Repair of damaged road near the residence of judge cum CJM Nahan Distt Sirmour

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundationtrenches or drains ( Not exceeding 1.50 meter in width or 10 square metres on plan ), including dressing of sides & ramming of bottoms, all lifts, shifting of interlock tiles to MC Office, including getting out the excavated soil & dispiosal of surplus excavated soil as directed, within all lead of Ordinary rock, including all leads,lifts & carriage of materials and shifting ( As per code No. 2.9.1 page 65 ) .

Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering-All work upto plinth level in cement concrete 1 : 5 : 10 ( One cement : five coarse sand : ten graded stone aggregate 40 mm nominal size ), including all leads,lifts & carriage of materials & to the enrire satisfaction of the Engineer-in-charge.

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( One cement : two corase sand : four graded stone aggregate 20 mm nominal size) ( As per code No. 4.1.3 Page 73 ) .

Providing & laying factory made chamfered edge cement concrete paver blocks in footpath,parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand & cutting of paver block as per required size & pattern, finishing & sweeping extra sand, complete all as per direction of Engineer-in-Charge,80 mm thick cement concrete paver block of M-30 grade with approved colour design & pattern, including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge ( As per code No. 16.91.2 page 251 ) .

Edges of slabs & breaks in floors & wall under 20cm wide, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per code No. 5.9.16.1 Page 81 ).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement andmatching pigment etc., complete & to the entire satisfaction of Engineer-in-charge ( As per code No. 11.37 Page 171 ) .