SPECIAL REPAIR TO BUILDING NO KP-1 AT POWER HOUSE AREA UNDER AGE B/R-II at MIL STN YOL

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Taking down chowkats or frames with shutters n.exc 1.50sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shuttersexc 1.50sqm but n exc 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed.

Supply & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall with two corrugations side lap, fixed with self tapping screws including Dismantling of old Corrugated roof sheet complete all as specified and directed

Supply & fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ncluding Dismantling of old Plain roof sheet complete all as specified and directed.

S&F Clip-in false ceiling system with plain steel beveled edged tile (600mmx600mm) manufactured out of 0.70 mm GI sheet having power coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure postive engagement into the spring clip-in profile allowing for demounting of indivual tiles.The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip- in profile of size 38mm x 20mm and installed at 600 mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed form galvanized steel 'C' channels of size 10mm x 38mm x10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacture instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufactures instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20 mmx 30 mmx20mm and 0.5 mm thick with matching the color with tiles all as per manufacture specifications/instructions and including necessary scaffolding all as specifed and directed by Engr-in-charge and GE.