SPECIAL REPAIRS TO DCN (KOCHI) P-270 NAVAL BASE, PROVISION OF CHAIN LINK FENCING AND PATH AROUND DUMPING YARD AT INS GARUDA UNDER GE(NW) KOCHI

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as per item No.1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) . hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.

S & F 4mm thick coloured/wooden grain aluminium composite panel (approved by Engr-in-Charge) complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification and drawing complete all as specified and directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing all as specified.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed.

S & F 100 mm long SS butt hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 150 mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 200mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F in repair Aluminium extreded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Aluminum snap grid false ceiling with grid 605x605mm size including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long includng 6mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with stainless steel screws complete all as specified and directed.

Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for Light shade Vitrified ceramic tiles 8-10mm thick (square /rectangular) area of each tiles exc 0.42 Sqm but not exc 1 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 laying floor finishes, complete all as specified and directed Note: The quoted rate shall be inclusive of screed bed

M&L for Vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles exc 0.42 Sqm but not exc 1 Sqm as in skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat in CM 10mm thick 1:3 complete all as specified and directed Note: The quoted rate shall be inclusive of backing coat

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and joints filled with epoxy joint filler , over and including15mm thick screed bed of CM 1:4 all as specified and directed. Notes: 1.The quoted rate shall be inclusive of screed bed 2. Epoxy joint filling shall be measured and paid seperately

M & L for epoxy tile joint filling on floor and walls complete as per the manufactures instructions

M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/ 600x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed Note: The quoted rate shall be inclusive of backing coat

M&L for preparation and complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of 1.5 mm thick wall care putty and one coat of alkali resistant primer complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation of old ceiling surface and applying one coat of white wash complete all as specified and directed

M&L for Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof antifungal paint over a coat of suitable primer over 1.5mm thick wall care putty, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for ornamental and intricate design conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, on steel surfaces complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge. Note: The quoted rate shall be inclusive of screed bed

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc.complete all as specified and directed

S&F of stainless steel alphabet (size 1000mm*350mm*150mm) for letter on main gate in English & Hindi complete all as specified and directed

M&L for preparation of old surfaces of steel and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and 32mm PVC waste pipe and including 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including fixing with trap including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 8 to 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe complete all as specified and directed.

S&F in Vitreous china urinal partition white of size 310x700 mm with Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed.

S&F in repair brass CP towel Rail 600mm long "D" type complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floorcomplete all as specified and directed by Engr-in-Charge.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Demolition of Brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed

M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primer to newly plastered surface including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Taking down Wall panelling and similar work complete all as specified and directed

S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed Note : PVC frame shall be measured and paid seperately

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed

S&F in repairs for Ball bearing for rolling shutters complete all as specified and directed by Engr-in-Charge.

Repairs to rolling shutter of any size and including greasing, oiling complete all as specified and directed by Engr-in-Charge.

S&F aluminum powder coated door shutter with frames of size - 44.5mmx50mmx1.5 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 63.5mmx 38.10mm x1.5 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. Note: (Rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters shall be inclusive of the quoted rate )

S&F aluminum powder coated parttion fixed/sliding type with frames of size -side , top rail and intermidiate sections size 63.50mmx38.10mmx1.5 mm , incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. Note: (Rates for 5 mm thick tinted glass / 4mm thick coloured aluminium composite panels reqd to be fitted in shutters shall be inclusive of the quoted rate)

Surface excavation n exc 15cm deep in soft/loose soil complete all as specified and as directed.

Material and labour for hardcore of gauge exceeding 63mm but not exceeding 100mm broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed

Removing excavated material exc. 250m and not exceeding 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Material and labour for 100mm thick plain cement concrete 1:4:8 (40mm graded stone aggregate) type D2, as in sub base complete all as specified and directed

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment,over and including 50mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick Add for well ramming including watering as required complete all as specified and as directed.

Material and labour for PCC 1:2:4 , type B0 using 12.5mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Excavating in post holes each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed earth around, in layers n.exc.25cm in hard/dense soil complete all as specified and as directed

S&F angle iron posts and strusts in fencing including cutting tops to shape as directed in fillets (including securing barbered wire etc) including all necessary drilling, bolting and revetting etc. Fe 410 W(Gde-E-250) quality B complete all as specified and as directed

S&F PVC coated galvanised iron chain link fencing weighing 4kg/Sqm of grid size 50mm x 50mm with 4mm dia wire including straining bolts, etc. and provision of binding wire fixing to fencing post complete all as specified and directed

S&F for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exc 5cm long and diameter of neck 5 to 10mm complete all as specified and directed

M & L for preparation of steel surface of any description or 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer for new surfaces complete all as specified

M&L for mild steel work as in gate as directed, fabricated out of M S rolled sections, tubes ,flat iron, square, and twisted bars, decorative leaves, hand made aldrop bolts, tower bolts and hinges to suit the design including fixing the gate with MS frame work all as directed

M&L for cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Supply and fix in repair on wall/ceiling/floor high pressure CPVC pipes of size 20 mm dia, SDR-11 & plain CPVC SDR 11 fittings including all necessay fittings, solvents complete all as specified and directed.

Supply and fixing in repair of Bib cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge. (Make : Model No F2008151 of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in repair of Bib cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge. (Make : Model No F2008152 of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in repair of concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge. (Make : Model NO: F2002362 of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in repair of 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2008201 of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in repair of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and as directed by the Engineer-in-charge. (Make : Model No: F7020104CH of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in reapir PVC connection pipe 15 mm dia (outer 450mm long cold water complete with brass union on both sides to suit 15mm GI/CPVC pipe complete all as specified and directed

Supply and fixing in reapir of health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , complete all as specified and directed by engr in charge (Make : Model No: F8030107AB of Cera or its equivalent make from the approved list of manufacturers)

S& F in repair of CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

Supply and fixing of concealed flush/push cock regular body, wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO:F8010106 of Cera or its equivalent make from the approved list of manufacturers )

Supply and fixing in repairs 2000 litres capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical, vertical with closed top), 3 layered, white in colour, hoisted & fixed in position, complete all as specified and as directed.

Supply and fixing in repairs float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all specified and directed by Engnieer in Charge.

S&F in repair for PVC connection 15mm size with PTMT nut of length 600 mm complete all specified and directed by Engnieer in Charge.

Taking down carefully existig copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed

All as per item No. 93 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.

All as per item No. 93 here-in-before One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No. 93 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable.

All as per item No. 93 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable.

S&F for Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F for Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed

S&F for Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed.

S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed

S&F LED Batten CRCA enclosed channel box type for LED T8 Retrofit tube 1x20 Watt, 4 feet, 220-240 Volts, Industrial grade aluminium extrusion duly powder coated fitted with lamp holder at both side to mount LED T8 retrofit tube rod (with tube rod) high lumen LEDs and milky opal diffuser for glare free light including provision of flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make- Shakti, Cat Part No. SZSRFBT1x20 or its equivalent make from the list of manufacturers complete all as specified and directed

S&F in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in replacement of Factory made three phase and neutral sheet steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming MCCBs and outgoing MCB the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 415V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F in replacement of Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCCB FP, 125 Amps, 415 volts,rated service short circuit breaking capacity Ics= Icu at 415V ,27 KA duly ISI marked, in DB, complete with connection testing and commissioning all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "B" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-40 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

M&L for Sub main wiring with four single core 4x10 Sqmm FRLSH insulated and sheathed stranded copper conductor alongwith earth wire 10 Sqmm drawn in FRLSH rigid conduit connected to main board complete all as specified and directed (Four runs cable and one number earth wire and suitable FRLSH conduit shall measured together as unit length).

M&L for Sub main wiring with two single core 2x6 sqmm FRLSH insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLSH rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLSH conduit shall measured together as unit length).

S&F in replacement of ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to fan of suitable length giving connection complete all as specified. Make shall be of Havells Cat part No Efficiencia Neo (BLDC 26W) or its equivalent make from the approved list of makes Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard.

S&F in replacement of exhaust fan steel body heavy duty with louvers complete of sweep size 300 mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan of suitable length for giving connection complete all as specified. Note : Old fans to be deposited at AGE E/M (NW) store yard.

S&F in replacement of exhaust fan plastic body heavy duty with louvers complete of sweep size 250mm, 1200 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan suitable length for giving connection complete all as specified. Note : Old fans to be deposite at AGE E/M (NW) store yard.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed

Supply, laying and testing in repairs cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 4 core complete all as specified

M&L for Galvanised coated cable tray size 70x200x75mm for laying of fire sensor, telephone cable & equipment cables complete all as specified

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft soil complete all as specified and directed by eng-in-charge

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by eng-in-charge

Supply, fill, Spread and ramming / consolidation in layers, dry river sand in trenches for cushioning and covering of UG cables all as directed.

Removal of excavated soil to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as directed.

MS BUILDERS (BID ID -3361006)

POOJA ENGINEERING WORKS (BID ID -3360731)

K THOMAS AND COMPANY (BID ID -3360279)

K.V.GEORGE AND COMPANY (BID ID -3369081)

M/s ANTONY THOMAS AND CO (BID ID -3360922)