SPECIAL REPAIRS TO BLDG. NO. P-159B (DINING HALL AND COOK HOUSE) AT INS KALINGA AND ADDITION AND ALTERATION TO SEA SURVIVAL TRAINING FACILITY AT INS KARNA UNDER GE (P) NAVY KALINGA VISAKHAPATNAM

Amount

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as directed by Eng-in charge.

Taking down plastering on brick or stone wall,etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Dismantling carefully floor hearth or wall tilling including cement mortar bedding (but not backing) without damage to existing structure/ swimming pool removing the debris up to a distance of 3 Km,or beyond the school premises all as directed by Eng-in-charge. Note: Any damage to the swimming pool area and existing structure shall be rectified by the contractor at his own cost including grouting if any required as directed by Eng-in-charge.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down PVC Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

M & L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc., in apron complete all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside Stiles and Rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading and the panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

S & F Solid PVC Door Frame of size 100mm x 60mm made out of 5mm WOOD GRAIN printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

M&L for Anti skid ceramic tiles (of size 240 mm X 115 mm / 244 mmX 119 mm and 20 mm thick) with Finger Grip, safety marking, Grooving on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for laying floor finishes including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. Make -Kajaria Ceramic Ltd /Asian Granito India Ltd / H & R Johnson India Ltd (Endura) /Nitco or equivalent as approved by GE.

M&L Glass mosaic tiles of size 20mmx 20mm x 4mm thick in swimming pool area on floors, vertical surfaces such as dados, etc set and jointed with and including tile adhesive and tile grout jointing to match as per manufacturers instructions, and directed by Eng-in-charge. Make: Model 122-V1 and 130V3 (combination offlight and dark blue colour) of make Palladio or equivalent model in Pino/ Accura/ Italia as approved by GE

M&L for providing joint free non skid coloured ceramic tiles 600 x 600 x 7 to 8 mm thick in Skirting/Vertical Surface and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10 mm thk in CM1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed by the Engineer-in-charge.

M & L for Non skid/matt finish ceramic tiles 7 to 8 mm thick of size exc 0.11sqm but not exc 0.18sqm, in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over Screed bed or bedding layer of mortar 15mm of thick in CM 1:4 for laying floor finishes

M&L glazed ceramic coloured tiles 300 x 450 x 6-7 mm thick as in vertical surface set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering in CM 1:4 all as specified &directed.

S & F 125 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed

S & F of 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F Aluminium handles, cast type, anodised of size 150 mm

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs, vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, low level flushing cistern 10 ltr capacity and flush pipe and seat cover etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Tubular towel rail, 20mm dia, Brass Chromium plated , 20mm dia., 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs soap dish, chromium plated brass, of approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.

S&F 40mm dia. PVC waste pipes for WHB/sink fixed to walls including fittings and connecting to multiple floor trap complete all as specified and as directed by the Engineer-in-Charge.

Taking down PVC (SWR) pipes (of any radius) including joints etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm dia. single docketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) bends any radius provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) bends any radius provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) junction single (Single T) equal or unequal provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs, PVC (SWR) vent cowls 110mm dia. complete all as specified and as directed by the Engineer-in-Charge.

S&F ii repairs , PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs, grating doom 125mm dia. with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs Bib taps 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repairs two way bib cock, CP, Fancy type - 15mm dia complete all as specified and as directed.

S & F in repairs 15mm bore dia Pillar taps Fancy type, chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repairs 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F in repair Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look

S & F fixing in repair stainless steel pipe 25mm dia Curtain rod for Windows, doors opening etc

S & F in repair Fancy type CP Knobs for fixing curtain rod all as directed and specified

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection , pavement surface finished even and smooth without using extra cement complete all as specified and directed.

M&L 100 mm Cast iron Nahani trap grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.

Taking down existing Roof water proofing treatment /Cement plaster from roof

M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L for Plain Cement concrete 40mm thick type B-1, 1:2:4 (20mm graded aggregate) as in roof padding

M/L for rendering cement plaster 15 mm thick on fair faces wall in CM 1:4 finished even and smooth without using extra cement.

M&L for 10 mm thick rendering on Internal plaster of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed finished even and smooth without using extra cement.

M/L for rendering cement plaster 5 mm thick on fair faces of ceiling in CM 1:3 finished fair and even without using extra cement.

M & L for preparation of new surface of walls and applying two coats of Exterior emulsion over a coat of primer for external surface on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L Preparation of new plastered wall surfaces and applying two coats of plastic emulsion paint over priming paint including applying 3mm thick wall care putty .

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge.

Dismantling water tanks capacity exc250 but not exc 500 Ltrs and removing to store

S & F 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

Taking down Rolling shutter of any description and of any thickness

S&F Steel rolling shutter lath thickness 1.00mm,without ball bearing ,as specified including top cover ,anchoring rod, hasp and staple and one shop coat of primer ,erected in position as indicated ,complete ,gear operated with bevel gear box and crank handle.

Supply only mild steel medium grade shaft pipe of 50 mm dia as required for rolling shutter complete all as directed by Engineer-in-Charge.

Supply only guide channel, made out of MS sheet 3.15 mm thick and 75 mm wide, complete all as directed by Engineer-in-Charge.

S&F safety lever lock mild steel with 4 levers for rolling shutters

S&F Ball bearing or rolling shutters

S&F Steel (white powder coated) crescent lock for UPVC sliding window/door with necessary screws etc complete all as specified and as directed.

S&F UPVC window,(unplastisized poly-Vinyl Chloride) sliding windows multi-chambered and stiffened framed windows using 88mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick clear float glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both the frames and the shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minimum weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed. Make : Rajshri Plastiwood/Veka/Sintex/Duroplast Extrusion Pvt. Ltd

Demolition of brickwork or stone boulder masonry built in cement mortar in portions

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius with built in CM 1:6

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4

M/L for Mild Steel TMT bars of 8mm dia and cut to length bent to shape required incl cranking ,bending and binding with and incl mild steel wire annealed not less than 0.9mm dia complete

M & L for providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in Shelves ,landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

S&F Stainless steel handrails, fabricated to required design, using 304L stainless steel pipe of 50mm dia welded to 25mm dia stainless steel pipe balusters @ 300mm centre to centre and fittings, including welding and polishing and fixed with necessary stainless steel plates, flanges, canopies, screws etc, complete all as specified and as directed.

Treatment of soil under existing floor using emulsion @1litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1cement:2 coarse sand) to match the existing floors.

Taking up or down 15 mm bore steel tubing and connections complete

Taking up or down 20 mm bore steel tubing and connections complete

Taking up or down 25 mm bore steel tubing and connections complete

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good , cutting not exc 10 cm girth

S&F of outer dia 16mm dia 3 Layer PP-R pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & colt water supply incl all PP-R plain & brass threaded fittings complete all as specified and as directed.

S&F of outer dia 20mm dia 3 Layer PP-R pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & colt water supply incl all PP-R plain & brass threaded fittings complete all as specified and as directed.

S&F of outer dia 25mm dia 3 Layer PP-R pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & colt water supply incl all PP-R plain & brass threaded fittings complete all as specified and as directed.

Taking down rain water/soil waste/vent pipes including all fittings any size and pattern.

S & F 75 mm bore PVC (SWR) , waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

M&L for Fiber lined special wood, anti skid diving board of size 4.8 m length, 0.50 m width and thickness not less than 40 mm including fixing arrangements , accessories, etc complete all as directed by Eng-in-charge. Make – Astral / Aquamatix/Kripsol or equivalent as approved by GE Note :- The Diving board is to be fixed in existing RCC platform, the bidder should be aware of the required accessories as per manufacturer instructions and it is deemed to be included in quoted rates.

M&L for packing of down take pipe of dia 150 to 200mm. The pipe to be fixed should be filed in order to provide a proper bond and the same to be aligned. The annular space around the rain water pipe shall be packed using Conbextra GP2 (or equivalent), a high strength free flow non shrink grout mixed water in ratio 0.16. The surface shall be suitably prepared using wire brush, primed with Nitobond SBR (or equivalent) on the core surface fixing leak free form work complete all as per manufacturer’s instructions by approved applicator and as directed by GE. Make : FOSROC/SIKKA/BASF or equivalent as approved by GE.

M&L Pressure grouting at leaking points providing cementitious based injection grouting at construction joints spots and honey combs with 40 psi pump using Cebex 100 @ 225 gms or approved equivalent mixed to 50 Kg bag of cement including joints packing using polymer modified mortar .Fixing of nozzles and chipped portions of nozzles shall be reinstated using Renderoc Plug or approved equivalent complete all as per manufacturers instructions and as directed by GE. Make : M/s FOSROC/M/s SIKKA/ M/s BASF or equivalent as approved by GE

M&L Coving at right angle junctions: All the right angle junctions between floor and wall shall be provided with coving of size 75mm x 75mm minimum 15mm thickness in cement mortar 1:4 admixed with Nitobond SBR or approved equivalent @ 2 litres per 50 kg bag of cement after saturating the surface with water and applying a slurry primer coat with Nitobond SBR complete all as per manufacturers instructions and as directed by GE. Make : M/s FOSROC/M/s SIKKA/ M/s BASF or equivalent as approved by GE

M&L for Surface preparation, Cleaning and preparation of the substrate including grinding to which the waterproofing barrier applied must be carried out thoroughly to leave a sound base for the application. Any laitance present on the surface must be removed mechanically. Release oil and other contaminants which may impair adhesion must be removed prior to the application. Surface shall be maintained in dry condition before applying waterproof coating. This rate includes water pond test (Pre & Post WP treatment). Any minor patch repairs to be done by structural grade repair mortar Renderoc S2 or equivalent complete all as per manufacturer instructions and as directed by GE. Make :FOSROC/SIKKA/BASF or equivalent as approved by GE.

S & F in repairs Brass chromium plated shower rose 125mm size

M&L PCC (1:2:4) Type B2 in foundation, filling and mass concrete

Use and waste of form work to sides of concrete foundations or similar works, vertical or to batter.

Dismantling Plastic grating of any description and removing to store

Supply, installation , testing & commissioning Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architectural requirement suitable for waste and FT or approved equivalent complete all as per manufacturers instructions and as directed by GE. a) Size 100 mm x 100 mm , Make - Chilly( CCTL - SMHC-150 )/GMGR

M & L for Plain Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) as in roof padding

M & L screed bed 10mm thick on roof surface in cement mortar 1:3 finished even and smooth without using extra cement including mixing of WPC (WPC will be measured and paid separately) complete all as specified and as directed.

Supply only Integral Water Proofing Compound (ISI marked) of approved make.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application an applying one coat of bituminous aluminium paint complete all as specified and directed.

M&L Second class hard wood Plain solid straight chowkhats and frames, wrought ,framed, rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, supplied and fixed.

S&F factory made shutters 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S & F of 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F 4.80mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

M&L for complete removal of existing treatment on walls and applying two coats of Weather Proof Paint complete all as specified and as directed.

M&L Complete removal of existing treatment on wall and applying two coats of plastic emulsion paint over priming paint complete all as specified and as directed.

M & L for preparation of old surfaces and applying three coats of white wash on Ceiling

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15 mm thick cement screeding in CM (1:4) including rubbing and polishing complete

Surface Excavation n.exc 30 cm deep and avg 15 cm deep and getting out in Soft/loose soil

Removing excavated soil not exc. 50 m and depositing where directed where directed at a level n exc. 1.5 m above the starting point

M & L for Boulder Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface all as specified and as directed.

M & L for 100 mm thick Plain Cement concrete of type D2, 1:4:8 (40 mm graded aggregate) in subbase complete all as specified and as directed by the Engineer-in-Charge.

M & L for 50 mm thick Plain Cement concrete of type B1, 1:2:4 (20 mm graded aggregate) in above sub base complete all as specified and as directed by the Engineer-in-Charge.

Forming 20 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in 100 mm thick concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L for Plain Cement concrete 25mm thick type B-0, 1:2:4 (12.50mm graded aggregate) in sub base

M&L for providing joint free non skid coloured ceramic tiles 600 x 600 x 7 to 8 mm thick floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screeding in CM (1:6) all as specified

S & F 2000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

S&F 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 15mm dia. chromium plated with long shank and cup stop valves (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

M&L 2mm thick for providing Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting is sealed down with an approved adhesive complete all as specified and as directed by the Engineer in charge.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated for mounting modular switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 125 here-in-before but for one fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 125 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 125 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 125 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 1.5 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 1.5 sqmm as in continuous earth wire drawn into and Existing/ New , concealed/surface PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete with taking down old unserviceable submain wiring and including cutting chases pinning and making good disturbed surface complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends with taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends with taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and as directed.

Material and labour for sub main wiring with four single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 6 sq mm size and drawing into and including concealed PVC conduit 25 mm dia ISI marked with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 2 x 6 sqmm, single core, as earth continuity wire with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends with taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and as directed. all as specified and as directed.

Supply and fixing modular plate switch flush type, single pole one way 6 Amps 250 volts

Fixing only switch flush button single pole one way 5 amp all as specified and as directed. (Material obtained from item No 124 here in before shall be used)

Supply and fixing switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

Supply and fixing modular plate switch flush type, single pole one way16 Amps 250 volts

Supply and fixing modular socket 6 Amps 5 pin all as specified and as directed.

Fixing only switch socket outlet 5 amp flush type all as specified and as directed. (Material obtained from item No 124 here in before shall be used)

Supply and fixing modular socket 6-16 amps 2/3 pin combined shuttered all as specified and as directed.

Supply and fixing modular step fan speed regulator 120 w ,2 module all as specified and as directed.

Supply and fixing modular plates white colour suitable for flush metal boxes for mounting modular switches or sockets etc for 8 modules.

All as per item No. 142 here-in-before but for 6 modules all as specified and as directed.

All as per item No. 142 here-in-before but for 3 modules all as specified and as directed.

All as per item No. 142 here-in-before but for 2 modules all as specified and as directed.

Supply and fixing Flush metal box 1/2 module all as specified and as directed.

All as per item No. 146 above but for 6 modules all as specified and as directed.

All as per item No. 146 above but for 3 modules all as specified and as directed.

All as per item No. 146 above but for 8 modules all as specified and as directed.

Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed.

Fixing only ceiling rose surface bakelite three terminals all as specified and as directed. (Material obtained from item No 124 here in before shall be used)

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts,incl taking down old unserviceable one all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with dim rail earth and neutral bar ,incl taking down old unserviceable one all as specified and as directed.

Supply and fixing in proper position MCCB four pole of capacity 100 amps, 415 Volts 25kA breaking capacity incl taking down old unserviceable one all as specified and as directed.

Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Supply and fixing of single pole and neutral enclosure of 20Amps, 240Volt with a two pin and earth plug and socket complete with one double pole MCB directed by Engr-in-charge.

Supply and fixing of three pole and Earth enclosure of 32 Amps, 440 Volt with a three pin and earth plug and socket complete with one triple pole MCB directed by Engr-in-charge.

Supply and fixing indoor luminaire decorative batten for wall/ ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. Make:CGCat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent as approved by GE

S&F Recess Mounting luminaries LED downlighter of 12 W white in the shape of Square complete , all as specified and as directed.

Supply and fixing indoor luminaire decorative batten for ceiling mounting suspended type energy efficient saving LED LIGHT 40W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply and fixing LED mirror light fittings 07 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection all as specified and as directed.

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan.

Supply only fan condenser upto 2.5 mfd

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

Supply only mounting clamp assembly complete for ceiling fan 1200mm/1400mm sweep with amp,bolt,nut,washers, safety/ split pins and rubber bush and all as specified and as directed.

Supply only down rod assembly complete for ceiling fan 1200mm/ 1400mm sweep all as specified and as directed.

Supply and fixing Ceiling fan of 1200 mm sweep BLDC 32 W decorative blades metallic white energy efficient saving) with incl Fan regulator clamp and hook at proper position , fan regulator, necessary accessories etc,taking out old unserviceable kept deposit in MES store yard all as specified and as directed.

S&F Exhaust fan wall mount type 300 mm sweep metal body Heavy duty , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Supply and fixing in replacement louvers shutters for Exhaust fan of any size up to 450 mm sweep suitable for any make made of MS sheet including two coat of synthetic enamel paint over a coat of red oxide and bolt,nut,washers etc complete including taking down old unserviceable one all as directed by Engineer-in-Charge.

Supply only cord flexible copper conductor three core 23/0.0076 Sqmm PVC insulated sheathed 1100 V grade complete all as specified and as directed by the Engineer-in-Charge.

Taking down solar water heater of capacity 500/200 ltrs in existing position after disconnecting the water pipe line, water tank shifted/lifted to other place . and re-assembling the water tank, solar water heater flat collector complete testing and refixing the other position, including all connection . labour cost & transportation for replacing are deemed to be inclusive in the quoted rate. solar water heater comprising of the following :- (a) Inspection, taking down , opening or dismantling, de-scaling, brushing and thoroughly cleaning the storage tank up to the satisfaction of the Engineer-in-charge. (b) checking of all stop cock, solar water tab, pressure release valves, serviceability etc. (b) Checking, and re-fixing solar Flat Plate collector/ tube collector, water tank ,water tank stand painted , and re-adjust. (c) Re-assembling the solar water tank ,solar water tube collector/ flat plate collector, re-install and testing complete. d) Any accessories not covered in the BOQ but required for completion of Job. Note : Parts / components of solar water heater found unserviceable shall be replaced by the contractor, labour charges required for replacement are deemed to be included in the quoted .

M&L for Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2 mtrs length buried directly and preferably vertically in ground with top flanged ended 0.5mtrs below ground label welded/connected with GI strip 32×6mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete

SAI SAMPATH ELECTRICAL AND ENGINEERING

SRI RAJA RAJESWARI ENTERPRISES

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS