Providing functional house hold tap Connection ( FHTC) to various villages of Gangath area in Tehsil Indora Distt. Kangra H.P. under JJM

Amount

SOURCE ZONE-5 (LWSS Ghoran Small) Drilling and lowering of assembley and development of Tube well 90 mtrs. Deep with Rotary Rig .

SOURCE ZONE-6 (LWSS Lakhanpur (Mehkar Theru) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-7 (LWSS Mangwal pHase- Ist and IInd) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-8 (LWSS Charoor Bhadroot) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-9 (LWSS Baniana Manwal Nanglian) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-10 (LWSS Gangath) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-12 (LWSS Attara ) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-15 (LWSS Manwal Nanglian ) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

SOURCE ZONE-16 (LWSS Makroli Chatter Phase-IInd ) Drilling and lowering of assembley and development of Tube well 100 mtrs. Deep with Rotary Rig

PUMP HOUSE Designing, Constructing, Testing & Commissioning of Pump House & Chowkidar Room at following Locations including all allied Civil Works , Electrical works, Sanitay work, Site development, cutting/excavation in all kinds of soils, C/o PCC/RCC Retaining walls, Breast walls, Toilets, Septic Tanks, internal and External Solar powered Street lighting, External landscaping, Fire Fighting arrangement, Gantry Crane, dewatering etc complete as directed by engineer in charge The rates quoted by the contractor shall be for the complete work. All ancilliary works and accessories required to make the system fully functional shall be included in the cost of work. Nothing extra shall be paid on this account. refer to data sheet No 1

PHASE-I ZONE-5 (LWSS Ghoran Small) Construction of pump house cum attendent Room

PHASE-I ZONE-6 (LWSS Lakhanpur (Mehkar Theru) Construction of pump house cum attendent Room

PHASE-I ZONE-7 (LWSS Mangwal pHase- Ist and IInd) Construction of pump house cum attendent Room

Construction of boundary wall around the pump and water storage tanks ( Pillars to be constructed in brickwork and fencing panels of standard size i.e. 1.20x1.80 ) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge. refer to data sheet No 1 (i)

ZONE-5 (LWSS Ghoran Small)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd)

ELEVATED MAIN & SERVICE RESERVOIRS Designing, Constructing, Testing & Commissioning R.C.C. Elevated Circular Over head storage tanks as per capacity given below at various stages/sites including excavation in all kinds and types of strata, soil strata including dewatering in M30 design mix in foundation, walls, bottom slab , roof slab/dome with smooth finishing in 1:3 inside the tank, all alied Civil Works, Site development, cutting/excavation in all kinds of soils, C/o PCC/RCC Retaining walls, Breast walls, refilling and disposing of surplus stuff with in all leads and lifts, labour and material charges. The job also includes providing lowering, laying, erecting, hoisting and jointing of pipe assembly for inlet, outlet, overflow and scour pipeproper manifiold at outlet including all fittings, bye pass arrangement consisting of GI / MS pipes special and valves of required classes and dia and all other accessories required such as MS ladders inside and outside ventilator with mosquito proof wire mesh,lightening arrester complete ,SFRC manhole covers including frames and covers (medium duty) with proper locking arrangement water level indicator, RCC frames for all valves ventilating shafts shall also be provided including all leads and lifts as per entire satisfaction of Engineer-in-Charge. The tanks shall be hydraulically tested for water tightness all works shall be conforming to relevant IS code. The cost of valves & other accessories shall be included in the rates of tanks . Battery Limit shall be considered as 3.00 m from the edge of the structure or the boundary of the land whichever is less.The rates quoted by the contractor shall be for the complete work. All ancilliary works and accessories required to make the system fully functional shall be included in the cost of work. Nothing extra shall be paid on this account.The work shall include supplying of Five sets of structural design after testing the bearing capcity of soil and drawings, etc complete as directed by engineer in charge as per relevent data sheet and scope of work. refer to data sheet No 2

ZONE-5 (LWSS Ghoran Small) RCC Overhead tank 20,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-5 (LWSS Ghoran Small) RCC Overhead tank 70,000 litre capacity with 15 mtrs. Staging height at Node-2A

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) RCC Overhead tank 30,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) RCC Overhead tank 40,000 litre capacity with 10 mtrs. Staging height at Node-3

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) RCC Overhead tank 40,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) RCC Overhead tank 80,000 litre capacity with 10 mtrs. Staging height at Node-3

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) RCC Overhead tank 20,000 litre capacity with 10 mtrs. Staging height at Node-4

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) RCC Overhead tank 40,000 litre capacity with 10 mtrs. Staging height at Node-4

ZONE-8 (LWSS Charoor Bhadroot) RCC Overhead tank 30,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-9 (LWSS Baniana Manwal Nanglian) RCC Overhead tank 30,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-9 (LWSS Baniana Manwal Nanglian) RCC Overhead tank 20,000 litre capacity with 10 mtrs. Staging height at Node-4

ZONE-10 (LWSS Gangath ) RCC Main storage tank 80,000 litre capacity with 1 mtrs. Height at Node-1

ZONE-10 (LWSS Gangath ) RCC Main storage tank 3,00,000 litre capacity with 10 mtrs. Height at Node-3

ZONE-10 (LWSS Gangath ) RCC Main storage tank 40,000 litre capacity with 10 mtrs. Height at Node-4

ZONE-12 (LWSS Attara ) RCC Overhead tank 30,000 litre capacity with 1 mtrs. Staging height at Node-1

ZONE-12 (LWSS Attara )RCC Overhead tank 1,20,000 litre capacity with 10 mtrs. Staging height at Node-1

ZONE-15 (LWSS Manwal Nanglian ) RCC Overhead tank 20,000 litre capacity with 10 mtrs. Staging height at Node-1

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) RCC Overhead tank 30,000 litre capacity with 1 mtrs. Staging height at Node-3

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) RCC Overhead tank 80,000 litre capacity with 10 mtrs. Staging height at Node-4

RISING MAIN Excavation in foundation, trenches ( for pipes & pits) upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, blasting soft/ hard rock or chieselling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, leveling of beds to correct grade i/c shoring /strutting , planking, timbering & dewatering wherever required, stacking the useable & unuseable material /soil separately & after laying jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposoited layer by ramming & watering & then disposing of all surplus excavated soil /unusable material as directed with in all leads & lifts including restoration metaled , unmetalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-charge.

ZONE-2 (LWSS LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd)

ZONE-5 (LWSS Ghoran Small)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd)

ZONE-8 (LWSS Charoor Bhadroot)

ZONE-9 (LWSS Baniana Manwal Nanglian)

ZONE-10 (LWSS Gangath )

ZONE-12 (LWSS Attara )

ZONE-15 (LWSS Manwal Nanglian )

ZONE-16 (LWSS Makroli Chatter Phase-IInd )

Providing , laying, jointing & testing with circumfrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) steel flanged pipes after every 100 mtr of pipe of following diametr .Conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, etc. as per site requirement made from parent tubes . The laying of pipe shall also include flanged joints duly welded in three layers (One inner & two outer), where ever required as per direction of the Engineer-in-charge (Earth work in trenches and the cost of providing flanges i/c nut & bolts, gasket will be measured and paid for separately) and all operations such as cutting, welding, jointing, fabrication of tees i.e. lowering and laying in excavated trench to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The damaged portion of the pipes and all the specials ( If damaged during laying & jointing operation of pipe) made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing, D.P. test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. refer to data sheet No 3

ZONE-2 (LWSS LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 65 mm dia (MG) (PE) Table-17

ZONE-2 (LWSS LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 65 mm dia (MG) (PE) Table-28

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-5

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-17

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-28

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 40 mm dia (MG) (PE) Table-17

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 40 mm dia (MG) (PE) Table-28

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-5

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-17

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-28

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 80 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-17

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-28

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-17

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-28

ZONE-8 (LWSS Charoor Bhadroot) 65 mm dia (MG) (PE) Table-5

ZONE-9 (LWSS Baniana Manwal Nanglian) 80 mm dia (MG) (PE) Table-5

ZONE-10 (LWSS Gangath ) 125 mm dia (MG) (PE) Table-5

ZONE-10 (LWSS Gangath ) 125 mm dia (MG) (PE) Table-17

ZONE-12 (LWSS Attara ) 80 mm dia (MG) (PE) Table-5

ZONE-15 (LWSS Manwal Nanglian ) 40 mm dia (MG) (PE) Table-5

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-5

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-17

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-28

Providing , Welding & fixing of MS flanges to confirming to IS 6392-1971 ( Latest with upto date amendments) of flange table with MS tubes in one layer on outer face & one layer on inner face to make the joint leak proff. The thicknes of gasket not less then 3.00 mm confirming to IS 2712-1965 complete in all respect and to the best satisfaction and direction of Engineer -in-charge with in all leads & lifts. Flange to be welded after 6 mtr interval of pipe.

ZONE-2 (LWSS LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 65 mm dia (MG) (PE) Table-17

ZONE-2 (LWSS LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 65 mm dia (MG) (PE) Table-28

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-5

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-17

ZONE-5 (LWSS Ghoran Small) 65 mm dia (MG) (PE) Table-28

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 40 mm dia (MG) (PE) Table-5

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 40 mm dia (MG) (PE) Table-17

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-5

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-17

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 65 mm dia (MG) (PE) Table-28

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 80 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-17

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (MG) (PE) Table-28

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-5

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-17

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 80 mm dia (MG) (PE) Table-28

ZONE-8 (LWSS Charoor Bhadroot) 65 mm dia (MG) (PE) Table-5

ZONE-9 (LWSS Baniana Manwal Nanglian) 80 mm dia (MG) (PE) Table-5

ZONE-10 (LWSS Gangath ) 125 mm dia (MG) (PE) Table-5

ZONE-10 (LWSS Gangath ) 125 mm dia (MG) (PE) Table-17

ZONE-12 (LWSS Attara ) 80 mm dia (MG) (PE) Table-5

ZONE-15 (LWSS Manwal Nanglian ) 40 mm dia (MG) (PE) Table-5

ZONE-15 (LWSS Manwal Nanglian ) 40 mm dia (MG) (PE) Table-17

ZONE-15 (LWSS Manwal Nanglian ) 40 mm dia (MG) (PE) Table-28

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-5

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-17

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 80 mm dia (MG) (PE) Table-28

Submersible Pumping Machinery:- Supply of Submersiblel Pumping Set of Calama/KSB/Crompton/SU/Johnston conforming to BIS-8034-1976 (Latest) suitable for clear water fitted with bronze Impellers or suitable alloys directly cooupled to squirrell cage electric Induction Motor of same make as that of Pump conforming to BIS:9283-1979(Latest with uptosate ammendments) and totally water proof for Submersible duty,isolated from the pump by intermediate casing with double Mechanical seal in oil chamber,grease packed lubricated bearings and provided with stainless steel thrust bearing plate to withstand non-vertical loads with minimum wear and tear. It should also be fitted with a device to take-up expansion of water with the heating of motor including water level guard,erection clamps,cable clips and depth gauge etc. The Pump shall be suitable for operation on data given below including Pump sets (working ), necessary piping and control valves alongwith electrical works including all taxes, insurance, transportation, freight charges, inspection charges, loading, unloading, conveyance to Departmental stores/ site, stacking, etc. including earthing ,specials and wastage etc.; complete as per Tender Specifications, technical data Sheets and instruction of Engineer in charge. refer to data sheet No 4 for Boq item No 16.03 to 16.11

Starter:- Variable frequency drive starter of required HP Heavy Duty for smooth start and smooth stop of pumps and for the energy conservation in the system. It Should be capable to control the frequecy of pumps through out the operation and also should be capable to maintain the power factor of the system within acceptable limits. It should have ambient temperature 50 Degree without derating and have conformal coating class 3C2, so that it can work in any harsh environment like moisture etc. Make: Aarmation Electric Private Limited/MAS/ELLES along with following accessories:- refer to data sheet No 4 for Boq item No 16.03 to 16.11

(i) Multi function meter indicating different parameters like Current, Voltage, KWH, PF, THD etc with RS 485 communication Make L&T/Conserve/Siemens (1 Nos ) 3(II) MCB/MCCB suitable capacity of L&T / standard make on the coming feeder for pumping set confirming to BIS 2516-1985 ( Latest edition) with natural linked under voltage release ( 1 NO. ) 3(iii) Three phase indicating lamps complete with logged switches for individual motore confirming to BIS 3452 ( Part I &II) latest with upto date amendments ( 1 No. ) 3(iv) Incommer MCCB with proper short circuit capability for both the starters make L&T / Schinieder/ ABB ( 1 No. ) 3(v) On / Off indicator and push button, control and power wiring Power capacitor ,Cooling fan 230 VAC Control terminal , Buss Bar i.e. Bolt , insulator etc ( 1 No. ) 3( vi) Input Choke which shold be installed at the input of VFD strter, so that there should be proper protecion in case of any voltage surge and distortions in signal ( 1 NO.)3( vii) Control Transformer to safeguard the control circuit of all the components from the voltage surges and spikes ( 1 No. ) 3( viii) Output contractors in the output of VFD to run the pump ( 1 No.) 3 ( ix) Transportation and Carriage Charges for panel till site ( 1 No ) 3(x) Programmable logic controller with appropriate digital and analog inputs and outputs to give automatic command to star delta and slso will gete from from Multi Function Meter for Current, Voltage , KWH PF and THD Make Mitsubishi / L&T Delta ( 1 No) 3(xi) HMI 7" display with IOT to give on and off command manually and also to show pump running and breakdown status at pump station Make Wientek/ Exor /Mitsubishi /Mecon ( 1 No. )3(xii) Supply of software with license to monitor dta at Laptop /Mobile in form of Software and Mobile Application for 3 users ( 1 No.) 3( xiii) Level Sensor to indicae the water level of tank remotely ( 1 No.) 3 ( xiv) Cloud Gate Way for Data cluding to Server( 1 No.) 3( XV) Cable for Communication for Water Level Sensor ( 1 No.) 3( xvi) Installation and Commissioning for Boq item No 16.03 to 16.11

ZONE-5 (LWSS Ghoran Small) (i) Location of site:- The Site is located at a distance of 12 KMs from from Kandarori Railway station by road. ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 90 Mtrs, vii) LWL in tank/ well- 19 Mtrs., viii) Centre line level of pump 19.00 mtrs. ix) Discharge level of highest point- 79 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=3.32 LPS xii) Static Head in meters _65.63 mts. xiii) Duty/Total head in Mts=64.18 mtrs xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 65 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 3.32 LPS with total head=64.18 Mtr) One stand by.

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) (i) Location of site:- The Site is located at a distance of 30 KMs from from Kandarori Railway station by road. ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs, vii) LWL in tank/ well- 43 Mtrs., viii) Centre line level of pump 43 mtrs. ix) Discharge level of highest point- 103 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=5.42 LPS xii) Static Head in meters _60 mtrs. xiii) Duty/Total head in Mts=64.50 mtrs xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 80 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 5.42 LPS with total head=64.50 Mtr) One stand by

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) (i) Location of site:- The Site is located at a distance of 26 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well - 100 Mtrs., viii) Centre line level of pump 100.00 mtrs. ix) Discharge level of highest point- 103.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point= 6.71 LPS xii) Static Head in meters _60 mts. xiii) Duty/Total head in Mts=64.50 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 80 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 6.71 LPS with total head=64.50 Mtr) One stand by .

ZONE-8 (LWSS Charoor Bhadroot) (i) Location of site:- The Site is located at a distance of 30 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well -19 Mtrs., viii) Centre line level of pump 19.00 mtrs. ix) Discharge level of highest point- 79.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=4.08 LPS xii) Static Head in meters _60.00 mts. xiii) Duty/Total head in Mts=64.60 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 65 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 4.08 LPS with total head=64.60 Mtr) One stand by .

ZONE-9 (LWSS Baniana Manwal Nanglian) (i) Location of site:- The Site is located at a distance of 24 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well - 43 Mtrs., viii) Centre line level of pump 43.00 mtrs. ix) Discharge level of highest point- 103.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=5.01LPS xii) Static Head in meters _60 mts. xiii) Duty/Total head in Mts=63.86 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 80 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 5.01 LPS with total head=63.86 Mtr) One stand by .

ZONE-10 (LWSS Gangath ) (i) Location of site:- The Site is located at a distance of 29 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well - 19.00 Mtrs., viii) Centre line level of pump 19.00 mtrs. ix) Discharge level of highest point- 79 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=14.67 LPS xii) Static Head in meters _98.90 mts. xiii) Duty/Total head in Mts=64.01 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 125 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 14.67 LPS with total head=64.01 Mtr) One stand by .

ZONE-12 (LWSS Attara ) (i) Location of site:- The Site is located at a distance of 26 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL 45 in tank/ well - 43.00 Mtrs., viii) Centre line level of pump 43.00mtrs. ix) Discharge level of highest point-103.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=5.33LPS xii) Static Head in meters _60.00mts. xiii) Duty/Total head in Mts=63.97 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 80 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 5.33 LPS with total head=63.97 Mtr) One stand by .

ZONE-15 (LWSS Manwal Nanglian ) From Node4A to 4 (i) Location of site:- The Site is located at a distance of 22 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well - 49 Mtrs., viii) Centre line level of pump 49 mtrs. ix) Discharge level of highest point- 214.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=0.84 LPS xii) Static Head in meters _165 mts. xiii) Duty/Total head in Mts=212.72 mts xiv) Length of R/Main 1550 mtrs xv) Dia of R/Main = 40 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for0.84 LPS with total head=212.72 Mtr) One stand by .

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) (i) Location of site:- The Site is located at a distance of 39 KMs from from Kandarori Railway station by road . ii) The altitude of place in which pumping set is intended to work:- Altitude of place is 307.00 m above MSL iii) Type of current :- AC three phase with frequency of 50cycles/second iv) Rated Voltage :- 415V ± 10% v) Charactrstics of water:- Clear cold & fresh water a) Temperature _20_ °C, b) Turbidity upto 10 NTU, c) pH 6.5 to 8 d ) Total solids :-600mg/litre, f) Others-----, (vi) Depth of T/well 100 Mtrs. vii) LWL in tank/ well - 19 Mtrs., viii) Centre line level of pump 19 mtrs. ix) Discharge level of highest point- 79.00 mtrs. x) Nos of pumps reqd. _2_ Nos. pumps xi) Discharge at Duty Point=4.58 LPS xii) Static Head in meters _60 mts. xiii) Duty/Total head in Mts=63.72 mts xiv) Length of R/Main 15 mtrs xv) Dia of R/Main = 80 mm xvi) Pumping hours per day- 8 hours xvii) Limits of pump operation (-) 15% to (+) 10% of Total head at duty point xviii) HP of motor /Drive unit ---, Power absorbed or Required BHP at (-) 15% of Duty head or BHP with margins/multiplying factor at duty point & (+) 10% head , whichever is higher i.e Upto 2 HP = 1.5 , 2 to 5 HP = 1.4, 5 to 10 HP = 1.3 , 10 to 20 HP = 1.2 , 20 to100 HP = 1.15, Above 100 HP=1.10 xix) Efficiency at duty point Minimum 60% xx) R.P.M.of Pumping set -2900, xxi) Test Run-24 hours continueously for 7 days. (2 set for 4.58 LPS with total head=63.72 Mtr) One stand by .

CENTRIFUGAL PUMP SETS Supply Installation Testing & Commissioning with automation (To be paid separately) of horizontal spindle,horizontal/redial split casing/end suction(Back-pull out arrangements) single/double/multi stage star rated centrifugal pump or combination of pumps, of recommended make such as Mather and Platt/KSB/Kirlosker/KSB/Becomuier/Sabar/maoflow as per BIS 1520-1980 with upto date ammendments, read with IS:9137-1978 or latest edition suitable for lifting water for under mentioned characterestics with bronze,impellers/priming funnels,casing ring and shaft sleeves of bronze,shaft of steel grade 45C8/ EN8 with cast iron casing coupled directly through a flexible coupling on a common MS Base Plate to squirrel cage TEFC Energy efficient motors ( Conforming to energy efficiency code IE2 or higher ) of standard make such as Kirloskar /BHEL /CG POWER /Siemens /ABB /Marathon and suitable for operation on 415 (+6% ) and ( -10% ) volts, 50 cycles / second, 3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/pumps in the operation range of (+) 10% and (-)15% of the duty poiint head. The motor/motors as per ISI:325:1978 with upto date ammendments read with IS 900:1972. It should include cost of bearing nuts , bolts and painting etc. and should meet the following requirements: including Pump sets (working + standby ), necessary piping for suction, delivery & common header, alongwith electrical control panel with soft starters; as per requirement of pumping machinery; Complete work inclusive of all taxes,transportation, freight charges, inspection charges, loading, unloading, conveyance to Departmental stores / site, stacking, etc. including specials and wastage etc. It shall include providing and fixing of C.I/C.S Sluice valves of approved make and appropriate class to resist the design pressure and complete as per Tender Specifications and instruction of Engineer in charge. for Boq item No 17.03 to 17.12

Starter:- Variable frequency drive starter of required HP Heavy Duty for smooth start and smooth stop of pumps and for the energy conservation in the system. It Should be capable to control the frequecy of pumps through out the operation and also should be capable to maintain the power factor of the system within acceptable limits. It should have ambient temperature 50 Degree without derating and have conformal coating class 3C2, so that it can work in any harsh environment like moisture etc. Make: Aarmation Electric Private Limited/MAS/ELLES along with following accessories:- for Boq item No 17.03 to 17.12

(i) Multi function meter indicating different parameters like Current, Voltage, KWH, PF, THD etc with RS 485 communication Make L&T/Conserve/Siemens (1 Nos ) 3(II) MCB/MCCB suitable capacity of L&T / standard make on the coming feeder for pumping set confirming to BIS 2516-1985 ( Latest edition) with natural linked under voltage release ( 1 NO. ) 3(iii) Three phase indicating lamps complete with logged switches for individual motore confirming to BIS 3452 ( Part I &II) latest with upto date amendments ( 1 No. ) 3(iv) Incommer MCCB with proper short circuit capability for both the starters make L&T / Schinieder/ ABB ( 1 No. ) 3(v) On / Off indicator and push button, control and power wiring Power capacitor ,Cooling fan 230 VAC Control terminal , Buss Bar i.e. Bolt , insulator etc ( 1 No. ) 3( vi) Input Choke which shold be installed at the input of VFD strter, so that there should be proper protecion in case of any voltage surge and distortions in signal ( 1 NO.)3( vii) Control Transformer to safeguard the control circuit of all the components from the voltage surges and spikes ( 1 No. ) 3( viii) Output contractors in the output of VFD to run the pump ( 1 No.) 3 ( ix) Transportation and Carriage Charges for panel till site ( 1 No ) 3(x) Programmable logic controller with appropriate digital and analog inputs and outputs to give automatic command to star delta and also will gete from Multi Function Meter for Current, Voltage , KWH PF and THD Make Mitsubishi / L&T Delta ( 1 No) 3(xi) HMI 7" display with IOT to give on and off command manually and also to show pump running and breakdown status at pump station Make Wientek/ Exor /Mitsubishi /Mecon ( 1 No. )3(xii) Supply of software with license to monitor dta at Laptop /Mobile in form of Software and Mobile Application for 3 users ( 1 No.) 3( xiii) Level Sensor to indicae the water level of tank remotely ( 1 No.) 3 ( xiv) Cloud Gate Way for Data cluding to Server( 1 No.) 3( XV) Cable for Communication for Water Level Sensor ( 1 No.) 3( xvi) Installation and Commissioning for Boq item No 17.03 to 17.12

ZONE-5 (LWSS Ghoran Small) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 3.32 LPS each with 224.02 mtr. Head

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 1.70 LPS each with 259.72 mtr. Head

ZONE-6 (LWSS Lakhanpur (Mehkar Theru)Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 3.72 LPS each with 281.03 mtr. Head

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 2.23 LPS each with 237.87 mtr. Head

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 4.48 LPS each with 180.80mtr. Head

ZONE-8 (LWSS Charoor Bhadroot) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 4.08 LPS each with 257.92 mtr. Head

ZONE-9 (LWSS Baniana Manwal Nanglian) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 5.01 LPS each with 247.67 mtr. Head

ZONE-10 (LWSS Gangath ) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 14.67 LPS each with 126.55 mtr. Head

ZONE-12 (LWSS Attara ) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 5.33 LPS each with 154.97 mtr. Head

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) Centrifugal Pumps :- centrifugal pumping machinery 2 sets (1 as standby) of 4.58 LPS each with 189.67 mtr. Head

Excavation in foundation, trenches ( for pipes & pits) upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, blasting soft/ hard rock or chieselling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, leveling of beds to correct grade i/c shoring /strutting , planking, timbering & dewatering wherever required, stacking the useable & unuseable material /soil separately & after laying jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposoited layer by ramming & watering & then disposing of all surplus excavated soil /unusable material as directed with in all leads & lifts including restoration unmetalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of engineer-in-charge.

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd)

ZONE-4 (LWSS DPF Lodhwan)

ZONE-5 (LWSS Ghoran Small)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd)

ZONE-8 (LWSS Charoor Bhadroot)

ZONE-9 (LWSS Baniana Manwal Nanglian)

ZONE-10 (LWSS Gangath )

ZONE-11 (LWSS Bali Kyori )

ZONE-12 (LWSS Attara )

ZONE-13 (LWSS Gangath Rapper )

ZONE-14 (LWSS Badial and kuriyali)

ZONE-15 (LWSS Manwal Nanglian )

ZONE-16 (LWSS Makroli Chatter Phase-IInd )

Providing, laying and jointing, testing in trenches galvanised mild steel tubes screwed and socketed, ISI marked, conformining to IS :1239 of make & latest with upto date ammendments including tube fitting such as bends, tees, air valves, unions and collars etc. as per direction and to the entire satisfaction of the Engineer-in-charge (Earth work in trenches to be measured and paid for separately).

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 15 MM dia ( Light class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 20 MM dia ( Light class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 25 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 32 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 40 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 50 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 65 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 80 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 15 MM dia ( Light class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 25 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 32 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 40 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 50 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 65 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 80 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 15 MM dia ( Light class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 25 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 32 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 40 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 50 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 65 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 15 MM dia ( light class)

ZONE-4 (LWSS DPF Lodhwan) 25 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 32 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 40 mm dia (light Class)

ZONE-4 (LWSS DPF Lodhwan) 50 mm dia (light Class)

ZONE-4 (LWSS DPF Lodhwan) 65 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 15 MM dia ( Light class)

ZONE-5 (LWSS Ghoran Small) 20 MM dia ( Light class)

ZONE-5 (LWSS Ghoran Small) 25 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 40 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 50 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 65 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 80 mm dia (Light Class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 15 MM dia ( Light class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 32 mm dia (Light Class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 50 mm dia (Light Class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 80 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 15 MM dia ( Light class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 32 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 40 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 65 mm dia (Light Class)

ZONE-8 (LWSS Charoor Bhadroot) 15 MM dia ( Light class)

ZONE-8 (LWSS Charoor Bhadroot)20 MM dia ( Light class)

ZONE-8 (LWSS Charoor Bhadroot) 25 mm dia (Light Class)

ZONE-8 (LWSS Charoor Bhadroot) 32 mm dia (Light Class)

ZONE-8 (LWSS Charoor Bhadroot) 40 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 15 MM dia ( Light class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 25 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 32 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 50 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 65 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 15 MM dia ( Light class)

ZONE-10 (LWSS Gangath ) 25 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 40 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 65 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 80 mm dia (Light Class)

ZONE-11 (LWSS Bali Kyori ) 15 MM dia ( Light class)

ZONE-11 (LWSS Bali Kyori ) 32 mm dia (Light Class)

ZONE-11 (LWSS Bali Kyori ) 40 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 15 MM dia ( Light class)

ZONE-12 (LWSS Attara ) 32 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 40 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 50 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 80 mm dia (Light Class)

ZONE-13 (LWSS Gangath Rapper ) 15 MM dia ( Light class)

ZONE-13 (LWSS Gangath Rapper ) 25 mm dia (Light Class)

ZONE-13 (LWSS Gangath Rapper ) 32 mm dia (Light Class)

ZONE-13 (LWSS Gangath Rapper ) 40 mm dia (Light Class)

ZONE-13 (LWSS Gangath Rapper ) 50 mm dia (Light Class)

ZONE-14 (LWSS Badial and kuriyali) 15 MM dia ( Light class)

ZONE-14 (LWSS Badial and kuriyali) 20 MM dia ( Light class)

ZONE-14 (LWSS Badial and kuriyali) 32 mm dia (Light Class)

ZONE-14 (LWSS Badial and kuriyali) 40 mm dia (Light Class)

ZONE-14 (LWSS Badial and kuriyali) 50 mm dia (Light Class)

ZONE-15 (LWSS Manwal Nanglian ) 15 MM dia ( Light class)

ZONE-15 (LWSS Manwal Nanglian ) 25 mm dia (Light Class)

ZONE-15 (LWSS Manwal Nanglian ) 32 mm dia (Light Class)

ZONE-15 (LWSS Manwal Nanglian ) 50 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 15 MM dia ( Light class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 20 MM dia ( Light class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 32 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 40 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 50 mm dia (Light Class)

Dismentalling and disjointing of GMS tube excluding the cost of earth work in trenches of following dia

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 32 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 40 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 50 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 32 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 50 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 32 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 40 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 32 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 40 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 32 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 40 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 50 mm dia (Light Class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 50 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 40 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd)50 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 32 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 40 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 50 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 50 mm dia (Light Class)

ZONE-15 (LWSS Manwal Nanglian ) 32 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 32 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 40 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 50 mm dia (Light Class)

Relaying ,jointing, testing of GMS Tube excluding the cost of earth work in trenches of following dia

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 32 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 40 mm dia (Light Class)

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist) 50 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 32 mm dia (Light Class)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd) 50 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 32 mm dia (Light Class)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd) 40 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 32 mm dia (Light Class)

ZONE-4 (LWSS DPF Lodhwan) 40 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 32 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 40 mm dia (Light Class)

ZONE-5 (LWSS Ghoran Small) 50 mm dia (Light Class)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru) 50 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 40 mm dia (Light Class)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd) 50 mm dia (Light Class)

ZONE-9 (LWSS Baniana Manwal Nanglian) 32 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 40 mm dia (Light Class)

ZONE-10 (LWSS Gangath ) 50 mm dia (Light Class)

ZONE-12 (LWSS Attara ) 65 mm dia (Light Class)

ZONE-15 (LWSS Manwal Nanglian ) 32 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 32 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 40 mm dia (Light Class)

ZONE-16 (LWSS Makroli Chatter Phase-IInd ) 50 mm dia (Light Class)

Provision of functional house tap connection including the cost of GI fitting and connection with GI pipe 15mm dia included union, Tee, Nipple, Brass, Tap (330 gm0 connection from distribution line welded with 1/4 inch long GI Nipple included with all leads and lifts complete in all respect and as per the direction of enginner in charge. Excavation to be paid in boq in items 18

ZONE-1 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-Ist)

ZONE-2 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IInd)

ZONE-3 (LWSS Baleer ,Dainkwan and Gujjar Nallah Phase-IIIrd)

ZONE-4 (LWSS DPF Lodhwan)

ZONE-5 (LWSS Ghoran Small)

ZONE-6 (LWSS Lakhanpur (Mehkar Theru)

ZONE-7 (LWSS Mangwal pHase- Ist and IInd)

ZONE-8 (LWSS Charoor Bhadroot)

ZONE-9 (LWSS Baniana Manwal Nanglian)

ZONE-10 (LWSS Gangath )

ZONE-11 (LWSS Bali Kyori )

ZONE-12 (LWSS Attara )

ZONE-13 (LWSS Gangath Rapper )

ZONE-14 (LWSS Badial and kuriyali)

ZONE-15 (LWSS Manwal Nanglian )

ZONE-16 (LWSS Makroli Chatter Phase-IInd )

National India Construction Co.

Unipro Techno Infrastructure Pvt Ltd