Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.7 LAccepted-AOC | 1 | Accepted-AOC Being the lowest bidder | |
| 2 | 2₹23.0 L+₹29,576 (1.30%)Rejected-AOC | 2 | Rejected-AOC Being other than the lowest bidder | |
| 3 | 3₹24.0 L+₹1.3 L (5.77%)Rejected-AOC | 3 | Rejected-AOC Being other than the lowest bidder | |
| 4 | 4₹25.6 L+₹2.8 L (12.5%)Rejected-AOC | 4 | Rejected-AOC Being other than the lowest bidder | |
| 5 | 5₹25.7 L+₹3.0 L (13.4%)Rejected-AOC | 5 | Rejected-AOC Being other than the lowest bidder |
Tender Value
₹36.5 L
EMD Value
₹73,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CA NO. CWE BLY / GE(E) / 61 OF 2022-23 SPECIAL REPAIR TO BLDG NO. T-18 OTM ACCN MTN DIV PRO UNIT UNDER GE (E) BAREILLY
2022_MES_562265_1
8200/B/741/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D Category a(i) For Unenlisted Contractor - Meeting enlistment criteria of MES with regard to having satisfactory completed requisite value of work, Annual turnover, working capital , etc as mentioned in NIT.
6 documents required · 6 mandatory
₹500
GE ( E ) Bareilly
₹73,000
Yes
28 Dec 2022
12 Nov 2022
12 Dec 2022
12 Nov 2022
5 Dec 2022
28 Nov 2022
Amount
Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed
Demolition/dismantling of RCC beam , chajja , shelve and similar suspended work complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.50 sqm each complete all as specified and directed.
Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Dismantling water tanks exceeding 500 capacity & n exc 1000 and removing to store of all retrieved material complete all as specified and directed.
S&F steel work in tubular for rafter purlins etc , including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.
M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.
S&F welded steel wire fabric weight n. exc. 4kg/sqm to wood or steel members complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Pre-painted galvalume curved aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.
M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, build in cement mortar 1:6 complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, wall band,shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in concrete wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified.
M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels & wall band over 1.5m span etc complete all as specified and directed.
M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (f) Making good of wall surface to match with existing surface complete.
S & FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all specified and directed.
S&F Powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S&F Powder coated aluminium ventilators box type,Sliding glass pan with wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Sliding Glass arrangment with neceassry rquired fittings/handle . (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and complte all as specified and as directed.
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
M & L 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L for non skid ceramic tiles 7 to 8 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed
M&L for non skid ceramic tiles 7 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.
M & L 7 to 8 mm mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , each tile size 300x600 mm as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L 18-20 mm thick granite of black colour (table rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.
M&L Machine cut pre- polished kota stone slab flooring 20-22 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete complete all as specified and directed
M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L for vitrified ceramic exterior heavy duty out door coloured tiles 12 mm thick (Square/rectangular) polished area of each tile size not exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as spd as directed
S&F vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.
S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.
S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .
S&F fancy type brass chromium plated toilet paper holder, complete all as specified.Make Jaguar or equivalent
S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.
S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.
S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified
S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.
S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .
S & F fancy type 150mm size square brass CP shower rose all as specified.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repair vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including seat cover , connection to drain or out going pipe and flush pipe anti symphonize pipes etc including making good to floor complete all as specified and directed
S&F PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.
S & F 15 mm dia CP health faucet with 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed .
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified Complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed. .
M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropirate grit to make surface clean,free from dust ,loose paint etc by skilled labour and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer .
M&L for preparation of newly plastered walls surfaces and applying two coats of cement base paint on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer .
M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed.
M & L for preparation of new steel surface of any description over 10 cm width or girth , not other described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for BER Board or rehanging etc after some minor repair complete all as specified and directed.
Taking dowm submainwiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
M & L for point wiring for modular fittings with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drawn through and including non metallic rigid PVC concealed conduit with all accessories and 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) as continuity earth wire connected to common earth dolly and with metal flush box for mounting of modular fittings and cover plate( Metal box, inner & outer cover plate etc shall be measured and paid separately under respective items) incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/exhaust fan/bell point controlled by one modular switch/bell push complete all as specified and directed.
All as per item No 83 above but one 3 pin modular socket oultel 5 Amp on the same board with other switch complete all as specified and directed.
All as per item No 83 above but one 3 pin Modular socket outlet 5 Amp independent complete all as specified and directed.
All as per item No 83 above but for one light point controlled by two, 2-way 5Amps Modular switch complete all as specified and directed.
All as per item No 83 above but one 3 pin Modular socket outlet 16 Amps independent with 2.5 Sqmm PVC insulated sheathed cable and 2.5Sqmm cable for earth wire complete all as specified and directed.
S&F Modular switch piano flush type single pole one way 5 Amps complete all as specified and directed.
S&Fmodular switch piano flush type single pole two way 5 Amp. complete all as specified and directed.
S&F Modular Switch Piano flush type single pole one way 15 Amps.complete all as specified and directed.
S&F Modular Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
S&F Modular socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F ceiling rose, 3 terminals, PVC polycarbonate isolated body complete all as specified and directed..
S & F Lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 Volts,7/9 Watt complete all as specified and directed..
S & F LED Tube light fittings1x 20 Watt ( T-8 ), 4' long, 220 Volts, AC decorative box type with driver,holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F LED Tube light fittings1x 10 Watt ( T-8 ), 2' long, Mirror type, 220 Volts, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser,heat sink integrated including one no. 9Watt LED lamp complete all as specified and directed.
S &F LED building security light fitting 25 Watt,230 Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete all as specified and directed.
S & F LED Wall bracket type CITY-2 fitting 9 Watt complete all as specified and directed.
S&F in repairs stepped, (socket/switch type) electronic Modular fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specified and directed.
S &F in repairs Recess mounting type LED ultra slim Ceiling light 2'X2', 35/36 Watt complete all as specified and directed.
S&F in repairs round shape 8 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed.
Hanging only ceiling fan after cleaning & making functional by replacemnt of capacitor, rubber reel,pin nuts bolts, canpoy rod, loose connection etc. and rewinding painting and remarking the serial MES fan Nos etc complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in colour 1.0 sqmm cable complete all as specified and directed.
Fixing only Exhaust fan, cleaning all dust etc from surfaces of any size painting, repair, rewinding and remarking the serial MES fan nos etc complete including electric connection and replacement ceiling fan complete all as specified and directed.
M & L in replacement for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
S&F in replacement sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in replacement MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
S&F in replacement MCB SP 6A-40A, 230V. 10KA. B' curve type complete all as specified and directed.
S & F in replacement GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete.
Taking down service connection/UG cable removing of site complete all as specified and directed.
Excacvation in trenches not exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of electric cable or water pipe etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm in soft/loose complete as all specified and directed.
Removing excavated materail n exc 50m and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
Supply & laying sub class B bricks, well burnt , laid wirdth wise along the length of cable laid in trench over sand cushion laid for cable protection, complete all as specified and directed.
Material and labour for river washed and screned, dry sand for filling in trench below and around the under ground cable for cushioning of cable etc, complete all as specified and directed.
Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 40mm bore GI pipe for crossing the cable and making good both the ends all as specified and directed. Note :- GI light grade pipe shall be measured and paid separately under respective item.
Supply & fix tube 40mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor complete all as specified and directed.
Supply and lay cable XLPE insulated PVC armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 25 Sq mm 4 Core complete all as specified and directed.
S&F sheet metal enclousers (DBS) when MCBs to be used 4way double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F MCB s three phase & neutral of size 100 Amp, 230V, 10KA, B curve type complete all as specified and directed.
S&F MCB single pole of size 63 Amp 230 volt Curve type complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work including testing complete all as specified and as directed. Note : Tenderers may note that amount of credit Rs 65,645.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
M/S ABHISHEK ENTERPRISES
M/S Quality Constructions
Vasundhra Enterprises
M/S R S Constructions
R K CONSTRUCTION
S S CONSTRUCTION CO
Mohit Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .