Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.8 LAccepted-Finance | ₹25.8 L | L-1 | Accepted-Finance Lowest-1 |
| 2 | L-2₹26.1 L+₹36,650 (1.42%)Rejected-Finance | ₹26.1 L+₹36,650 (1.42%) | L-2 | Rejected-Finance Lowest-2 |
| 3 | L-3₹27.0 L+₹1.2 L (4.83%)Rejected-Finance | ₹27.0 L+₹1.2 L (4.83%) | L-3 | Rejected-Finance Lowest-3 |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | H.N.SINGH AND COMPANY L2 | VISHAVJEET SINGH L3 | JASPREET SINGH L1 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields errection and levelling at site, through all kinds of roads, approaches fields etc. in all leads and lifts completed in all respects as per the directions of Engineer - in-Charge. | 1 | Job | 35,000 ₹35,000 | 35,000 ₹35,000 | 30,000 ₹30,000 Lowest |
| 2.00Drilling of bore as per specifaction laid down in IS 2800-1991 (part-I) with upto-date ammendments, if any,with Direct Rotary Rig or combination drilling rig,Precussion Rig starting with 650-600 mm dia M.S pipe reduced to 300-200 mm dia M.S pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, in all kind of soils, boulders, rocks, collapsible strata,saturated soils, artesian conditions including the cost of all consumable, stores, water, fuel, lubricants and other accessories etc. complete in all respect as per the directions of the Engineer -in -Charge. | ||||||
| 2.01 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | 9,500 ₹2,85,000 Lowest | 10,000 ₹3,00,000 | 9,500 ₹2,85,000 Lowest |
| 2.02 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | 9,500 ₹2,85,000 Lowest | 10,000 ₹3,00,000 | 10,000 ₹3,00,000 |
| 2.03 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | 10,000 ₹3,00,000 Lowest | 10,000 ₹3,00,000 Lowest | 10,500 ₹3,15,000 |
| 2.04 | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 90-125 mtrs below ground level with in all leads and lifts. | 35 | Mtrs. | 10,000 ₹3,50,000 Lowest | 10,000 ₹3,50,000 Lowest | 11,000 ₹3,85,000 |
| 3.00 | Collection, preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. | 1 | Nos | 2,000 ₹2,000 | 2,000 ₹2,000 | 1,500 ₹1,500 Lowest |
| 4.00 | a) Supplying & Lowering of IS marked Electric Resistance Welded M.S.pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.9 mm bevelled edge conforming to IS 4270-2001 with upto date ammendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. with in all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 53 | Mtrs. | 9,000 ₹4,77,000 Lowest | 9,200 ₹4,87,600 | 9,000 ₹4,77,000 Lowest |
| 5.00 | Providing & Lowering of IS marked Electric Resistance Welded M.S.slotted pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.90 mm bevelled edges, conforming to I.S. 4270-2001 slot size 1.57x75mm welded with up-to-date ammendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. with in all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 18 | Mtrs. | 10,000 ₹1,80,000 | 10,500 ₹1,89,000 | 9,950 ₹1,79,100 Lowest |
| 6.00 | Supply and lowering at site Electric Resistance Welded (ERW) Stainless Steel Cage type "V" wire wound screens of size 300 mm,8 mm thick with slot opening 1.0 mm, as per IS 8110-2000 with upto date amendments, if any, and material specification as per AISI "American Iron and Steel Inst" Type Grade SS-304 in suitable lenghts as per site conditions, including the cost of SS socket 8 mm thickness of length 140 mm, confirming to AISI grade 304, suitable to accomodate screen and ring including jointing screen with blind pipes complete in all respects all scaffolding derricks, poles, clamps, embedding in foundation etc. including cost of all cutting threading and welding of pipes etc. within all leads and lifts complete in all respects as per the directions of the Engineer - in Charge.Screen will be of continuous trapezoidal wire spirally wound around fabricated cage. The wrapping wire having "V" shaped (Wedge) profile wire with flat surface on the outside and producing expanding slots on the inside of various dimensions, resistance welded to a cylindrical body made of number of longitudinal special high tensile support rods to provides smooth unrestricted bore which are in turn welded into cylindrical ring couplings on both sides of screens with in all leads and lifts complete in all respect as per the direction of the Engineer-in-Chrage. | 1 | Mtr. | - | - | - |
Tender Value
₹26.3 L
EMD Value
₹52,700
Closing Date
21 Apr 2026, 10:00 amClosed
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BOQ
2026_HPIPH_134197_1
EE-JSD-BGI/2026- 729-78 dt. 10/04/2026
Open Tender
Civil Works
Item Rate
90 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹2,000
₹52,700
18 Jul 2026
14 Apr 2026
21 Apr 2026
14 Apr 2026
21 Apr 2026
14 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Transportation of Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields errection and levelling at site, through all kinds of roads, approaches fields etc. in all leads and lifts completed in all respects as per the directions of Engineer - in-Charge. | 1 | Job | - | - |
| - | Drilling of bore as per specifaction laid down in IS 2800-1991 (part-I) with upto-date ammendments, if any,with Direct Rotary Rig or combination drilling rig,Precussion Rig starting with 650-600 mm dia M.S pipe reduced to 300-200 mm dia M.S pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, in all kind of soils, boulders, rocks, collapsible strata,saturated soils, artesian conditions including the cost of all consumable, stores, water, fuel, lubricants and other accessories etc. complete in all respect as per the directions of the Engineer -in -Charge. | - | - | - | - |
| - | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 0-30 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | - | - |
| - | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 30-60 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | - | - |
| - | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 60-90 mtrs below ground level with in all leads and lifts. | 30 | Mtrs. | - | - |
| - | Drilling and lowering of M.S. Casing pipe conforming to IS 4270-2001 with up-to-date ammendments,if any, of suitable sizes as mentioned above,from 90-125 mtrs below ground level with in all leads and lifts. | 35 | Mtrs. | - | - |
| - | Collection, preservaion and display of suitable size sample box with top lid and locking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. | 1 | Nos | - | - |
| - | a) Supplying & Lowering of IS marked Electric Resistance Welded M.S.pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.9 mm bevelled edge conforming to IS 4270-2001 with upto date ammendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. with in all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 53 | Mtrs. | - | - |
| - | Providing & Lowering of IS marked Electric Resistance Welded M.S.slotted pipe 300 mm dia nominal size housing, 8 mm thick having out side dia mtrs.323.90 mm bevelled edges, conforming to I.S. 4270-2001 slot size 1.57x75mm welded with up-to-date ammendments, if any ,about 4 mtrs to 7 mtrs in length, welded without any circumferential joints,into bore hole in vertical position including cost of all scaffolding derricks,poles,clamps embedded in foundation etc. including cost of all cutting,threading and welding of pipes etc. with in all leads and lifts, complete in all respects as per the directions of the Engineer -in-Charge. | 18 | Mtrs. | - | - |
| - | Supply and lowering at site Electric Resistance Welded (ERW) Stainless Steel Cage type "V" wire wound screens of size 300 mm,8 mm thick with slot opening 1.0 mm, as per IS 8110-2000 with upto date amendments, if any, and material specification as per AISI "American Iron and Steel Inst" Type Grade SS-304 in suitable lenghts as per site conditions, including the cost of SS socket 8 mm thickness of length 140 mm, confirming to AISI grade 304, suitable to accomodate screen and ring including jointing screen with blind pipes complete in all respects all scaffolding derricks, poles, clamps, embedding in foundation etc. including cost of all cutting threading and welding of pipes etc. within all leads and lifts complete in all respects as per the directions of the Engineer - in Charge.Screen will be of continuous trapezoidal wire spirally wound around fabricated cage. The wrapping wire having "V" shaped (Wedge) profile wire with flat surface on the outside and producing expanding slots on the inside of various dimensions, resistance welded to a cylindrical body made of number of longitudinal special high tensile support rods to provides smooth unrestricted bore which are in turn welded into cylindrical ring couplings on both sides of screens with in all leads and lifts complete in all respect as per the direction of the Engineer-in-Chrage. | 1 | Mtr. | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
FORM6_11.pdf
Tender Documents • 0.43 MB
TC.pdf
Tender Documents • 0.16 MB
BOQ_198453.xls
BOQ • 2.45 MB
CORRIGENDUM_21_4.pdf
PDF • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .