CA NO GE SOUTH AMB 35 2020 2021 REPAIR REPLACEMENT TO ROOF TREATMENT ROOF SHEETING AND FALSE CEILING IN OTM AND MARRIED ACCN OF AGE BR I AT SOUTHERN ZONE UNDER GE SOUTH AMBALA CANTT

Amount

Dismantling asbestos cement corrugated or semi-corrugated sheets including AC ridges etc., as in roof covering, complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Framed/unframed), complete, all as specified and as directed.

Supply and fixing roof trusses (framed), trussed purlins / purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including gusset plate, bed plate, distance pieces, cleats etc fixed in position,conforming to Fe-410(Gde 250) including making good distrubed portion, complete all as specified and directed.

S&F Pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed.

S&F Pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer, complete all as specified and directed.

Material and labour for 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts complete all as specified and directed.

Material and labour for Asbestos Cement two piece unserrated ridge 6 mm thick fixed with L hook or Cranked bolts complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks burnt, old size, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified

Material and Labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified and as directed. (NOTE : - The serviceable bricks obtained from demolition/dismentling will be used after removing motar, cleaning the bricks with water, etc.)

Dismantling existing flase ceiling tiles with grid of any type etc including frame work complete all as specified and directed. [Existing flase ceiling tiles with grid of any type].

Supply and fixing Rajshri brand PVC False Ceiling consisting of 600mm x 600mm, 5mm thick plain embossed PVC Sheet of Density 600 Kg / Cum manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodized aluminum "T" section of size 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2' x 2' (600x600mm). The aluminum framework supported from the ceiling with the help of 'J' hook and GI wire 4mm of required sizes to maintain proper level etc. The aluminum framwork supported on side wall with the use of aluminum "L" section of size 1"x1" (25x25mm) angles etc. complete as per direction of Engineer-in-Charge shall be fixed and be manufacture's specification complete all as specified and directed.

Resecuring existing grid of false ceiling in patches of any type by way of fixing hangers (GI wire of 4mm dia) to be fixed by consisting of HLS sleeves anchor fastenerof thread size 6.5 mm x 25/5 with soffit cleat made of galvanised steel of size 27 mm x 37 mm x 25 mm x 1.6 mm and level clip of dimensions of 85 mm x 30 mm x .8 mm at 600 x 1200 intervals and fixing of false ceiling tiles matching with same colour / type as existing at site and as directed by Engineer-in-Charge. NOTE: - Supply of false ceiling tiles will be measured and paid seperately.

Supply only false ceiling "TEGULAR EDGE TILES" of perforated with fleece 595 x 595 x 0.5 mm having galvanizing of 100 gms/Sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes in global white Powder Coated with 60-70 Micron front coating laid, humidity resistance (RH) of 100%, light reflection of 62%, backing of rock wool pads to have max NRC 0.8 including PVC clips to hold the ceiling tile, complete all as per manufacturer instructions, complete all as specified and directed.

Supply only 4mm thick plain non-asbestos cement building boards of size (600 x 600) mm (fixed as in existing false ceiling colour matching with existing false ceiling complete all as per the manfacturer's instructions complete all as specified and directed.

Supply only 600 mm x 600 mm x 15/16 mm thick mineral fibre ceiling tiles, fine texture, ordinary type fixed as in existing false ceiling matching with colour complete all as per the manfacturer's instructions complete all as specified and directed.

Disconnecting existing tanks exc 250 and n.exc 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion etc complete all as specified and directed.

All as per item No 18.00 above but capacity exc 500 ltrs but n. exc 1000 ltrs complete all as specified and directed.

Dismantling of brick tiles or terracing tiles in single layers on roofs complete all as specified and directed.

Roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness plaster and leaping (Whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for 50 mm thick (average) PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding, levelling course, including providing neat cement slurry @ 3Kg/ Sqm including preparing slab surface with wire brushing complete and finishing top surface of PCC rough & even to receive the bedding layer including necessary formwork and bedding layer of 10mm thick cement plaster in CM (1:4) using WPC @ 2% by the weight of cement on RCC roof slab including cleaning of existing complete all specified and directed by Engr in charge.

Material and labour for water proofing treatment with following application over roofs surface complete, all as specified and as directed :- (i) Applying bituminous primer at the rate of 0.4 Litres/Sqm as per IS 3384-1986 on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated. (ii) Applying one coat of blown type bitumen of grade 85/25 as binding material conforming to IS-73 at the rate of 1.2 Kg/Sqm. (iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface. (iv) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only with Gurantee of 10 years by contractor. NOTE : - The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009).

All same as item No 24.00 above but also applying two coats of bituminous based Aluminium paint @ 0.2 kg/sqm over APP membrane including preparation of surface complete all as specified and directed.

Material and labour for 40mm thick bricks tiles over and including 15mm thick bedding layer in CM (1:6), jointed and pointed in CM (1:3) mixed with linseed oil @5% by weight of cement complete all as specified.

All as per serial item No 26.00 above but using old bricks retrieved from dismantling against item No 20.00 here-in-before.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

Material and labour for providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges, type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

Supply and fixing (in repair), water storage tank 500 litre capacity HDPE double layer ISI marked fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore,and removing old complete all as specified and as directed.

All same as item No above but of 1000 litre storage capacity complete all as specified and directed.

S & F 15 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old servicable steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Refixing old servicable steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed .

Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed .

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified (ISI marked).

Supply and fixing in repairs 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone, size not exceeding 0.25 sqm, fixed on with and including backing coat 10 mm thick in cement mortar 1:4, set ,jointed & pointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade,making V groove at top and bottom of stone , drilling holes for hold fastener applying silicon treatment including rubbing & polishing to achieve mirror finish complete all as specified and as directed.

Demolition of lime concrete or cement conrete of any description and in any position as of sunken portion complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid light shade coloured ceramic tiles, area of each tile not exceeding 0.06 but not exceeding 0.11 Sqm 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified and as directed.

Dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and directed.

Material & Labour for glazed ceramic tiles of size 300x200x6 to 7mm thick as in skirting and dado on vertical surfaces including 10mm thick backing coat in cement mortar 1:3 set and jointed in neat cement slurry or with adhesive as per manufacturers instructions and pointed in white/ coloured cement, complete all as specified.

Supply and fixing in repair vitreous China white squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including making good to floor surface with the existing surface and connection to flush pipe complete all as specified and as directed.

Supply and fixed in repair vitreous china wash down water closet pedestal pattern, coloured including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, plastic water closet seat cover closed pattern with mild steel chromium plated hinges complete all as specified and as directed.

Supply and fixing (in repair), 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection including PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and as directed.

Supply and fixing ( in repair), bib tap, screwed down high pressure cast copper alloy with capstan head, screwed down suitable for 15mm bore pipe or union, complete all as specified and as directed.

Dismantling of PVC (SWR pipes any length including bends etc complete all as specified and directed.

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to walls with stack clamps or in floors, complete all as specified and directed. (Note : - Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall confirm be to IS 5382-1985)

Supply and fix 75mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed. (Note- UPVC fittings shall be conforming to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Material and labour for rendering 15 mm thick in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement or as per manufacturer’s instructions, on concrete surfaces of sunken portion, finished even and smooth complete all as specified and directed. NOTE : - Supply only integrated water proofing compound shall be measured and paid for separately.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm over concrete surface, complete all as specified and directed.

Material and labour for lime concrete with 40 mm graded brick aggregate, using lime mortar 1:3 as in sunken portion at first/second floor ,complete all as specified and directed.

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed. (NOTE : Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

PARVEEN KUMAR

Gupta Enterprises

S M BUILDERS