Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC 32 LOOTERY MOHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 W B | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹21.0 L+₹60,622.80 (2.97%)Rejected-Finance | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹21.4 L+₹1.0 L (4.94%)Rejected-Finance | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹21.7 L+₹1.3 L (6.27%)Rejected-Finance MANNAPARA MONIRAMPUR P O P S BARRACKPORE DIST 24 PARGANAS N KOLKATA 743101 WB | 743101 | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹22.2 L+₹1.8 L (8.98%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹18.5 L
EMD Value
₹37,000
Closing Date
26 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
PROVISION OF GARAGE AT AF STATION JAFFARPORE UNDER GE (AF) BARRACKPORE
2024_MES_648234_2
8511/BKP/AF OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-E,
Category-a(i)
2 documents required · 2 mandatory
₹0
₹37,000
Yes
31 Aug 2024
12 Jun 2024
28 Jun 2024
12 Jun 2024
26 Jun 2024
19 Jun 2024
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches n.exc. 1.5m wide and n.exc1.5m depth for foudation, laying of under ground cable, laying of pipe line etc. and getting out in soft/loose soil complete all as specified and directed.
All as per item No. 2.00 depth exc 1.5m but n. exc 3.00m and -ditto-
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point as in soft/loose soil complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Materials and labour for 75mm thick soling (or sub base) of well burnt soling bricks including filling of interstices and rolling complete all as specified and directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor / pavings and finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams,lintels etc. complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. complete all as specified and directed.
Material and labour for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using liquid water proofing coumpound (WPC) @ 200ml/50Kg bag or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.
Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed.
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection and finish the concrete surface even and smooth without using extra cement including forming costruction joints and filled with sealing compound type A complete all as specified and directed.
Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor / pavings and finished the surface even and smooth without using extra cement complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.
Form work to sides of pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular or polygonal surface of concrete complete all as specified and directed.
Form work to sides and soffits of floor or roof beams, slab, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed.
Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 27.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and .-ditto-.
Material and labour for 15mm thick rendering in cement mortar (1:3) mixed with water proofing compound @3% or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane and complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.
Supply only integral water proofing compound (WPC) complete all as specified and directed
Material and labour for water proofing treatment to RCC roof surface comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer @ 0.30 liters per sqm confirming to IS 3384 over plastered surfaces of roof. (b) One layer of APP based polymeric membrane 3mm thick, weight not less than 3.50 kgs per sqm, reinforced with non woven polyester matt central core fabric (weight not less than 160 GSM) and coated on both side with and including layer of APP modified bitumen and finished with and including micro-prefabricated heat fusible polythene film on both surfaces. (c) Finally applying two coats of aluminum paint @ 0.10 ltrs per sqm per coat on top surface. Contd...
Note:- (i) The work shall be executed only through authorised applicator of manufacturer as approved by GE. (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 150mm and 100mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions. Make of APP membrane:- Super Thermolay of M/s STP Ltd, Hyperplas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Danosa (India) pvt ltd, , M/s FOSROC Chemicals, Smartcare APP membranes of M/s Asian Paints Ltd.
Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder pannel board (CPRI Approved), outdoor type, double door, factory made out of 3.15 mm thick CRCA sheet of size 1.5 m x 1.00 m x 0.5 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 nos legs 0.5 meter length with cable entry and exit circular hole with cable gland and gasket at bottom complete including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc including necessary excavation work for taking out cable loop, foundation of panel board and refilling and comprising of the following accessories:- (a) Anodized Copper bus bar of capacity 200 Amp -04 Nos (b) MCCB 63 Amp fixed thermal and magnetic release type, 415 Volts 4 pole, 36 KA - 01 Nos ( In coming). (c) MCCB 32 Amp fixed thermal and magnetic release type, 415 Volts 4 pole, 16 KA - 01 Nos (Out going). (d) Indicator lamp LED type (set of three Red,Yellow,Blue)- 1 Nos.
Material and labour for sand cushioning with clean and dry river sand for protection of UG cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and directed. Note:- Punned down thickness shall be measured for payment.
Materials and labour for brick protection cover to underground cables with sub class ‘B’ of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 10 Sqmm, 2 core, 1100 Volts (earthed) grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
Materials and labour for boring of holes under road/ runway/pavement/ hardstanding etc. with trenchless technology using ultra sounding technique for passing HDPE pipe 75 mm bore complete all as specified and directed. Note-Necessary infrastructure required for boring shall by arranged by the contractor and cost of the same included in quoted rates.
Supply and fix 75mm bore HDPE pipe pipe of pressure rating 6 kgf/cm2 with all fittings for protection of cables to cross under road, hard standing, pavement etc complete all as specified and as directed.
Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including modular flush metal boxes with inner and outer modular cover plates for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dully complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for Each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and MS terminal box.
All as per item No. 38.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.
All as per item No. 38.00 here-in-before but for one five pins 5 Amps switch socket outlet point on same board and -ditto-.
All as per item No. 38.00 here-in-before but for 15 amps socket outlet with 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dully and -ditto-.
Supply and fix modular switch 1 way 6 amps, 1 module complete all as specified and directed
Supply and fix modular switch 1 way 16 amps, 1 module complete all as specified and directed.
Supply and fix modular shuttered sockets 6 amps, 3/5 pin combined two module complete all as specified and directed.
Supply and fix modular shuttered sockets 6/16 amps, 3/5 pin combined two module complete all as specified and directed.
Supply and fix ceiling rose, 3 terminals, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed.
Supply and fix LED lights fittings with extruded aluminium housing, high quality PC diffuser, efficacy- 125lm/W, 20 watt, 4 feet long, 220V, AC, 3000K, CRI ≥80, integrated design including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Crompton /Wipro / Philips/ GE.
Supply and fix sheet metal enclouser SPN DB 8 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with 200 Amp rated bus bars, neutral links, blanking plates complete all as specified and directed.
Supply and fix MCB SPN, 240 Volts, of 40 to 63 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.
Supply and fix cable junction box 130 x 180 x 77 mm in size, with knockout for cable entry for 4-10sqmm cable size, made out of thermoplastic sheet having IP-66 protection with terminals for outdoor installation on poles by MS clamp of suitable sizes complete all as specified and directed.
KAZI ENTERPRISE
VISHAL ENTERPRISE
BANERJEE CONSTRUCTION
R K CONSTRUCTION
KAMAL ENGINEERING
PIONEER
KUMAR ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .