Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6 L
EMD Value
₹12,000
Closing Date
13 Oct 2026, 2:00 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
Office of the Executive Engineer Mechanical and Hospital Division Anantnag
Providing a Weather protective shed/ enclosure for safeguarding the VRV/ VRF installed at SDH Keller.
2026_PWDJK_326873_1
MHDA/TS/2026-27/66
Open Tender
Miscellaneous Works
Percentage
20 days
SDH Keller
Refer NIT
7 documents required · 7 mandatory
₹200
Executive Engineer M and H Division Anantnag
₹12,000
13 Oct 2026
2 Oct 2026
14 Oct 2026
2 Oct 2026
13 Oct 2026
2 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in bulk excavation by manual means over areas including disposal of excavated earth
lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. | 2 | Cum | 590 | ₹1,180 |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) | 8 | Cum | 7,275 | ₹58,200 |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form | 12 | Cum | 235 | ₹2,820 |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 2,700 | Kgs | 106 | ₹2,86,200 |
| 5 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.5 0.63 mm thick with zinc coating not less than 275 gram/m2 | 20 | Sqm | 1,340 | ₹26,800 |
| 6 | Providing and fixing Chain link fabric fancing mesh of size 25x25 mm made of G.I. wire of dia 3mm ,using welding. | 40 | Sqm | 370 | ₹14,800 |
| 7 | Supplying, installation, testing & commissioning of Outdoor Panel factory assembled weather proof/ Dust & Vermin Proof wall / floor mounted LT cubical type compartmentalized panel of Aluminum Busbar panel (CPRI Approved) fabricated out of 14 SGW/2 mm thick MS sheet, with locking arrangement, cable alleys, bus bar chamber etc powder coated self supported suitable for 3 phase 4 wire, AC supply, supplying & fixing following accessories as detailed below:-
400 Amp MCCB 2 Nos, 400 Amp Chane over Switch, Metering module 2 Nos and indicators. | 1 | Job | 2,10,000 | ₹2,10,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_1105713.xls
BOQ • 0.31 MB
ext1.pdf
PDF • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .