8220 PROVN OF MEDICAL TRAINING ROOM OF 306 FLD HOSPITAL, REV AND CERTAIN MINOR WORKS AT CERTAIN UNIT UNDER GE (E) BAREILLY.

Amount

M&L for excavation in trenches not exe 1.5 m width or depth and n exc 10 sq m on plan and n exc 1.5 m in depth getting out in any type of soil for foundation, laying cables etc., complete all as specified and directed.

M & L for surface excavation n exc 30cm deep and averaging 15cm deep and getting out as in any type of soil completed all as specified and directed.

Surface dressing n exc 15 cm deep complete all as specified and directed.

Returing filling in including spreating levelling, watering and well raming in layers not exe 25cm thick in any type of soil completed all as specified and directed.

Removing excavated materials not exc 50m and depositing where directed at a level not exceed ng 1.5m above the starting point in soft/loose soil completed all as specified and directed.

M &L PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation completed all as specified and directed.

M&L RCC 1:2:4, type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth beam complete all as specified and directed.

M&L RCC 1:2:4, type B-1 (Nominal Mix) (using 20mm graded stone aggregate) Columns, pillars, piers, Chajja, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B-1(Nominal Mix) (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs complete all as specified and directed.

M&L for reinforcement cement concrete RCC 1:2:4, type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in beams, lintel / roof beam etc completed all as specified and directed.

M&L for reinforcement cement concrete RCC 1:2:4, type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in Chajjas etc. completed all as specified and directed.

S&F Mild Steel 10 mm dia and over deformed TMT bars, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia completed all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders and all as specified and directed.

S&F form work to sides of concerte, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter complete all as specified and directed.

S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) completed all as specified and directed.

S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc. completed all as specified and directed.

S&F Form work to sides of the Column,pillars, posts, struts, piers and stanchions completed all as specified and directed.

S&F Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide completed all as specified and directed.

M&L pre construction anti termite treatment treating the bottom and sides of excavation, plinth protection and top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface area completed all as specified and directed.

M&L pre construction anti termite treatment treating the back fill incontact with foundation at the rate of 7.5 litres of chlorophyriphas emulsion per square metre vertical surface completed all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed

M&L Brick work with fly ash bricks having crushing strngth not less than 75kg/sqcm, straight or curved in half bricks wall built in cement mortar 1:4 complete all as specified.

M&L for Hard core of broken brick gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken brick, water and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed

M&L 40 mm thick PCC (1:2:4) type B1(20 mm graded aggregate) as in floor rough finished to receive top layer complete all as specified and directed

M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded aggregate) as in floor rough finished to receive top layer complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L 18 mm thick granite of black colour (table rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in repairs for machine pressesd pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone including weathering, slightly rounded or chemferred angles and throating complete all as specified.

M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking, handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass, off cuts complete with finishing wall in CM 1:4, designed approved by Engr-in Charge

S&F 12 mm thick toughned glass partion wall with or without powder coated aluminium frame with any type of eaching designed on tougned glass, off cuts complete as requirement of site with arrangement for suitable height with off cuts all as spd as directed

M&L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x38x1.48mm thick with rawl plug (b) Middle and lock rail : 85x44x1.48mm thick (c) Bottom rail : 114x44x1.48mm thick (d) Top rail/style : 114x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x35mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick,4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for office cabinet/ cupboard shelf or partition wall incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging, design as per site requirements basis, complete all neccessary fitting all as specified and directed

S&F for Pressed steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed. Note : Design and colour approved by GE.

S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed

S&F 18 mm thick imported wooden medium density fibreboard fixed with frame incl hold fast (as in shutter incl knob in each shutter) etc including magnet catcher built in cup board with all necessary fittings complete all as spd as directed

S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4

S&F 200 mm long Stainless Steel glossy finish handles with SS screw, complete all as specified and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed.

S&F 150 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius,complete all as specified.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

M&L for Bands, straps, supports or staysfor rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, White Colour, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, White Colour, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.

S&F vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe, complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F fancy type chromium plated brass two way bib cock with Wall Flange suitable for 15mm bore pipe complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.

S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.

S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S&F fancy type 150mm size square brass CP shower rose all as specified

S&F 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as spd as directed

S&F Fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&F vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.

S&F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360 x 675 x 750 mm, S Trap-300 mm make Jaguar or equivalent including making good to floor complete all as specified and directed.

S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.

S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed. Model :ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1"

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. Make hindware or equivalent as approved by GE

S&F Viterous China urinals incl fish eye, bowl type (back to corner wall type), complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) large size 590X390X 375 mm including Waste pipe complete all as specified and direted.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed .

S&F PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and directed.

S&F 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

M&L Removal of Existing Waterproofing Treatment and clean the surface. (a) Bonding Coat: Cleaning the surface with wire brush, water jet etc to remove dust, dirt etc. On clean surface applying a bonding coat of Asian paints Smartcare Multi Purpose Polymer mixed with cement (1:1.5) to reduce the existing surface porosity and as a bond coat for the new surface sceed on the top of the same. (b) Resurfacing : Applying and Laying a avg 15 mm thick layer of cementitious polymer modified mortar on the top of the bond coat as per manufacturer's instructions in existing gradient/ slope. Polymer will be added @ 8% to the weight of cement. Solid content of the polymer not less than 54%. The newly constructed surface to be cured with clean water at least for 10 days before applying WP membrane. (c) Surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of screed shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar, Making of Coves/ vata at the junction / corners in using MPP polymer mixed with cement : sand as per manufacturer's instruction for mortar & water curing the same. after curing period of 72 hours proceed with application of Polyurethane coating. (d) Liquid Applied WP Membrane: Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethene with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner). Epoxy primer will be done at consumption of 0.2Kg per sqmt.

Supply only Bleaching powder stable Gd - I confirming to IS - 1065/ ISO -9001 CM/L - 1650852

Supply only ferric Alum

Supply only copper Sulphate

S&F in repairs steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Construction of one Soakage well, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 m dia, 3.0 m depth.

Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, fly ash brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 10 users (shown on drawings )

M&L Reinforced concrete pipes 150mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and directed.

M&L for Cutting salt-glazed stoneware drain pipe 150 mm dia in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping, benching and surface channel complete all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4(using 20mm graded aggregate) as in cover slab (for man hole etc.) complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on fair faces of brick wall surfaces finished fair & even without using extra cement complete all as specified and directed

M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of plastic emulsion paint over a priming paint plaster coat complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of OBD on ceiling over 1mm thick cement based wall care complete all as specified and directed.

M&L for preparation of new plaster surface applying two coat of cement base paint over a coat of primer on wall surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of new wooden surface applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

All as per Srl item No 112 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

S&F switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.

S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.

S&F Lamp holder (batten/angle) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.

S &F LED luminaire round, 7/9 Watt, 220/230 Volts AC, ultra slim edge lit type, Surface type with high efficiency diffuser soft glare free light with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Ceiling rose, PVC / polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S&F LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser, heat sink integrated including one no. 10Watt SMD LED lamp complete all as specified and directed.

S & F LED Tube light fitting/Batten MS 1x 20 Watt ( T-8 ), 4' long, 230/240 Volts, AC decorative with driver, holder including retrofit LED T-8 polycarbonate Tube light 4' long connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S &F LED building security light fitting 25/30 Watt, 230 / 220Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete all as specified and directed.

S&F Exhaust fan AC single phase, metallic body, heavy duty, 230/240 Volts, of size 300mm sweep with louvers including making suitable size hole in the wall for air flow and grouting of nuts & bolts and washers including making connection with three core copper cable of size not less than 1.5 sqmm from ceiling rose complete all as specified & directed.

S & F GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete all as specified and directed.

S&F sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB single phase and neutral 32 A, 240Volt , B- curve complete all as specified and directed.

S&F MCB SP 6A-32A, 230V, 10KA 'B' curve type complete all as specified and directed.

S&F sheet metal enclousers (DBS) when MCBs to be used 4 way double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F ceiling fan 1200 mm sweep complete including electric connection with three core flexible PVC insulated copper conductor multistranded white in clour 1.0sqmm cable complete all as specified and as directed.

S & F LED Wall bracket type CITY-2 fitting 9 Watt complete all as specified and directed. Make: C&S/Havells/ Crompton

Supply and fix electric water heater (Geyser), storage type, white colour, steel body with copper inner tank and heating element 2 KW, capacity 25 litre, 5 Star rated with advanced 3 level safety complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed

Supply and fix Air termination, Single pointed aluminum rod 12mm dia and 300mm long complete all as specified and directed

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw.

Supply and fix Aluminum strip 25x3.15mm with saddles and fixing screw etc for roof conductors and down conductors above ground.

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire lead of 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed. Note No.1: The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC 1:2:4) type B1 cover 15 mm GI pipe ( medium grade for protection of earth lead and 20 mm dia GI pipe medium grade for wartering, Char coal , salt, wire mesh complete all as shown in electrical plate No 5 of SSR 1 connected to earthihng test point all as specified and testing on completion.

Supply and laying of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the axis of cable complete all as specified and directed.

Material and labour sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be gently punned down to 10 cm complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid)

Material and labour Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 25mm bore GI pipe for crossing the cable and making good both the ends all as specified and directed at site. Note :- GI pipe shall be measured and paid separately under respective item.

Supply & fix tube 25mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor.

Supply Laying, jointing, testing and commissioning of 6 sqmm 2.0 core cable in wall or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade of cross sectional area complete all as specified and directed.

M & L for cutting existing steel tubing upto 50mm dia and inserting suitable GI fittings etc for alterations/addition the branch connection complete all as specified and directed.

S&F 25 mm dia steel water tubing, galvanized, medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed

M/S R S Constructions

Jain construction co

Shikhar ji Enterprises

NOORI ENTERPRISSES

M/s M Aali construction co