Repair to drain, sewage chamber grease trap, compound wall Drain/Manhole cover and misc connected B/R work in the AOR of AGE B/R-II GE (AF) No. 2 Jodhpur

Cleaning of septic tank and soak pit of any capacity & any size by taking out sludge and sludge loading to the cart/ lorry & depositing out side MD land including bailing out foul water by manually or by any mechanical means in tanker and dispose the waste water out side MD land and all as specified and directed by Engr-in-Charge. Note:- (i) Rate quoted includes bailing out water from septic tank upto 2/3 depth of tanks and removing sludge. (ii) The measurements for sludge upto depth of 1/3 of septic tank shall only be recorded for payment purpose.

Removing blockage of soil/waste/PVC pipe of any dia and cleaning the lines in between followings with water all as directed by the Engineer-in-Charge :- (Note :- Rate quoted for item No 2 .01 and 2.02 deemed to includes cleaning/ removing of blockage of first manhole and taking out slude from out side MD Land.

Floor/Nahani trap to Gully trap and upto first man-hole.

WC to first manhole

Cleaning of 100 mm bore SGSW/DWC/any type of pipe lines in between two consecutive manholes of any depth to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Cleaning of 150 mm bore SGSW/DWC/any type of pipe lines in between two consecutive manholes of any depth to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Cleaning of 200 mm bore SGSW/DWC/any type of pipe lines in between two consecutive manholes of any depth to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Cleaning of 250 mm bore SGSW/DWC/any type of pipe lines in between two consecutive manholes of any depth to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Note for item No 3,4,5,6 :- (i) Measurement for these items shall be recorded from inner face of walls between two consecutive manholes. (ii) If cleaning of sewage line is not feasible without removing sludge from the manhole. The sludge from the manholes shall be cleaned all as decided by the executive and shall be measured and paid separately under item No7,8 & 9 which is applicable. Note for item No 2,3 ,4,5,6,7,8&9 :- If any blockage removed by the contractor will reoccur due to negligence in workmanship by the worker within ten days of cleaning, the same shall be recleaned without any extra cost to the Govt.

Cleaning of manhole of any description, any size and depth including removing sludge and deposited outside MD land etc complete all as directed by Engineer-in- Charge.

Cleaning of SGSW/any types of pipe of 100/150/200/250/300 mm internal dia between two consecutive manhole depth upto 2.0 meter with sewer jet machine to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Cleaning of SGSW/any types pipe of 100/150/200/250/300 mm internal dia between two consecutive manhole depth exc 2.0 meter but n.exc 4.0 mete with sewer jet machine to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.

All as per item No 10 above but exc. 1.5 m but n.exc. 3.00 m in depth

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge

M&L for light coloured Vitrified Ceramic tiles 7-8 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 25.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for poviding and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not proving using chemical emulsion at theart of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC connections 15mm size with Brass nuts of length 600mm.

S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repairs PVC flush bend pipe for PVC 10 litre flushing cistern for EWC/IWC all as directed by Engineer-in-Charge.

S&F in repairs lid for polyethylele water storage tank exc. 500 litres and n. Exc 1000 litres including fixing PTMT nut/binding wire complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repairs brass chromium plated health faucet of 15 mm bore complete.

S&F in repairs 15 mm bore brass chromium plated two way bib cock two in one with angle cock including fixing to steel pipe or union.

Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finished and complete all as specified and directed by Engr-in-Charge.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm and complete all as specified and directed by Engr-in-Charge.

S&F ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed and complete all as specified and directed by Engr-in-Charge.

S & F structural steel rolled section in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; complete confirming to FE-290(Gde E-165) also fastening and fixing complete all as specified and directed

S&F in repairs stainless steel curatin rod , high strength MS pipe with powder coated extrusion having outer dia 28 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge.

S&F in repairs Stainless Steel cap for curtain rod for 28mm dia curtain rod as directed by Engineer-in-Charge.

S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

S&F in repairs box type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified & as diretced

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4

All as per item No 68 above but except stone

Extra for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling

M&L for rendering 15 mm thick in CM 1:4 with on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

Supply only integral water proofing compound ISI Marked

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc. any thickness, jointed in any mortar (broken stone patti manhole covers/ soakage pit roof slab ) .

M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10 cm thick, 25 cm to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete as in manhole cover and soak pit.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

S&F in repair 15mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for GI pipe and fixed complete all as specified and as directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for GI pipe and fixed complete all as specified and as directed.

S&F in repair 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for GI pipe and fixed complete all as specified and as directed.

S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge

S&F in repairs for sink mixer with regular spout w/m and complete all as directed by Engr-in-charge

S&F in repairs for wall mixer with bend, and complete all as directed by Engr-in-charge

S & F in repair, double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover groverning pivot made of brass, other parts to be mild steel , heavy duty complete all as specified and as directed.

S & F in repair, door closer hydraulically regulated designation No.3 universal type suitable for double shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body complete all as specified and as directed.

S&F in repair 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

S & F PVC waste pipe 32mm bore of suitable length for WHB/Urinsl/sink complete all as specified and as directed

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16"x12"6") white/ivory in colour.

S&F in repair corner shelf (set of three) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

Please Enable Macros to View BoQ information