Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC 6 4 70 ADARSHNAGAR NEAR SHIVARAMPALLY RAILWAY STATION RAJENDRANAGAR RANGAREDDY 500077 | RANGA REDDY | TELANGANA | 500077 | ₹21.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹21.7 L+₹68,133.06 (3.25%)Rejected-Finance 6 4 70 ADARSH NAGAR SAI BABA NAGAR ARAMGHAR RAJENDRANAGAR RANGA REDDY TELENGANA PIN 500052 | RANGA REDDY | TELANGANA | 500052 | ₹21.7 L+₹68,133.06 (3.25%) | L2 | Rejected-Finance L2 |
| 3 | Rejected-Technical H NO 2 20 4 1 47 SRI RAM NAGAR OPP SUGUNA CHICKEN UPPAL MEDCHAL MALKAJGIRI TELANGANA 500039 | MEDCHAL MALKAJGIRI | TELANGANA | 500039 | - | - | Rejected-Technical The firm has not submitted required documents as per NIT |
| 4 | Rejected-Technical | - | - | Rejected-Technical The firm has not submitted required documents as per NIT |
| Sl No | Description | Qty | Unit | Komere Manoj Kumar L1 | K arjun kumar L2 |
|---|---|---|---|---|---|
| 1.00 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks | 1.15 | cum | 10,941.69 ₹12,582.94 Lowest | 11,000 ₹12,650 |
| 2.00 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | 15.28 | sqm | 407.88 ₹6,232.41 Lowest | 420 ₹6,417.6 |
| 3.00 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground, allcomplete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | 90.98 | sqm | 669.79 ₹60,937.49 Lowest | 700 ₹63,686 |
| 4.00 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick | 2,328.1 | sqm | 657.61 ₹15,30,981.84 Lowest | 675 ₹15,71,467.5 |
| 5.00 | Painting with aluminium paint of approved brand and manufacture to give an even shade: Two or more coats on old work | 2,328.1 | sqm | 117.47 ₹2,73,481.91 Lowest | 125 ₹2,91,012.5 |
| 6.00 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes. 110 mm | 412.5 | metre | 461.78 ₹1,90,484.25 Lowest | 475 ₹1,95,937.5 |
| 7.00 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door : 110x110x110 mm | 40 | each | 286.5 ₹11,460 Lowest | 300 ₹12,000 |
| 8.00 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° : 110 mm bend | 70 | Each | 183.96 ₹12,877.2 Lowest | 200 ₹14,000 |
Tender Value
₹21.5 L
EMD Value
₹43,100
Closing Date
27 Dec 2025, 10:00 amClosed
Commandant Engineer South Zone HQr CRPF at HYD
CONTRACT CELL SOUTH ZONE HQR CRPF HYDERABAD
Repair and waterproofing of CH PPM
2025_CRPF_890723_1
B.V-4/2025-26-SZ-Works (CH PPM) Minor Work T/032
Open Tender
Civil Works
Item Rate
60 days
Composite Hospital -CH- CRPF Pallipuram Kerala
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹43,100
23 Jun 2026
20 Dec 2025
29 Dec 2025
20 Dec 2025
27 Dec 2025
20 Dec 2025
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground, allcomplete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
Painting with aluminium paint of approved brand and manufacture to give an even shade: Two or more coats on old work
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door : 110x110x110 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° : 110 mm bend
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.73 MB
BOQ_936234.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .