Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical as per tender doc |
| 2 | Accepted-Technical | Accepted-Technical as per tender doc |
Tender Value
₹13.0 L
EMD Value
₹25,994
Closing Date
10 Dec 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE(E) FTR HQ BSF TRIPURA
FTR HQ BSF TRA
Repair and maintenance of defective UG cable of 02 Nos Jawan Barracks Sos Mess, Adm Block Magazine building and hospital 124 Bn BSF campus Nalkata under SHQ BSF Panisagar
2025_BSF_887867_1
22/IGA/EE(E)/NIT/2025-26
Open Tender
Electrical Works
Percentage
60 days
Panisagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹25,994
11 Dec 2025
1 Dec 2025
11 Dec 2025
1 Dec 2025
10 Dec 2025
1 Dec 2025
Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5 x 120 sq.mm. direct in ground including excavation and refilling the trench but excluding sand cushioning & protective covering.
Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 3.5 x 50 sq.mm. direct in ground including excavation and refilling the trench but excluding sand cushioning & protective covering.
Supplying and Laying of one no PVC insulated/PVC sheathed XLPE power cable ,1.1 KV grade (heavy duty), armoured UG electric cable with aluminium conductor of size 3.5 x 120 sqmm in the existing masonry/open duct/in exisiting Conduit as required.
Supplying and Laying of one no PVC insulated/PVC sheathed XLPE power cable ,1.1 KV grade (heavy duty), armoured UG electric cable with aluminium conductor of size 3.5 x 50 sqmm in the existing masonry/open duct/in exisiting Conduit as required.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 80 mm
Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required
Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm
SITC of outdoor type joint box, Single door made out of 16 SWG CRCA sheet duly painted with powder coated of size 450 mm x 450 mm x 300 mm deep having 160 amps, 04 nos insulated aluminium bus bars and suitable size insulator, front door openable & angle iron base frame of size 450 mm x 300 mm with 600 mm long legs made out of 45 mm x 45 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required. As per direction of Engineer-In-Charge
SITC of water protected outdoor type compartmentalized hut type double door cubical panel of 900 mm x 650mm x 400mm depth suitable for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The panel having 160A/415V 4 strip aluminum bus bar duly PVC sleeved, separate detachable gland plate, angle iron base frame made out of 45mmx45mmx5mm angle iron of suitable size of the panel (minimum height 60cm)/suitable size iron base frame/Channel frame for placing on surface/cable trench as per site required, hinged door, with locking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation complete as required with following instruments mounted on it. (Panel should be as per design & drawing approved by Engg in charge) Instruments(Inside/outside) i ) 100 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nos ii) 63 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nos iii) 32 Amp FP SDF unit with DIN type fuse complete as required make-L&T or equivalent specification HPL/Schneider/L&T make - 01 Nos iv) 63 Amp DPMCB - DHMGCDPF063 (Havells) equivalent specification HPL/Schenider/L&T make- 02 Nos v) 32 Amp DPMCB - DHMGCDPF032 (Havells) equivalent specification HPL/Schenider/L&T make- 02 Nos vi) 3 Phase DIgital Ammeter, 96x96 flush mounting Make-L&T - 01 No vii) 3 Phase DIgital Voltmeter, 96 x 96 flush mounting Make-L&T - 01 No v) LED Pilot light (22.5 MM dia) - 03 Nos
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required
Add Labour Cess @1% on MR Items
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
BOQ_933215.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .