 Rs. Two Thousand Six

stone aggregates 40mm nominal size) and curing complete excluding cost of form Hundred Fifty Three & Paise

work in Foundation and plinth. Sixty Seven Only

13 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 coarse sand; 10 crushed 9.00 CMT 2492.51 Rs. Two Thousand Four

stone aggregates 20 mm nominal size) and curing complete excluding cost of form Hundred Ninety Two & Paise

work in Foundation and plinth. Fifty One Only

14 Providing & laying control cement concrete M 200 including finishing smooth with 3.00 CMT 5911.20 Rs. Five Thousand Nine

curing complete including cost of formwork of plywood only with fair finish & proping Hundred Eleven & Paise

must be of steel only so as to give a fair finishbut excluding the cost of reinforcement in Twenty Only

COPING Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make &

In Proportion As Per Mix Desig

15 Providing and laying controlled cement concrete M-150 including finishiong smooth 10.50 CMT 3923.27 Rs. Three Thousand Nine

with curing complete excluding cost of formwork but excluding cost of FOOTING base Hundred Twenty Three &

of columns and Mass concrete. Rates are Inclusive of Providing and Mixing Plasticiser Paise Twenty Seven Only

of Approved Make & In Proportion As Per Mix Design

16 Provinding and laying Controlled cement concrete M-200 and finishing smooth with 6.00 CMT 10364.93 Rs. Ten Thousand Three

curing etc. complete including the cost form work of plywood only with fair finish & Hundred Sixty Four & Paise

proping must be of steel only so as to give a fair finishbut excluding the cost of Ninety Three Only

reinforcement for RCC work in COLUMN FOR Ground floor .Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

M Description QUANTITY Unit RATE IN WORD Amount

17 Provinding and laying Controlled cement concrete M-200 and finishing smooth with 5.00 CMT 10404.78 Rs. Ten Thousand Four

curing etc. complete including the cost form work of plywood only with fair finish & Hundred Four & Paise

proping must be of steel only so as to give a fair finishbut excluding the cost of Seventy Eight Only

reinforcement for RCC work in COLUMN FOR First floor .Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design.

18 Providing & laying controlled cement concrete M 200 for RCC LINTEL including 1.50 CMT 8445.30 Rs. Eight Thousand Four

finishing smooth with curing etc complete including the cost of formwork of plywood Hundred Forty Five & Paise

only with fair finish & proping must be of steel only so as to give a fair finishbut Thirty Only

excluding the cost of reinforcement for GROUND FLOOR. Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

19 Providing & laying controlled cement concrete M 200 for RCC LINTEL including 1.20 CMT 8485.15 Rs. Eight Thousand Four

finishing smooth with curing etc complete including the cost of formwork of plywood Hundred Eighty Five & Paise

only with fair finish & proping must be of steel only so as to give a fair finishbut Fifteen Only

excluding the cost of reinforcement for FIRST FLOOR. Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

20 Providing & laying controlled cement concrete M 200 for RCC LINTEL BEND 0.50 CMT 5911.20 Rs. Five Thousand Nine

including finishing smooth with curing etc complete including the cost of formwork of Hundred Eleven & Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish Twenty Only

but excluding the cost of reinforcement for GROUND FLOOR. Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

21 Providing and laying controlled cement concrete M-200 for reinforcement concrete 2.00 CMT 9396.81 Rs. Nine Thousand Three

CHAJJAS.not exceeding 10cm thickness up to floor two level including finishing the Hundred Ninety Six & Paise

exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth Eighty One Only

surface. including formworkof plywood only with fair finish & proping must be of steel

only so as to give a fair finish & curing etc. complete excluding cost of reinforcement

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design

22 Providing and laying controlled cement concrete M 200 & finishing smooth with curing 13.00 CMT 8018.24 Rs. Eight Thousand Eighteen

etc. completed including the cost of formwork of plywood only with fair finish & proping & Paise Twenty Four Only

must be of steel only so as to give a fair finish but excluding the cost of reinforcement

for R.C.C. work in SLAB having thickness of 10 cm & up to 13 cms. for GROUND

FLOOR Rates Are Inclusive Of Providing & Mixing Plasticizer Of Approved Make & In

Proportion As Per Mix Design

M Description QUANTITY Unit RATE IN WORD Amount

23 Providing and laying controlled cement concrete M 200 & finishing smooth with curing 13.00 CMT 8058.09 Rs. Eight Thousand Fifty

etc. completed including the cost of formwork of plywood only with fair finish & proping Eight & Paise Nine Only

must be of steel only so as to give a fair finish but excluding the cost of reinforcement

for R.C.C. work in SLAB having thickness of 10 cm & up to 13 cms. for FIRST FLOOR

Rates Are Inclusive Of Providing & Mixing Plasticizer Of Approved Make & In

Proportion As Per Mix Design

24 Providing and laying Controlled cement concrete M-200 and finishing smooth with 8.00 CMT 8720.02 Rs. Eight Thousand Seven

curing etc.. complete including the cost of formwork of plywood only with fair finish & Hundred Twenty & Paise

proping must be of steel only so as to give a fair finish but exculding the cost of Two Only

reinforcement for BEAMS having any cross sectional area for GROUND

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design

25 Providing and laying Controlled cement concrete M-200 and finishing smooth with 8.00 CMT 8759.87 Rs. Eight Thousand Seven

curing etc.. complete including the cost of formwork of plywood only with fair finish & Hundred Fifty Nine & Paise

proping must be of steel only so as to give a fair finish but exculding the cost of Eighty Seven Only

reinforcement for BEAMS having any cross sectional area for FIRST FLOOR.Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As

26 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding 6857.51 KG 75.46 Rs. Seventy Five & Paise

and placing in position complete upto floor two level Forty Six Only

27 BRICK work masonary in common brunt clay building bricks having crusing strength 28.00 CMT 4253.46 Rs. Four Thousand Two

NOt less than 35 kg./sq.cm.in cement mortar 1:6 (1 cement : 6 coarse sand ) Hundred Fifty Three & Paise

(conventional bricks for GROUND FLOOR) Forty Six Only

28 BRICK work masonary in common brunt clay building bricks having crusing strength 39.00 CMT 4293.25 Rs. Four Thousand Two

NOt less than 35 kg./sq.cm.in cement mortar 1:6 (1 cement : 6 coarse sand ) Hundred Ninety Three &

(conventional bricks for First FLOOR) Paise Twenty Five Only

29 HALF BRICK masonary in common brunt clay building bricks having crusing strength 47.00 SMT 646.70 Rs. Six Hundred Forty Six &

NOt less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) Paise Seventy Only

(conventional bricks for GROUND FLOOR)

30 Providing 10mm thick cement plaster in single coat on ceilings for interior plastering 99.00 SMT 199.88 Rs. One Hundred Ninety Nine

and finished even and smooth in C.M.1:3(1-cement;3-sand) including finishing with a & Paise Eighty Eight Only

floating coat of neat cement slurry at Ground Floor

31 Providing 10mm thick cement plaster in single coat on ceilings for interior plastering 96.00 SMT 225.69 Rs. Two Hundred Twenty

and finished even and smooth in C.M.1:3(1-cement;3-sand) including finishing with a Five & Paise Sixty Nine Only

floating coat of neat cement slurry at First Floor

32 Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior 227.00 SMT 203.34 Rs. Two Hundred Three &

plastering and finished even and smooth in cement mortar 1:4(1-cement;4-sand) Paise Thirty Four Only

including finishing with a floating coat of neat cement slurry at Ground Floor.

M Description QUANTITY Unit RATE IN WORD Amount

33 Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior 239.00 SMT 231.20 Rs. Two Hundred Thirty One

plastering and finished even and smooth in cement mortar 1:4(1-cement;4-sand) & Paise Twenty Only

including finishing with a floating coat of neat cement slurry at First Floor.

34 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level 325.00 SMT 297.68 Rs. Two Hundred Ninety

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick Seven & Paise Sixty Eight

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Only

35 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface 195.00 SMT 186.73 Rs. One Hundred Eighty Six

(two coats) to give an required shap even shade after throughly brushing the surface & Paise Seventy Three Only

to remove all dirt and remains of loose poweder material etc. complete. Rate are

inclusive of applying two coat of lapy (Putty) and one coat of primer on new

Ceilling/Slop Surface to give and even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth. Putty,

Primer & Paint should be as per Approved list of GSPHCL.

36 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an 417.00 SMT 176.33 Rs. One Hundred Seventy

required shap even shade after throughly brushing the surface to remove all dirt and Six & Paise Thirty Three Only

remains of loose poweder material etc. complete. Rate are inclusive of applying two

coat of lapy (Putty) and one coat of primer on new wall surface to give and even shade

including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth. Putty, Primer & Paint should be as per Approved list

37 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) 381.00 SMT 147.68 Rs. One Hundred Forty

over and above applying One Coat Of Primer to give an required shape even shade Seven & Paise Sixty Eight

after thoroughly brushing the surface to remove all dirt, and remains of loose powdered Only

materials.etc complete. Primer & Paint should be as per Approved list of GSPHCL.

38 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base 177.00 SMT 982.83 Rs. Nine Hundred Eighty

of cement mortar1:6(1-cement:6-coarses and)orL.M.1.1.5 (1-Lime putty :1.5- coarse Two & Paise Eighty Three

sand) laid over and jointed with grey cement slurry mixed with pigment to match the Only

shade of slab including rubbingand polishing etc. complete. (A) 25mm thick for All

39 Providing and Laying polished kota stone slab 25mm thick in risers of steps,skirting 11.00 SMT 1176.03 Rs. One Thousand One

Dedo and pillars laid on10mm thick cement mortar1:3 (1-Cement : 3 coarse sand) and Hundred Seventy Six & Paise

jointed with gray cement slury mixed with pigment to match the shade of slab including Three Only

rubbing and polishing etc. complete. For All Floor.

40 Providing and Laying 25 mm thick Mirror Polished (Dimond Cut) Kota Stone 18.00 SMT 1081.90 Rs. One Thousand Eighty

Flooring over 20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) One & Paise Ninety Only

laid over and jointed with grey cement slurry including Rubbing and Polishing etc.

Complete. as Directed By Engineer In Charge For All Floors.

M Description QUANTITY Unit RATE IN WORD Amount

41 Providing and Laying 25 mm thick Mirror Polished (Dimond Cut) Kota Stone in 1.00 SMT 1275.10 Rs. One Thousand Two

risers of steps, Skairting, Dedo and pillars laid on 10 mm thick cement motor 1 : 3 (1- Hundred Seventy Five &

Cement : 3-Coarse Sand) and Jointed with gray cement slury mixed with pigment to Paise Ten Only

match the shade of slab including Rubbing and Polishing etc. Complete. as Directed

By Engineer In Charge For All Floors.

42 Providing and Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring 66.00 SMT 1440.20 Rs. One Thousand Four

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Hundred Forty & Paise

surface orfixing on existing flooring by adhesive including dismentaling of existing Twenty Only

flooring and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete.

43 Providing and Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for 5.00 SMT 1392.20 Rs. One Thousand Three

skirting,risers of steps and dedo over 20 mm (average) base of cement mortar 1:3 ( 1 Hundred Ninety Two & Paise

cement: 3 coarse sand) on new surface orfixing on existing flooring by adhesive Twenty Only

including dismentaling of existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete.

44 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and 21.00 SMT 2428.00 Rs. Two Thousand Four

sills of doors & windows using neat cement slurry laid over 20 mm average base of Hundred Twenty Eight Only

cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry

including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and

tackles,scaffolding etc. complete(with base of neat cement) as per direction of

Engineer in charge including rounding the exposed edges as directed.

45 Providing and Fixing of stainless steel 304 grade pipe railing.0.9 mtr. Height top pipe 8.00 RMT 911.03 Rs. Nine Hundred Eleven &

of 2" dia , vertical balustrade 1.0 " x1.0" at every max. 0.9 mt c/c, fixed with Paise Three Only

stone/concrete or brickwork, Balustrade as directed by engineer in charge. Rate are

inclusive of all material,labour,taxes &polishing.

46 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 4.00 SMT 12870.01 Rs. Twelve Thousand Eight

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is Hundred Seventy & Paise

with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm One Only

Face Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of

Non Teak Solid Wood of size 150mm x 70mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi and

harmful insects also warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press method. Shutter

shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any

M Description QUANTITY Unit RATE IN WORD Amount

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast

(25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing 6mm thick Glass on Top of Door Frame

with Battens Patti, following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double

Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick.

Door with Glass are Fixing as per Details Drawing & Instruction of Engineer in charge.

All Materials Used Shall be as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog Maked Only.

47 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 8.00 SMT 8399.74 Rs. Eight Thousand Three

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is Hundred Ninety Nine & Paise

with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Seventy Four Only

Face Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of

Non Teak Solid Wood of size 100mm x 60mm with Chemically Treated and Seasoned

Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi and

harmful insects also warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press method. Shutter

shall be brought to site in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is free from nail mark & any

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast

(25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing & Instruction of Engineer in

charge. All Materials Used Shall be as Per approved Material Make List of G.S.P.H.C.

The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

M Description QUANTITY Unit RATE IN WORD Amount

48 Providing and fixing window having extruded aluminum Colour anodized section frame 24.00 SMT 1568.27 Rs. One Thousand Five

main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track Hundred Sixty Eight & Paise

member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size Twenty Seven Only

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame

as per details etc

49 Providing & Laying integrated cement based proprietary water proofing treatment of 92.00 SMT 855.11 Rs. Eight Hundred Fifty Five

required thickness over the roof including 10mm thick cement mortar 1:3 and CHINA & Paise Eleven Only

MOSAIC fitting and finally finishing the surface with white cement slurry and sloping out

terrace slabs with Following specification laid to required slope not flatter than 1:80 (

the thickness of water proofing treatment near rainwater outlet or the lowest point of

the finished slope shell not to be less than 45 mm. Including treating the vertical

surface of the parapet wall up to 20 cm. height above finished level of terracing

including finishing top with joint less water proofing plaster curing testing etc,

completed. Rate is Including 10 years performance of guarantee bond to be given on

stamp paper ( no extra shall be paid for increase in thickness for proper slope ).

(A) Applying & grounting a slurry coat of neat cement using 2.75 kg/smt. of cement

admixed with proprietary water proofing compound confirming to IS 2645 and 10mm.

Thick water proofing cement plaster in cement mortar in 1:3.over the RCC slab

including cleaning the surface before treatments.(B) Laying cement concrete using

broken brick bat using 25 mm to 40 mm size with 50% of cement mortar 1:4 (

cement : 4 corse sand )over 10mm. thick water proofing cement plaster in cement

mortar in 1:3 admixed with proprietary water proofing compound conforming to IS

required slope and treating similarly the adjoining walls up to 200 mm height including

rounding of junction of walls.(C) After two days of proper curing applying a second coat

of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less

cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing

compound confirming to IS 2645 and finally finishing the surface with trowel with neat

cement slurry .(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test. All above operation to be done in

order and as directed and specified by the engineer in charge.

M Description QUANTITY Unit RATE IN WORD Amount

50 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 29.00 RMT 302.54 Rs. Three Hundred Two &

90mm Dia Complete with Special flings, Compressor type Fittings, Wall clips on Paise Fifty Four Only

including making good the ceiling and floor on terrace rain water pipe shall be 90 mm

Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

51 Providing & Fixing chicken wire mesh of 20 guage with necessary screws and nails at 96.00 SMT 64.06 Rs. Sixty Four & Paise Six

joints or crackes of brick work or RCC work, Only

52 Providing a I.S.I. mark 7 lavers three keys brass pad lock of NAVTRAL (godrej) make 7.00 No 211.86 Rs. Two Hundred Eleven &

65mm dia on completion of porject. Paise Eighty Six Only

53 6.00 No 1500.00 Rs. One Thousand Five

Painting Numbers or name on Acrylic plate as Directed by Engineer in Charge.

54 Moulding of kota stone/Granite stair trade complete as per direction of engg.in.charge 49.00 RMT 129.95 Rs. One Hundred Twenty

Nine & Paise Ninety Five

55 Providing 3 Nos groove in total length of staircase Tread of size 3mm*3mm finished 66.00 RMT 82.80 Rs. Eighty Two & Paise

Smooth in Parallel line, equally spaced as per directed eingineer in charge in all types Eighty Only

at flooring etc. complete.

56 Providing, Fabrication and fixing M.S. Grill / GATE of approved pattern fabricated from 520.00 KG 74.92 Rs. Seventy Four & Paise

M.S. flat, Square Bars, round bars, C channel, square/round box pipe as per detail Ninety Two Only

drawings. Rate is inclusive of welding with grinding and applying of mild steel putty with

hardener into groove to have smooth surface, two coats of oil paint and one coat of

yellow zinc chromate primer coat of approved brand only. Oil paint shall be luxol

Enamel paint of Berger Paint India Limited or Asian paint Apcolite premium gloss

Enamel of Asian Paint or Dulux premium gloss Enamel of Dulux Paint and Nerolac

Sythetics Enamel of Nerolac paint for all floor and at any height only. (M.S. Grill / GATE

material should be ISI mark Only)

57 Demolition of Brick work and stone masonry including stacking of serviceable 35.00 CMT 544.95 Rs. Five Hundred Forty Four

materilas and disposal of nserviceablematerialswithall leadand lift.(ii) In Cement & Paise Ninety Five Only

58 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 100.00 SMT 47.25 Rs. Forty Seven & Paise

materilas and disposal of unserviceable materials with all lead and lift Twenty Five Only

59 Dismentaling of sheet roofing including ridges,Hips, Valleys, Gutters etc. stackingof 120.00 SMT 47.25 Rs. Forty Seven & Paise

serviceable materilas anddisposal of unserviceablematerials with all lead and lift.(i) Twenty Five Only

G.I.sheet roofing.

60 Dismentling steel work including distempering and stacking the materials with all lead 850.00 KG 3.63 Rs. Three & Paise Sixty

and lift. Three Only

61 CREDIT VALUE .(i) G.I.sheet roofing. 120.00 SMT -200.00 Minus Two Hundread only -24000.00

62 CREDIT VALUE OF steelwork 850.00 KG -25.00 minus Twenty five only. -21250.00

M Description QUANTITY Unit RATE IN WORD Amount

63 Providing Supplying and Fixing S4 Channel system (S4 channel+ Profile Bracket+ U 30.00 EACH 421.58 Rs. Four Hundred Twenty

Bolt runner mounted system) for multiple Pipes for External Vertical Fixed line with wall One & Paise Fifty Eight Only

distance 3" including nuts, bolts, fastners etc complete as per detailed Specification

and as directed of Engineer in Charge.

64 Providing Supplying and Fixing Single pipe Bracket System with U Bolt rubber 30.00 EACH 182.83 Rs. One Hundred Eighty Two

mounted for Pipe Supporting Clamping System for External Vertical Fixed line with & Paise Eighty Three Only

wall distance 3" including nuts, bolts, fastners etc complete as per detailed

Specification and as directed of Engineer in Charge.

65 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 37.00 SMT 680.10 Rs. Six Hundred Eighty &

60mm thick with grade of concrete M300 pnumatic compressed / vibrated Paise Ten Only

mechanically and as per approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63- 2018 etc. Complete.

66 Providing and fixing Precast Concrete Kerb Stone of Grey Cement Based Concrete 41.00 SMT 358.06 Rs. Three Hundred Fifty

Block size of 30 cm Length, 30 cm Height and 15 cm thick of M-250 Grade Concrete Eight & Paise Six Only

as per approved design in required colour (Red, White, and Yellow) and Including

Excavation For Fixing In proper Line And Level, Filling The Joint C:M 1:3 (1 Cement :

Fine Sand) etc. Complete.

ELECTRICAL WORK

67a Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm 43.00 Point 481.00 RS: Four Hundred

copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS Eighty One only

wire for earth continuity in FIA approved ISI mark medium class white colour 20/25 mm

dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected

on/in Brick Wall / slab along with continuous G.I. fish wire to draw wires and laid in

approved manner zari for PVC pipe and boxes shall be filled with cement mortar and

finishing the surface to match the wall / ceiling complete with approved make 5/6 Amp.

ISI make modular type switch and accessories mounted in 20 G. G.I. company

fabricated metallic box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD

Connector (make & model approved by EIC and matching colur with switches

accessories) (Deep Junction box 75mm depth if required) as directed for concealed

wiring. Light point. Cat.-III.

M Description QUANTITY Unit RATE IN WORD Amount

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent

mortar going into the box. Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised before execution by

agency otherwise payment will not be done for extra long point. (For future extention, if

required, agency has to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per tender item) [This item

include cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box,

MCBDB & box cutting plaster finishing for modular plate without any gap] [conductor

resistance should be as per IS:8130/1984]

67b For Secondary Light Point, Cat.-III 2.00 Point 166.00 RS: One Hundred Sixty

67c For Fan Point.(with 6A Modular type switch and Two Module hum free 5/6 step EME 17.00 Point 668.00 RS: Six Hundred Sixty

step type Electronic fan regulator both having ISI Make ) Cat-III Eight only

67d For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat. 5.00 Point 505.00 RS: Five Hundred Five

67e For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI 28.00 Point 255.00 RS: Two Hundred Fifty

mark) Cat. III Five only

68a Providing and erecting Medium Class FIA approved and ISI mark white colour 99.00 Mtr. 24.00 RS: Twenty Four

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC only

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling

along with continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia. (a) 20 mm. dia.

68b For 25 mm. dia. 47.00 Mtr. 33.00 RS: Thirty Three

69a Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade 245.00 Mtr. 62.00 RS: Sixty Two only

with FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab

along with continuous G. I. fish wire to draw mains laid in approved manner with

plastering by cement mortar & finishing the surface to match the wall / ceiling complete

with FRLS PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper

multi stranded conductor for earthing as per standard colour code. [conductor

resistance should be as per IS:8130/1984]

69b 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS 65.00 Mtr. 82.00 RS: Eighty Two

copper multi stranded conductor for earthing as per standard colour code. (Conductor only

resistance should be as per IS:8130/1984)

M Description QUANTITY Unit RATE IN WORD Amount

69c For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 45.00 Mtr. 146.00 RS: One Hundred Forty

FRLS copper multi stranded conductor for earthing as per standard colour code. (with Six only

25 mm dia. PVC pipe) (for MCBDB mains) (Conductor resistance should be as per

70 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with 15.00 Mtr. 30.95 RS: Thirty and Paise

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninty Five only

71 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with 17.00 Mtr. 37.14 RS: Thirty Seven and

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Paise Fourteen only

72 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 10.00 Point 738.00 RS: Seven Hundred

2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC Thirty Eight only

insulated FRLS wire for earth continuity in FIA approved ISI mark white colour

medium class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected in wall/slab along with continuous G. I. fish wire to draw

wires and laid in approved manner zari for PVC pipe & boxes shall be filled with

cement mortar & finishing the surface to match the wall / ceiling complete with 16 Amp

Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic

box covered with appropriate front plate modules erected flushed with wall. (a)

Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin

top duly both having ISI mark. (Necessary sheet / tape / polythene / sand must be

erected or filled in all box To Prevent Mortor Going In To The Box) Cat.-III. (Conductor

resistance should be as per IS:8130/1984)

M Description QUANTITY Unit RATE IN WORD Amount

73a Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 1.00 Each 7025.00 RS: Seven Thousand

mm dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing Twenty Five only

electric rod must be made from Corrosion free Hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner

pipe for that pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for

long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

400 mm depth and Cover should be heavy duty cast iron with required size of 300 mm

X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has

to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

73b For above earthing additional charges for boring in hard rock soil (by breaker) & filling 1.00 Each 276.00 RS: Two Hundred

soft soil in earth pit (certificate for soil have to given by DEE / AE along with Seventy Six only

M Description QUANTITY Unit RATE IN WORD Amount

74a Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 49.00 Mtr. 56.00 RS: Fifty Six only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required. [f] One wire 6.00 sq. mm

74b For One wire 10.00 sq. mm 50.00 Mtr. 91.00 RS: Ninty One only

74c For One wire 16.00 sq. mm 10.00 Mtr. 141.00 RS: One Hundred Forty

75 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be 500.00 Sq. Inch 5.94 RS: Five and Paise

concealed in wall with necessary plastering & finishing with 3 mm thick laminated sheet Ninty Four only

with grooving as directed of following depth 3" depth.

76a Providing and erecting following type of Modular Type Accessories mounted with 20 G 5.00 Each 159.00 RS: One Hundred Fifty

G.I. company fabricated metalic box, single mounting base frame covered with Nine only

textured / metallic front plate, modules erected with necessary connection. As desired

by Engineer in charge.Two pin / RJ-11 Telephone Socket (For One Gang) Cat-III

76b For Blank Plate Single. Cat.-III 50.00 Each 25.00 RS: Twenty Five

76c For Computer RJ-45 socket cat-III 5.00 Each 159.00 RS: One Hundred Fifty

77 Providing & erecting Switch board for Computer or electric apparatus consisting of 5.00 Each 1122.00 RS: One Thousand One

following items in single board erected on Metal board with 3 mm thick PC Hundred Twenty Two

(Polycarbonet) / Acrylic sheet erected as directed. 2 no. 6/16 Amp. universal Socket, 2 only

nos. 16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-III.

M Description QUANTITY Unit RATE IN WORD Amount

78 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 2.00 Each 5868.80 RS: Five Thousand Eight

relevant indian standards ammended upto date. Hundred Sixty Eight and

Supplying and fixing following way single phase MCB distrubution board of company Paise Eighty only

fabricated with sheet box with powder coated inside and outside after apply seven tank

chemical process of MCBDB Door, Back side & Body must be made of 1.2 mm thick

CRCA sheet cover complete with suitable integral single piece construction tinned

copper busbar and link with all necessary interconnection and with necessary size MS

frame for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with isolation

& Protecting Cover for 240 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB:

Including 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA), MCB 40 Amp. double pole

switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:-

Nos., 16 Amp:- 4 Nos. & 25 Amp: 4 Nos.) Cat.-III

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must

be erected in line & level with spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

79 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 7.00 Each 111.00 RS: One Hundred

voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

M Description QUANTITY Unit RATE IN WORD Amount

80 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of 36.00 Each 370.00 RS: Three Hundred

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink Seventy only

shall be made from Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following specification: (A) Company

mark/name on the fitting.(B) Rated input voltage and frequency: 220V to 240 VAC ;

50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min.

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min.

50000 Hrs @ L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M)

Surge protection : Min. 2KV

(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity

Protection must be provided(Q) Fixing clamp design & strength should be sufficient to

hold the fitting erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be given

strictly subject to item specification]

81 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 17.00 Each 1929.00 RS: One Thousand Nine

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 Hundred Twenty Nine

mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power only

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball bearing:

Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade: Aluminium

approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two

Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984,

Aluminium body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per

site requirment, (15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as

per site requirment, (17) No vibration and noise due to mechanical parts. (Agency has

to erect safey wire with ceiling fan and checked with EIC) (OEM has to approved model

as per tender specification and tested at ERDA) (Necessary test reports should be

submitted strictly at the time of approval. Sample approved by EIC subject to above

specification only)

82 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars 17.00 Each 125.00 RS: One Hundred

up to 50 mm Length each side & piereced through 18 Gauge G.I Box having 125 mm Twenty Five only

dia depth of 75 mm complete erected concealed in ceiling with necessary modular

M Description QUANTITY Unit RATE IN WORD Amount

83 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper 65.00 Mtr. 361.00 RS: Three Hundred Sixty

conductor for 1.1 KV. to be laid on wall to be laid 90 cms underground with 1.00 mm One only

thick G.I heavy duty grade or in existing trench / pipe at road crossing or floor of

following size of cables.(A) 4 core 4 Sq. mm

84 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 62.00 Mtr. 117.00 RS: One Hundred

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent Seventeen only

and ultra violet material properties with necessary connecting accessories of same

material at required depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to make ground as

per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

85 Providing & fixing Double compressed heavy duty flange type brass cable gland 5.00 Each 43.00 RS: Forty Three

with rubber ring for P V C insulated armoured cable complete with outgoing tails, only

insulating tape etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma,

MCI, Comet, HMI Make Only)

86 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for 10.00 Each 8.00 RS: Eight only

cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. [a]

87 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 1.00 Each 662.00 RS: Six Hundred Sixty

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Two only

capacity [c] 40 Amp.

88 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet 1.00 Each 442.00 RS: Four Hundred Forty

steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing Two only

terminals for following type of RCCB, RCCB + MCB [a] For 4 pole

89 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per 10.00 Kg. 74.92 RS: Seventy Four and

structure design Including proper size approved by EIC of M.S. angles, flats, bars, Paise Ninty Two only

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality

oil paint and true care red oxide metal primer,asian paint make with erection on site as

per direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

M Description QUANTITY Unit RATE IN WORD Amount

90 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 2.00 Each 1991.00 RS: One Thousand Nine

6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Hundred Ninty One only

Stored Pressure Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ±

10mm, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range

Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically

started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end Aluminum

clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure

Polyester Powder coating (UV Resistant),Brass forged CE Marked valves with

NRV & Auto Safety Release with safety Pin is of SS material, Made up from 1.6mm

thick sheet, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance

Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate & and

guarantee must be attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling

period must be of 3 Years. Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg

Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,

SAFEX,CEASEFIRE)

M Description QUANTITY Unit RATE IN WORD Amount

91 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, 2.00 Each 6526.00 RS: Six Thousand Five

filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Hundred Twenty Six only

Wire Braided Hose & Electrical non-conductor Polyethylene Flat Horn with

Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average

Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating

55B, Internal coating is not applicable & External coating is of enamel spray painting,

Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder

construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS

7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED,

Minimum Wall Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018

and ISI marked. Referance Weight:-Gross Weight 16.4, empty weight 11.9 Kg,

Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall

mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following

printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher

4. Refilling period must be of 5 Years. Following Printed marking on equipment must

be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial

no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by

painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,

SAFEX,CEASEFIRE)

TOTAL ELECTRICAL

TOTAL CIVIL+ELECTRICAL:-

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.