MAINT AND REPAIRS TO EOT AND HOT CRANES INCL COMPREHENSIVE MAINT AND REPAIRS TO LIFT AND CONNECTED ITEMS AT AFS BIDAR

Comprehensive maintenance of EOT Crane, of 5 ton capacity of bay length 30.0 metres, span 7.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, greasing under moving parts, checking bearings, load test (verticality test and deflection test) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc, once in a month complete all as specified and as directed.

Comprehensive maintenance of EOT Crane, of 2 ton capacity of bay length 12.0 metres, span 4.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, greasing under moving parts, checking bearings, load test (verticality test and deflection test) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc, once in a month complete all as specified and as directed.

Comprehensive Maintenance of EOT Crane, of 1.5 ton capacity of bay lenth 15.0 metres, span 4.0 metres and height of lift 4.0 metres from floor level including monthly maintenance, greasing under moving parts, checking bearings, load test (verticality test and deflection test) and maintenance of crane panel, thrusher brakes, electric motors, steel ropes, crane cabin, limit switches, all electrical and control cables, bus bars, gear oil, pendants along with push buttons etc, once in a month complete all as specified and as directed.

Note for Item Nos 1, 2 & 3 :- (a) Cost of bearings, fixed/finger contacts, spare kits for starters, renewal of unserviceable gears, greasing to wheel drum and the ropes, renewal of push buttons, limit switch, control panel fuse, thermal relay, under voltage relay, power contactors, internal wiring of LT panel board, interconnections of other miscellaneous spares not covered under the scope of work but required for complete satisfactory comprehensive maintenance of the crane except those listed below under Serial item Nos. 04 to 10 shall be deemed to include in the unit rate quoted. (b) Cost of repairs / testing such as load test with 10% extra load, thrusher brakes, rewinding of electric motors, steel ropes, control cables, gear oil will be measured and paid separately under relevant items of this BOQ. (c) Labour element of spares listed below as SUPPLY ONLY also deemed to be included in the unit rate quoted. (d) The contractor has to employ minimum one experienced and trained electrician having full knowledge on cranes and one helper to carry out the regular maintenance on ever month under directions of OEM auth/approved service engineer person for smooth and effective functioning of Cranes and the cost deemed to be included in the unit rate quoted by the contractor.

(e) Any complaints regarding breakdown will be attended with in 24 hours failing which an amount of Rs. 1000/-per day till completion of the complaint rasied will be deducted from the RAR due to the contractor. (f) Contractor Technician is responsible for cleaning and maintenance for EOT/HOT cranes under monthly maintenance. (g) Necessary tools & plants like ladder etc., required to attend the break down if any, shall be provided by the contractor and the cost is deemed to include in the unit rate quoted. (h) The contractor should submit the identity proof of Technician/Person visiting the site and also responsible for the integrity of the personnel attending the break down and monthly visits. (j) Full load test with 10% over load to be carried out once in the currency of the contract and the rates will be measured and paid under respective item accordingly. Make :- Balaji Engineering Works / Tojym Steel Products / S K Cranes

M & L for carrying out full load test (with 10% extra load) of EOT Crane, of 5 ton capacity including carrying out verticality test and deflection test in the presence of the user and duly test in all respects whatever technical requirements need by the user complete all as specified and as directed.

M & L for carrying out full load test (with 10% extra load) of EOT Crane, of 2 ton capacity including carrying out verticality test and deflection test in the presence of the of the user and duly test in all respects whatever technical requirements need by the user complete all as specified and as directed.

M & L for carrying out full load test (with 10% extra load) of EOT Crane, of 1.5 ton capacity including carrying out verticality test and deflection test in the presence of the user complete all as specified and as directed.

Maintenance and servicing of Scissor lift of 500 Kg load capacity operated on electric supply 440 volt, electric motor 1.5 KW/2.2KW control valve make ABB, hydraulic pump of V-Tech make, control panel at bottom with structural member of rectangular MS box and having 02 No Piston, failure protection lock/jack with hand rail duly checking/servicing and overhauling the scissor lift components and moving parts with suitable solutions and including testing the all the parameters reference taking from user manual/OEM maint norms/directions like load test, hydraulic,pneumatic and working/floor/railing height operations with suitable weights and fill the hydraulic oil at desired levels complete all as specified and as directed.

M&L for servicing/repair/maint of hand operated crane capacity upto 1.5 Ton duly checking/servicing and overhauling the crane components and moving parts with suitable solutions and including testing the all the parameters reference taking from user manual/OEM maint norms/directions such as load test (verticality test and deflection test) and maintenance of crane/lift, thrusher brakes, steel ropes, crane cabin, controlling devices,and provide suitable load to test the equipment by hydraulic,pneumatic efficiencey tests and working/floor/railing height operations with suitable weights and fill the hydraulic oil at desired levels all as specified. Noteduly mechnical moving parts, fill gear oil at desired levels, pendants along etc.complete all as specified and as directed.