Construction Work of RCC Road With Tri-Mix, Beautification and Circle with Statue as per Various location Chart, At Savarkundla, Dist.: Amreli Under Swarnim Jayanti Mukhya Mantri Saheri Vikash Yojana (UDP-88) Year-2023-24 And District Mineral Foundation Grant Year-2025-26.

NAME OF WORK: CONSTRUCTION WORK OF RCC ROAD WITH TRI-MIX, BEAUTIFICATION AND CIRCLE

WITH STATUE AT VARIOUS LOCATION CHART, AT. SAVARKUNDLA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs…...

Total Amount Rs…...

I/We am/are willing to carry out the work @ ________% Above / Below_________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 2,89,07,530=00 Put to Tender Rs. 2,89,07,530=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF RCC ROAD & PAVER BLOCK ROAD

LOCATION : SAVARKUNDLA KABIR TEKRI TO MALDHARI CHOWK TO KANKIYA ARTS AND COMMERCE

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Removing interlocking type cement concrete paver block (Rubber

moulded) of approved shape, design & colour & moved it on

nagapalika suggested place within 5 Km of Lead. Item includes

levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc.complete. 7360.00 23.23 Sqmt

Demolition including stacking of serviceable materil as and disposal of

unser0viceable materials with all lead and lift. (i) R.C.C. work. 506.30 1082.34 Cumt

Box cutting the road surface to proper slope and camber for making a

base for road work including ramming the excavated stuff and

despositing on the road side slope as directed up to all lead and sretta

Crushed stone aggregate for machine cut hard quality (I) 40mm to

63mm size all lead and lift 183.50 669.63 Cumt

Supplying of Stone Dust all lead and lift 14.70 363.60 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling

the interstices to required camber and gradient (excludin`g spreading

of Blindage) (ii) 40mm to 63mm size aggreagates 183.50 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling

to camber and gradient as directed.. 14.70 154.84 Cumt

Rolling and consolidating water bound macadam (except laterite and

Kankar) including watering not exceeding 150mm thickness (Main

layer including binding materials ) including filling in depressions

which occur during the process. (A) With power roller 183.50 15.87 Cumt

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- Machine Cut stone aggregates 40mm nominal size) and

curing complete including cost of formwork in (A) Foundation and

Plinth 337.50 2896.68 Cumt

Providing and cast in-situ ordinary cement concrete (1:1.5:3) for

average 20cm thick wearing coat/c.c. pavement as directed in

approved fixed side formwork of steel channel including vibrating by

screed-needle vibrator and finishing by plate vibrator and finished in

continuous operation including providing of contraction joint at every

4.00mtr. and expansion joint at interval of 40mtr. applying debonding

strips, bitumen primer, bituminous sealant and curing etc. complete.

including cost of admixtures Melamine Base/ Naphthalene Base using

1.5 Kg. per Cement Bage 1389.50 5273.21 Cumt

Providing and fixing pre-cast Rubber Dye /steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed/ vibrarted by mechanically and as per approved design

confirming to IS 15658:2006 including 35mm Sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level

etc complete. 5895.00 961.52 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cmheight and 15cm thick of M-

200 grade concret as per approved design and A59 including

excavation for fixing in proper line and level, filling the joint with C:M

1:3(1 cement : 3 fine sand) etc complete. 1300.00 402.54 Rmt

Providing Supplying and Installation of Name Plate of Size 1x1.30 mt

with supporting M.S Pole.of hight 2 mt. 1.00 7305.02 Nos.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR-2025-26

NAME OF WORK :- PLANATION ,GARDENING WORK & 3D PAINTING WORK

LOCATION : SAVARKUNDLA KABIR TEKRI TO MALDHARI CHOWK TO KANKIYA ARTS AND COMMERCE

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Box cutting the road surface to proper slope and camber for making a

base for road work including ramming the excavated stuff and

despositing on the road side slope as directed up to all lead and sretta 287.00 109.41 Cumt

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete 46.40 4577.32 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

complete 287.00 301.77 Cumt

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete with providing and mixing water

proofing materials in cement mortar in proportion recommended by

the manufacturer. 75.00 250.54 Sqmt

Providing and fixing of M.S. grill of required pattern to wooden frames

of window etc with M.s. flats at required spacing and frame allround,

ssqure or round bars with round headed bolts and nuts or by screwas.

(B) Ornamental Grill 11330.00 160.85 Kg

Preparation of beds for hedging and shrubbery by excavating 60 cm

deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with

sludge or manure in the ratio of 8:1 (8 parts of stacked volume of

earth after reduction by 20% : one part of stacked volume of sludge or

manure after reduction by 8%), flooding with water, filling with earth if

necessary, watering and finally fine dressing, leveling etc. including

stacking and disposal of materials declared unserviceable and surplus

earth by spreading and leveling as directed, within a lead of 50 m, lift

up to 1.5 m complete (cost of sludge, manure or extra earth to be paid

for separately) 2120.00 225.08 Cumt

Supplying and stacking of good earth at site including royalty and

carriage upto 5 k m lead complete (earth measured in stacks will be

reduced by 20% for payment). 1484.00 520.76 Cumt

Supplying and stacking sludge at site including royalty and carriage

upto 5 km lead complete (sludge measured in stacks will be reduced

by 8% for paymen. 636.00 296.94 Cumt

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface

with light roller make the surface smoothen and light waterning with

sprinkler and maintenance for 30 days or more till the grass establish

properly, as per direction of officer-in-charge. 1050.00 216.54 Sqmt

Providing and Displaying Acalypha twisted well developed with fresh &

healthy 30 cm ht. as per direction of the officer-in-charge. 1000.00 40.40 Each

Providing and stacking of Cycus cirsnallis well developed with fresh &

healthy 35 to 40 lush green leaves as per direction of the officer-in-

charge. 50.00 1919.00 Each

Bottle palm ht. 210-240 cm bottom girth 30-35 cm well developed in

big HDPE bag 30.00 555.50 Each

Providing and displaying of Croton Golden specimen having ht. 90 cm

to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy

foliage in 30 cm size of Earthen pot/Plastic pot as per direction of the

officer-in-charge. 1000.00 169.68 Each

Providing and displaying of Cineraria dwarf hybrid 1000.00 707.00 Each

Providing and displaying of Lupine hybrid 1000.00 424.20 Each

Travelers palm well developed with fresh & healthy leaves foliage

to 240 cm ht specimen plant in 200 cm Cement Pot 20.00 4797.50 Each

Tabebuia sp. height 25.-265 cm. in big polybag size 25 cm 20.00 171.70 Each

Jacaranda mimosifolia height 250-265 cm. in big poly bag size 25 cm 20.00 121.20 Each

Provding & Supplying work of Plantation Port of size 0.60 x 0.90x

with 50 mm thick RCC M-20 walls ,80 mm thick Base with outer

surface of Dark telephonic granite including g TMT Bar FE 500/500D

reinforcement consisting of 8mm dia horizontal bars @ 150 mm c/c

and L-shaped 8 mm dia vertical bars @ 150 mm c/c including

cutting,bending and binding wires, placing in position, providing

shuttering and concreting by using cocrete mixer,compaction by

vibration etc complete as per Engineer in charge. 20.00 164.74 Each

Petunia hybrid different colour single well developed in full bloom in

cm Earthen/Plastic Pot. 200.00 42.42 Each

Allyssum white in full bloom well developed fresh & healthy in 20 cm

Earthen Pot/Plastic Pot. 200.00 42.42 Each

Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high,

aboveground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x

3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S.

flat iron rings in two halves, fixing together at site with required six

numbers of 8 mm dia and 30 mm long bolts, including painting two

coats with synthetic enamel paint of approved brand and manufacture

over a coat of primer. One name plate of 1 mm thick M.S. sheet of

size 250x100 mm shall be welded to the tree guard near the middle

height and lettered CPWD / PWD/ any other approved name. The tree

guard shall be suitably fixed to the ground by embedding four legs of

tree guard in pits of suitable dia and to a depth of 25 cm, refilling the

pits with soil and ramming, complete in all respect as per satisfaction

and direction of Officer-in-charge. 60.00 1211.89 Nos

providing supplying and fitting of cast iron Bench made up of MS

Square tubes (50mm X 25mm) in Length of 1500mm size decorative

Stand / Legs, With Complete Colour & Painting As per Given

Specification With necessary things.include All cost of material, taxes,

transportation to site, loading / unloading, etc. complete with all

incidentals. Warranty periods : 3 year (M.R) Bench Type : Integrated

Seat and BackSeating Capacity : Three PersonsWeight Bearing

Capacity in KG :170Minimum Weight of Cast iron Bench In KG :44

Dimensions : Total Height : 800mm from Ground level, Width :

600mm, Seat Height: 487mm from ground levelTotal Area Required :

1830mm X 915mm, thickness of stand/Legs : 36mmCast Iron Support

Finish : Coated With a rust inhibiting paint 25.00 5050.00 Nos

Side Wall Painting or 3D Painting

Removing dry or oil bound distemper by a washing and scraping and

sand papering the wall surface smooth including necessary repairs to

scratches complete. 1540.00 11.53 Sqmt

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping.) 515.00 51.78 Sqmt

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil, grease,

dirt and other foreign matter and scoured with brushes fine steelwood,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 1540.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter. 515.00 92.20 Sqmt

Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface

to be level, uniform and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux

during the service life during the day time. The marking should meet

the performance criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two years.

Supplying and fixing cat eye (Stimsonite) made out from Acrilo

beautile sterine injuction high compressed molding with reflector

made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided

with bituminous adhesive 100g. with each unit for fixing. (High

Intensity grade) 1625.00 375.72 Nos

Painting lines, deashes, arrows, letters etc on roads, Air fields and like

in two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (i) Over 10cm in

width 123.00 129.29 Sqmt

Wall painting (two coats) natural /artificial art or 3D picture on Wall

surface to give an required shape even shade including throughly

brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth to remove all dirt, and remains of

loose powdered materials.etc complete 1540.00 101.00 Sqmt

3d Siporex Block Material realistic artificial Carving art or 3D picture

on surface to give an required shape even shade including throughly

brushing the wall surface free from mortar droppings and other foreign

matter and sand papered smooth to remove all dirt, and remains of

loose powdered materials.etc by appilying Primer Coating of 2 coat as

per selected color theme, Finel Touchup and PU Coating On Final

Surface to achieve full finishing on 3d carving Art complete including

all All Material, Transportation, Labour , & other cost excluding GST

as per direction of the officer-in-charge. The Theme of the Art is on

the Savarkundla Histrical events or any uniq and iconic things or

Places of savarkundla Town 16.00 27270.00 Sqmt

Maintaining Cleanliness of Approach Roads in Cities in which Roads

becomes dirty from Dust, Debris, Garbage, Wastes, uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm

onside of roads – to remove & maintain them by manually on Weekly

basis in case of Having Sectional Area (a) Single Lane with rise kerbs

3.50 m Fector 0.5 (b) 2-Lane with rise kerbs 7.00 m Fector 1.0 (c) 4-

Lane with rise kerbs 14.00 m Fector 1.5 (d) 6-Lane with rise kerbs

21.00 m Fector 2.0 (e) 8-Lane with rise kerbs 28.00 m Fector 2.5 Km./

Providing and fixing Kiosk Board on Road Side Street Pole made out

of 25x25mm hollow MS pipe size 90x60 cms. rectangular as per

design of back side frame alluminium compous panal grade 0.18 with

photoframe sidewall ACP sheets Grade - 0.25 including cost of Direct

LED Moduler with Copper Wire 2 core 2.5Sqmm with front side heavy

quality backlit flex with printing and ms frame (changeable from time

to time) including all labour transportation charges as per engineer in-

charge. etc.comp. 10.00 6938.70 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- DISTRICT MINERAL FOUNDATION GRANT YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF DIVIDER & STREET LIGHT

LOCATION : SAVAR KUNDLA ROAD TO KABIR TEKRI TO MALDHARI CHOWK TO KANAKIYA ARTS AND

COMMERCE COLLEGE

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface as

normal ground. 3500.00 74.74 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

cable (A) 50 mm outer dia 3500.00 62.62 Mtr

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 90 Watt and above assembled on

single MCPCB of make of Ambika Poles Pvt. Ltd - (iv) 90 watts

(Catt-III) 90.00 7575.00 Ea.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

cables (B) 4 core 25 Sq. mm 3500.00 190.89 Mtr

(C) 4 core 35 Sq. mm 900.00 255.53 Mtr

Providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III 5.00 270.68 Nos

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. 5.00 6173.12 No.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with erection

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base beams) The panel

shall be supplied with following approved manufacturers with following

size (B) The standard companies switch gear shall be used and

only manufacturers at CPRI approved factory (i) with 350mm

depth 1.80 10468.65 Sqmt

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound:- Earthing compound should be capable

to retain moisture for long time Necessary test report must be

submitted 2.00 5760.03 Nos

Supplying and erecting approved make Designer pole made from

Aluminium casting + GI Pipe of make of lighttree- LT-912 The pole

should be made as per IS. and shall be coated with hot dip

galvanizing with graphite gray color as per IS 2629/2633/4759,

suitable suspend local wind speed with integral Junction box consist

of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.(h) 8 Meter Long 70 mm Top X 155 mm

bottom dia, 3 mm thickness with 260mmX260mmX16mm base plate,

4-M24 Bolts and 750mm long with necessry G.I J-Bolt.Approx Pole

weight 97 kg ONE SIDED POLE 90.00 11615.00 Nos

Supplying and erecting street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B

Class GI sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

directed and spread of 2 mtr.with suitable welded stiffener reducer

and with lock nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. Suitable for side

entry fitting brackets of following nos of arms.paint with following nos

of arms. [A] Single Arm Bracket 2 Mtr. 90.00 728.21 Nos

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 150 cm.

Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia

x 45 cm) high upper ground level with necessary curing and finishing

in approved manner.( for 9 & 10 mtr pole) 90.00 1652.36 Nos

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

& transparent cover erected as required with necessary connection

erected as directed. 5.00 3168.37 Nos

Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III 5.00 2782.55 Nos

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

wire. 5.00 368.65 Nos

Supplying and Erecting of L.E.D. type High bay fixture having Power

Consumption of following watts with, Input Voltage 110 - 290 V.AC

with full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED

Driver used for maximum power saving, Best Quality Aluminium alloy

housing and aluminium Dome for better heat dissipation, CCT Cool

white (6000K), CRI 80, Beam angle > 120 degrees, working

temperature -20 deg c to +55 deg c, Body IP 65 (B) 150 to 200 watts

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85% as per approved vender list

make (fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (D) LED Strip Light (ii) Minimum 7.2W -

240 LED per meter,(2 wire, IP-65) with non integral suitable

Driver complete. Cat-III 972.00 220.18 Rmt

Supplying and erecting LED outdoor fittings with LEDs of wattage7-

Watt bollard light of make of light tree - LT-590 180.00 1818.00 Nos

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA (UDP-88) YEAR-2023-24

NAME OF WORK :- CONSTRUCTION WORK OF CIRCLE WITH STATUE

LOCATION : NEAR SANSKAR MANDIR, SAVARKUNDLA.

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. (i) R.C.C. work 9.76 1082.35 Cumt

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

upto all lead and sretta 19.41 157.16 Cumt

Providing and laying cement concrete work 1:2:4 (1-Cement: 2-

Coarse sand : 4-graded stone aggregates 20mm nominal size) and

curing complete including cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and Mass concrete 36.16 4094.10 Cumt

Providing formwork of ordinary timber planking so as to give a rough

finish including centering shuttering strutting and propping etc.

Height of propping and centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (A) Foundations Footings

Bases of Columns etc. and Mass concrete. 11.70 183.73 Cumt

Providing and laying 1:3:6 (cement :3 Course sand :6 crushed stone

aggregate 20 nominal size) and curing complete including cost of

form work in (A) Wall caps/copping 2.49 4152.60 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (C) Slabs, landing, shelves,

Balconies Lintels, Beams, Girders and Cantilever upto floor two

level. 0.73 4644.03 Cumt

Providing and laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarse sand : 4-graded stone aggregates 20mm nominal size) and

finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement for R.C.C work in

(B) COLUMNS: (i) Having cross-sectional area 0.05 to 0.08 Sq.M 0.62 11715.08 Cumt

Providing, Supplying & Installing cast iron pole with Lamp monted on

top of the pole of height 100" with 2 arm bracket without globe as per

design & specification given by Engineer-in-charge including all taxs,

transporatation, labour but without gst. 6.00 14140.00 Each

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Filling in Garden with selected Black Garden soil from excavated

material and all type of labour transportation including of Spreading 46.45 519.14 Cumt

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20cm. in depth

consolidating each disposited layer by ramming and watering. 22.47 136.92 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 19.65 4248.12 Cumt

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick backing coat

of Cement Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing

coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc. complete

Providing and laying Black Granite stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray

cement slurry including rubbing and polishing complete. (A) Granite

slab 18mm thick 135.72 2992.63 Sqmt

Labour Charge Full Round Edge for Granite 83.63 43.43 Rmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete 73.29 120.26 Sqmt

Providing and fixing 0.90 mt height stainless (304 Grade) steel stair

railling by top rail of 50mm dia.x16G pipe providing vertical support

of 32x32 Sq. x 16G Pipe and Hori. Supports Pipe of 16mm x 16G

No. Row including grinding, cleaning and filling the welded spots with

SS finish and including of labour transportation loading, unloading

and all tex etc. complete. 32.36 3521.87 Rmt

Providing and fixing Sardar Vallabhbhai Patel Sculpture Statue of

Unity Model with Base Like Statue of Unity Size : 8' Height Material :

Bronze Metal Weight : 600 Kgs. to 650 Kgs. Approx. Composition of

Metal : 85% Copper, 5% Tin 5% Zinc, 5% Lead (Variation ± 1%)

Government Approved Lab Metal Testing Certificate Provided

Coating : As Suggest by Engineer (Auto Grade Exterior Coating) and

including of labour transportation loading, unloading and all tex etc.

complete. 1.00 768610.00 Rmt

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface with

machinery like Hammer driller or JCB use. 100.00 357.54 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in

existing trench for laying of cable. below ground / road surface for

enclosing cable 90mm Dia 100.00 95.95 Rmt

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. (A) 4 core 10 Sq. mm 50.00 676.70 Rmt

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. (A) 3 core 2.5 Sq. mm 24.00 215.13 Rmt

Supplying and Erecting of L.E.D. type High bay fixture having Power

Consumption of following watts with, Input Voltage 110 - 290 V.AC

with full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED

Driver used for maximum power saving, Best Quality Aluminium

alloy housing and aluminium Dome for better heat dissipation, CCT

Cool white (6000K), CRI 80, Beam angle > 120 degrees, working

temperature -20 deg c to +55 deg c, Body IP 65 (B) 150 to 200 watts

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium casted

body with company mark/name 160V to 270V,Power Factor more

than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt , LED driver efficiency > 85% as per approved

vender list make (fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (D) LED Strip Light (ii) Minimum

7.2W -240 LED per meter,(2 wire, IP-65) with non integral

suitable Driver complete. Cat-III 61.77 220.18 Rmt

Providing & erecting 240 V MCB double pole switch for lighting Load

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity - Cat-III 12.00 278.76 No

Preparation of beds for hedging and shrubbery by excavating 60 cm

deep and trenching the excavated base to a further depth of 30 cm,

refilling the excavated earth after breaking clods and mixing with

sludge or manure in the ratio of 8:1 (8 parts of stacked volume of

earth after reduction by 20% : one part of stacked volume of sludge

or manure after reduction by 8%), flooding with water, filling with

earth if necessary, watering and finally fine dressing, leveling etc.

including stacking and disposal of materials declared unserviceable

and surplus earth by spreading and leveling as directed, within a

lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or

extra earth to be paid for separately) 23.10 225.08 Cumt

Supplying and stacking of good earth at site including royalty and

carriage upto 5 k m lead complete (earth measured in stacks will be

reduced by 20% for payment). 16.17 520.76 Cumt

Supplying and stacking sludge at site including royalty and carriage

upto 5 km lead complete (sludge measured in stacks will be reduced

by 8% for paymen. 12.00 296.94 Sqmt

Grassing with selection No. 1 Doob grass including watering and

maintenance of the lawn for 30 days or more till the grass forms a

thick lawn, free from weeds and fit for mowing including supplying

good earth, if needed (the grass and good earth shall be paid for

separately). In rows 5 cm apart in both directions 12.00 454.50 Sqmt

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

materials & emitters. 50.00 253.83 Rmt

Providing and Displaying Acalypha twisted well developed with fresh

& healthy 30 cm ht. as per direction of the officer-in-charge. 100.00 40.40 Nos

Providing and stacking of Cycus cirsnallis well developed with fresh

& healthy 35 to 40 lush green leaves as per direction of the officer-in-

charge. 4.00 1919.00 Nos

Providing and Displaying Adenium Obesum well developed with

fresh & healthy 4 to 5 branch 60 to 75 cm ht. as per direction of the

officer-in-charge. 100.00 555.50 Nos

Providing and displaying of Croton Golden specimen having ht.

cm to 1.05 cm with 5 to 6 branches, well developed, fresh and

healthy foliage in 30 cm size of Earthen pot/Plastic pot as per

direction of the officer-in-charge. 100.00 169.68 Nos

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Savarkundla Nagarpalika

Amreli Savarkundla

Chief Officer President

Savarkundla Nagarpalika Savarkundla Nagarpalika

Savarkundla Savarkundla