REPAIR TO BOUNDARY WALL, FENCING, AREA DRAIN, FOOTPATH HARD STANDING AND GATE AT ME LINE AND COD AREA UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Demolition of concrete in ground floors and paying not exceeding 15cm thick (below of above ground level).

Demolition of brick/stone masonry built in cement mortar all as specified.

Dismanteling MS works of any Desc. Not otherwise provided for

M & L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and bed concrete.

M&L Hardcore of broken stone of guage nexc. 63 mm deposited spread and levelled in layers nexc. 15 cm thk watered and rammed to true surface.

M&L for 75mm thick PCC type D2 (1:4:8, using 40mm graded stone aggregate) as in sub base of interlocking reflective pavers block & chequered cement concerete tiles.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified and directed by Engr-in-Charge at site.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in edging all as specified and directed.

M/L cement concrete type B-2 1:2:4 (40mm graded agg) 100mm thickness

M&L for chequered cement concerete tiles 20cmx20cmx25mm thick, set , jointed and pointed in neat cement sluury as in floors with grey cement and pigment incl 15mm thick screed bed or bedding layer 20mm thick in cm 1;6 .

M & L for brick work with sub class "B" brick st or curved on plan exceeding 6 mtr mean radious and built in cm 1:6 .

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces finished even and smooth.

M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded aggregate in sub base.

M & L 50 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.

Dismanteling fencing wire mesh, any type.

Dismanteling post, struts, (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank.

S&F flat iron straps to chain link fencing including drilling bolting or riveting etc as directed.

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete.

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire.

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips.

S&F GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. All as specified (Each line of wire to be measured.)

M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth.

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth.

M&L for forming construction joints 65mm deep x 10mm wide filled with sealing compound Grade "A".

M&L for PCC type B1 (1:2:4, using 20mm graded stone aggregate) as in coping.

M/S SUGAM CONSTRUCTION

PREETI ENTERPRISES

A S Shingote

M/S OMKAR DEEPAK DHAVAN

M/S SURAJ A POUL